Search

Aims: The aim of this study was to evaluate the performance of sampling methods [contact plates, sponges, and swabs] in the recovery of biofilm Listeria monocytogenes populations considering the seafood environment conditions (nature of conditioning, of materials and bacterial species)., Methods and Results: Different materials (stainless steel, polyvinyl chloride, polyurethane) were conditioned with two fish filtrates, the ready-to-eat the most consumed in Europe (smoked salmon, cod). After, we added the suspension of Listeria monocytogenes, alone or with Pseudomonas fluorescens or Carnobacterium strains, and incubated for 48 h at 8 °C. Then, the 48 h-biofilms were sampled with different methods (contact plates, sponges, and swabs). The cultivable bacterial populations were enumerated on agar, while the L. monocytogenes total and viable populations were quantified by qPCR and propidium monoazide-qPCR (PMA-qPCR), respectively. The amount of L. monocytogenes in biofilms was affected only by the nature of the conditioning with lowest adherent bacteria with cod versus with smoked salmon conditioning. Considering the amount of total population, the swab displayed the lowest values versus the sponges and the contact plates. An explanation was that the observations of the swab by microscopy showed the bacteria trapped within it. The recovery of cultivable bacterial populations was not significantly different with the three sampling methods. On the contrary, we showed that the VBNC populations were only detached by two of three methods (contact plates, sponges) while for the dead populations, those were contact plates and swabs., Conclusions: The nature of the conditioning influenced the amount of the bacteria in biofilms. And the performance of the recovery of the bacterial populations (dead, VBNC, cultivable) was dependent on the methods used., Significance and Impact of the Study: This study showed that the seafood environmental conditions influenced the biofilm formation and the assessment of the efficiency of cleaning and disinfectant operations could be significantly affected by the used sampling methods., Competing Interests: Declaration of competing interest The authors have no conflict of interest to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The present study compared different concentrations of propidium monoazide (PMA), time of exposure to light and different light intensities to determine the optimal conditions for the quantification of viable Escherichia coli in cell suspension and in food matrix. The influence of cell density and the effectiveness of PMA in viable but non-culturable (VBNC) E. coli cells were evaluated and also applied in food matrix. For that purpose, different concentrations of PMA (20 μM, 40 μM, 50 μM, 60 μM and 80 μM) under different times of exposure (5 min, 10 min, 15 min, 20 min and 30 min) to lights of different intensities (500 W and 650 W) were evaluated. After determining the optimal conditions, the PMA-qPCR methods were applied to different compositions of live and heat-killed E. coli suspensions (v:v; 0:1; 1:0; 1:1) in concentrations ranging from 3 Log to 7 Log CFU/mL. The same dilutions were prepared with E. coli in VBNC state and applied in food matrix. The results obtained from qPCR, PMA-qPCR and plate counts were compared. The results suggested that a PMA treatment of 50 μM PMA for 15 min under 650 W light intensity was optimal under our conditions. For E. coli cell suspensions, the amplification of heat-killed cells was inhibited greatly by PMA when concentrations were ≤ 5 Log CFU/mL. For the samples of oyster inoculated with heat-killed cells, E. coli was not detected by PMA-qPCR in concentrations ≤4 Log CFU/g. Regarding the results with VBNC state, we considered the PMA-qPCR method to be applicable for enumerating E. coli VBNC cells in oyster samples. Based on our findings, we further recommend the use of PMA-qPCR with the aim of reducing the amplification of dead cells for improving its performance, since false-positives could still occur depending on the level of E. coli in the sample. The application of the PMA-qPCR for quantification of bacteria, compared to the use of culture-dependent methods, is quite promising. However, further studies are recommended, especially using different food matrices., Competing Interests: Declaration of competing interest The authors declare that there is no conflict of interests regarding the publication of this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This study was designed to assess the efficiency of eight extraction methods regarding their ability to release superficial (exogenous) and intracellular (endogenous) DNA from B. cereus spores for subsequent analysis by quantitative PCR (qPCR). B. cereus spore suspensions were subjected to both commercial DNA extraction