Search

Abstract: The growth of CuO nanosheet arrays on Cu foil was demonstrated. The morphology and structure of the CuO were examined by scanning electron microscopy and X-ray diffraction spectroscopy. The catalytic performance of the obtained CuO/Cu electrode for hydrogen peroxide electroreduction in 3.0moldm−3 KOH was evaluated by means of cyclic voltammetry and chronoamperometry. The CuO/Cu electrode shows an onset potential for H2O2 electroreduction comparable to Co3O4 nanowire arrays grown on Ni foam and around 100mV more negative than precious metal catalysts, such as Pt and Pd, demonstrating its good catalytic activity for H2O2 electroreduction. The stabilized mass current density for H2O2 electroreduction on the CuO/Cu electrode at −0.3V reached about 57% of that on Co3O4 nanowire arrays grown on nickel foam. Compared to conventional fuel cell electrodes fabricated by mixing active materials with conducting agents and polymer binders, this electrode of CuO nanosheet arrays directly grown on Cu has superior mass transport property, which combining with its low-cost and facile preparation, make it a promising electrode for fuel cell using H2O2 as the oxidant. [Copyright &y& Elsevier]

Abstract: Nanowire arrays of mixed oxides of Co and Ni freely standing on Ni foam are prepared by a template-free growth method. The effects of Ni content on the morphology, structure and catalyst performance for oxygen evolution reaction are investigated by scanning electron microscopy, X-ray diffraction spectroscopy and electrochemical techniques including cyclic voltammetry, chronopotentiometry and electrochemical impedance spectroscopy. A transformation from nanowire arrays to nanoplate arrays is found with the increase of the atomic ratio of Ni to Co in the preparation solution. The NixCo3−xO4 electrode obtained at 1:1 of Ni:Co in the preparation solution exhibits nanowire array structure and has better catalytic performance for oxygen evolution reaction than other NixCo3−xO4 and Co3O4 electrodes. The catalytic activities of the NixCo3−xO4 and Co3O4 electrodes are correlated with their surface roughness. Superior stability of the NixCo3−xO4 nanowire array electrode is demonstrated by a chronopotentiometric test. The reaction orders with respect to OH− on the NixCo3−xO4 electrode are close to 2 and 1 at low and high overpotentials, respectively. [Copyright &y& Elsevier]

Abstract: Au/Ni-foam electrodes with three dimensional network structures are prepared by simple spontaneous deposition of nano-sized Au particles onto nickel foam surface in an aqueous solution of AuCl3. Their morphology and catalytic performance for NaBH4 electrooxidation and H2O2 electroreduction in NaOH solution are investigated. Au particles with diameters smaller than 100nm are uniformly deposited on the whole surface of all skeletons of the nickel foam substrate. The onset potential for NaBH4 electrooxidation and H2O2 electroreduction is about −1.2V and −0.1V, respectively. A direct liquid feed alkaline NaBH4–H2O2 fuel cell is constructed using Au/Ni-foam electrode as both the anode and the cathode. The effects of the concentration of NaBH4 and H2O2 and operation temperature on the fuel cell performance are investigated. The fuel cell exhibits an open circuit voltage of about 1.07V and a peak power density of 75mWcm−2 at a current density of 150mAcm−2 and a cell voltage of 0.5V operating on 0.2moldm−3 NaBH4 and 0.5moldm−3 H2O2 at 40°C. [Copyright &y& Elsevier]

In this paper, we report the three-dimensional self-supported CoMoO 4 nanosheet clusters on the nickel foam (denoted as CoMoO 4 /NF) by a facile hydrothermal-calcination method for efficient hydrogen generation. As a result, the freestanding CoMoO 4 electrode exhibits an efficient electrochemical activity towards hydrogen evolution reaction, showing overpotentials as low as 68 and 178 mV at current densities of 10 and 100 mA cm−2 in the alkaline condition (1 M KOH), respectively, a Tafel slope value of 82 mV per decade. Moreover, the electrode exhibits remarkable electrochemical durability for 1000 cycles. Significantly, the water splitting electrolyzer assembled with CoMoO 4 /NF || NiFe LDH/NF (the nickel iron layered double hydroxide supported on the nickel foam) system achieved 20 mA cm−2 at 1.63 V, showing the CoMoO 4 /NF is promising for practical water splitting applications. • The low-cost and effective transition metal oxide of CoMoO 4 was adopted for hydrogen generation. • The open nanostructure can facilitate permeating electrolyte as well as releasing hydrogen molecules. • The crosslinked nanosheet clusters can offer amounts of active sites for hydrogen evolution reaction. [ABSTRACT FROM AUTHOR]

Abstract At present, there is an urgent need for plentiful non-noble metal catalyst to substitute for valuableness platinum based metal catalyst in electrochemical water splitting. Here, we fabricated a three-demensional (3D) Ni Co NiCo 2 O 4 nanosheets electrocatalyst that directly grew on Ni foam firstly and then were reduced in 0.1 mol dm−3 sodium borohydride solution. This electrode exhibited high activity in 1.0 mol dm−3 KOH solution with an onset potential of ∼40 mV and a tafel slope of 77 mV dec−1. Furthermore, the Ni Co NiCo 2 O 4 /NF electrode showed a splendid durability during long-playing electrochemical test. Our work may provide an inexpensive, easy-to-obtain and excellent catalyst candidate for future electrolytic water research and industry studies that may involve hydrogen applications in the future. Highlights • The Ni Co NiCo 2 O 4 /NF is an inexpensive, easy-to-obtain and excellent electrode. • When the current density up to 10 mA cm−2 requires an overpotential 125 mV. • Metallic Ni and Co core enhance the electrode activity. [ABSTRACT FROM AUTHOR]