kits and mechanical DNA extraction methods. The spores were observed by transmission electron microscopy to evaluate any damage caused during extraction. The efficiency of both extraction and purification were assessed using a qPCR assay targeting the bclA gene. Most of the extraction methods assessed, except the passage through the French press or the use of the QIAamp DNA Blood Mini kit without 95°C treatment, allowed the amplification of significant amounts of DNA. By using propidium monoazide, which is a photoreactive DNA-binding dye, the presence of non-negligible amounts of amplifiable DNA at the spore surface was highlighted. A further set of extraction assays was then performed on spores previously treated with PMA. The results of this study show that both superficial and intracellular spore DNA can be released by extraction methods to a greater or lesser extent and then further amplified by qPCR. The Precellys extraction allowed the detection of both intracellular and superficial DNA, the DNeasy Blood & Tissue kit the specific detection of intracellular DNA, while the Instagene kit detected only superficial DNA. Of the methods tested in this study, the Precellys extraction was the most efficient in terms of further DNA detection., Significance and Impact of the Study: In order to verify the presence or absence of B. cereus spores in food or on surfaces in the food environment, the use of an efficient extraction method is required, followed by a qPCR analysis on the DNA released. Conversely, in order to quantify the population of Bacillus spores, any superficial DNA must be blocked, e.g. with PMA, prior to intracellular DNA extraction and further amplification., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Propidium monoazide (PMA) coupled with qPCR has been successfully used for specific quantification of viable bacteria cells in diverse matrices food. The present study aimed to develop PMA-qPCR assay for quantification of Lactobacillus paracasei viable cells in probiotic yoghurt. L. paracasei grown in culture medium was submitted to heat treatment at 60°C for different periods of time and probiotic yoghurt containing L. paracasei were prepared and stored at 4°C for 30days. The viable cells were quantified using qPCR and PMA-qPCR assays targeting tuf gene and also by plate counting. Standard curves were prepared and mean efficiency obtained was 94% and 96% (R 2 >0.98) to L. paracasei in culture medium and probiotic yoghurt stored one day, respectively. The limit of detection (LOD) for both samples was 10 4 genome copies, corresponding to 32.1pg of DNA. For viable cells quantification, standard curves Cq versus log CFU were plotted using mean CFU by plate counting of L. paracasei grown in culture medium and probiotic yoghurt. Results obtained for L. paracasei heat-treated cells were concordant by PMA-qPCR and plate count, CFU decreased as the heat treatment time increased, while qPCR count remained constant. L. paracasei enumerations obtained by qPCR for probiotic yoghurt stored one day and 30days were higher than enumerations by PMA-qPCR for the same samples. The plate count values were similar to CFU values obtained by PMA-qPCR. These results showed that PMA-qPCR is a powerful approach compared with culture-dependent methods for quantification of L. paracasei viable cells in yoghurt. PMA-qPCR allowed reliable obtained results much faster than plate counting., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Biofilms of Lactobacillus plantarum are a potential source for contamination and recontamination of food products. Although biofilms have been mostly studied using single species or even single strains, it is conceivable that in a range of environmental settings including food processing areas, biofilms are composed of multiple species with each species represented by multiple strains. In this study six spoilage related L. plantarum strains FBR1-FBR6 and the model strain L. plantarum WCFS1 were characterised in single, dual and multiple strain competition models. A quantitative PCR approach was used with added propidium monoazide (PMA) enabling quantification of intact cells in the biofilm, representing the viable cell fraction that determines the food spoilage risk. Our results show that the performance of individual strains in multi-strain cultures generally correlates with their performance in pure culture, and relative strain abundance in multi-strain biofilms positively correlated with the relative strain abundance in suspended (planktonic) cultures. Performance of individual strains in dual-strain biofilms was highly influenced by the presence of the secondary strain, and in most cases no correlation between the relative contributions of viable planktonic cells and viable cells in the biofilm was noted. The total biofilm quantified by CV staining of