Thorn-like Ni@TiC NAs and flake-like Co@TiC NAs electrodes without any conductive agent and binder are simply fabricated by the potentiostatic electrodeposition of Ni and Co catalysts on the TiC nanowire arrays (NAs). The electrocatalytic activity of H 2 O 2 oxidation on the Ni@TiC NAs electrodes is better than that on the Co@TiC NAs electrodes. The Ni@TiC NAs electrodes demonstrate a rough surface and have many nano-needles on the rod edges, which assures the high utilized efficiency of Ni catalysts. These particular three-dimensional structures may be very suitable for H 2 O 2 electrooxidation. The anodic current of Ni@TiC NAs anode reaches 0.32 A cm −2 at 0.3 V in 1.0 M H 2 O 2 + 4 M KOH solution. The DPFCs employing Ni@TiC NAs anodes display the peak power density of 30.2 mW cm −2 and open circuit voltage of 0.90 V at 85.1 mA cm −2 with desirable cell stability at 10 mL min −1 flow rate and 20 °C, which is much higher than those previously reported. [ABSTRACT FROM AUTHOR]

Recently, direct borohydride fuel cell (DBFC) has been considering as a promising energy conversion devices. During the development of DBFC, reducing the use of noble metals and increasing the anode performance are the hot topic in recent researches. In this article, reduced graphene oxide nanosheets deposit on C@TiC coaxial nanowire array (rGO-C@TiC) by means of a combine method of chemical vapor deposition and electrodeposition is chosen as 3D current collector for Pd nanoparticles deposition. The morphology and crystal structure of the as-obtained 3D electrode is checked with FESEM, TEM, EDS, and XRD. Results claim that the as-prepared 3D electrode exhibits a mushroom-like structure with the mean diameter size of Pd is 5.32 nm. Their catalytic ability for NaBH 4 electro-oxidation is evaluated in a three electrode system by using the method of cycle voltammetry and chronoamperometry, proving that the 3D Pd-rGO-C@TiC electrode has a higher catalytic performance. The oxidation current density of 1.35 A cm −2 mg −1 Pd is achieved at −0.6 V. Furthermore, a direct borohydride-hydrogen peroxide fuel cell (DBHPFC) is assembled by using the as-prepared Pd-rGO-C@TiC electrode and a Pd/CFC electrode as anode and cathode catalyst, respectively, and a maximum power density of 68.5 mW cm −2 is obtained. In addition, the assembled DBHPFC shows excellent higher performance based on the mass activity basis (1427.1 W g −1 ) among those reported literatures, indicating that our Pd-rGO-C@TiC could be acted as a promising cost-effective and ponderable alternative catalyst for NaBH 4 electrooxidation. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) reduced graphene networks (RGN) were successfully fabricated on Ni foam without any conductive agents and polymer binders by dipping commercial Ni foam into graphene oxide (GO) suspension and subsequent a electroreduction process in a buffer solution. Au nanoparticles were then deposited on the RGN through an electrodeposition process to form a novel reduced graphene networks-Au (RGNA) electrode. The morphology and phase structure of the RGNA electrode are characterized by scanning electron microscope, transmission electron microscope and X-ray diffraction spectrometer. The NaBH 4 electrooxidation performance on the RGNA electrode is investigated by means of cyclic voltammetry and chronoamperometry. The RGNA electrode owns special hierarchical porous structure, rapid electron and ion transport, and large electroactive surface area due to the intrinsic electronic conductivity, mesoporous nature of graphene. The RGNA electrode exhibits a good stability during the electrochemical process and the oxidation current density at RGNA electrode reached 500 mA cm −2 at 0 V in the solution containing 0.1 mol dm −3 NaBH 4 and 2 mol dm −3 NaOH, which is higher than that at bare Au–Ni foam without graphene. The excellent structural stability and high catalytic performance for NaBH 4 electrooxidation make the RGNA a promising material for future energy systems. [ABSTRACT FROM AUTHOR]

Abstract: Activation of the MmNi4.03Co0.42Mn0.31Al0.24 hydrogen storage alloy electrode is performed by immersing the electrode in a solution containing 6.0moldm−3 NaOH and 0.1 mol dm−3 NaBH4. The effects of activation on the electrocatalytic activity of the electrode for NaBH4 oxidation are investigated by cyclic voltammetry and chronoamperometry. Immersion activation greatly improves the electrocatalytic activity of the alloy electrode. Hydrogen was absorbed in the alloy during the immersion activation treatment and its electrooxidation is responsible for the high initial oxidation current. The stabilized current mainly results from the direct oxidation starting from the borohydride species. The effects of activation on structure and surface chemistry of the alloy are also discussed. [Copyright &y& Elsevier]