the dual and multi-strain biofilms formed was mainly correlated to CV values of the dominant strain obtained in single strain studies. However, the combination of strain FBR5 and strain WCFS1 showed significantly higher CV values compared to the individual performances of both strains indicating that total biofilm formation was higher in this specific condition. Notably, L. plantarum FBR5 was able to outgrow all other strains and showed the highest relative abundance in dual and multi-strain biofilms. All the dual and multi-strain biofilms contained a considerable number of viable cells, representing a potential source of contamination., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Transmitted through the fecal-oral route, the hepatitis A virus (HAV) is acquired primarily through close personal contact and foodborne transmission. HAV detection in food is mainly carried out by quantitative RT-PCR (RT-qPCR). The discrimination of infectious and inactivated viruses remains a key obstacle when using RT-qPCR to quantify enteric viruses in food samples. Initially, viability dyes, propidium monoazide (PMA) and ethidium monoazide (EMA), were evaluated for the detection and quantification of infectious HAV in lettuce wash water. Results showed that PMA combined with 0.5% Triton X-100 (Triton) was the best pretreatment to assess HAV infectivity and completely eliminated the signal of thermally inactivated HAV in lettuce wash water. This procedure was further evaluated in artificially inoculated foods (at concentrations of ca. 6×10(4), 6×10(3) and 6×10(2)TCID50) including lettuce, parsley, spinach, cockles and coquina clams. The PMA-0.5% Triton pretreatment reduced the signal of thermally inactivated HAV between 0.5 and 2 logs, in lettuce and spinach concentrates. Moreover, this pretreatment reduced the signal of inactivated HAV by more than 1.5 logs, in parsley and ten-fold diluted shellfish samples inoculated at the lowest concentration. Overall, this pretreatment (50 μM PMA-0.5% Triton) significantly reduced the detection of thermally inactivated HAV, depending on the initial virus concentration and the food matrix., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Dilution plating is the quantification method commonly used to estimate the population level of postharvest biocontrol agents, but this method does not permit a distinction among introduced and indigenous strains. Recently, molecular techniques based on DNA amplification such as quantitative real-time PCR (qPCR) have been successfully applied for their high strain-specific detection level. However, the ability of qPCR to distinguish viable and nonviable cells is limited. A promising strategy to avoid this issue relies on the use of nucleic acid intercalating dyes, such as propidium monoazide (PMA), as a sample pretreatment prior to the qPCR. The objective of this study was to optimize a protocol based on PMA pre-treatment samples combined with qPCR to distinguish and quantify viable cells of the biocontrol agent P. agglomerans CPA-2 applied as a postharvest treatment on orange. The efficiency of PMA-qPCR method under the established conditions (30μM PMA for 20min of incubation followed by 30min of LED light exposure) was evaluated on an orange matrix. Results showed no difference in CFU or cells counts of viable cells between PMA-qPCR and dilution plating. Samples of orange matrix inoculated with a mixture of viable/dead cells showed 5.59log10 CFU/ml by dilution plating, 8.25log10 cells/ml by qPCR, and 5.93log10 cells/ml by PMA-qPCR. Furthermore, samples inoculated with heat-killed cells were not detected by dilution plating and PMA-qPCR, while by qPCR was of 8.16log10 cells/ml. The difference in quantification cycles (Cq) among qPCR and PMA-qPCR was approximately 16cycles, which means a reduction of 65,536 fold of the dead cells detected. In conclusion, PMA-qPCR method is a suitable tool for quantify viable CPA-2 cells, which could be useful to estimate the ability of this antagonist to colonize the orange surface., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Escherichia coli O157:H7 associated with food has caused many serious public health problems in recent years. However, only viable cells of this pathogen can cause infections, and false-positive detection caused by dead cells can lead to unnecessary product recalls. The objective of this study was to develop and optimize a method that combines propidium monoazide (PMA) staining with real-time PCR to detect only viable cells of E. coli O157:H7 in ground beef. PMA is a DNA intercalating dye that can penetrate compromised membranes of dead cells and bind to cellular DNA, preventing its amplification via a subsequent PCR. Three strains of E. coli O157:H7 (505B, G5310 and C7927) at concentrations of 10(0) to 10(8)CFU/mL were used as live cells. Dead cells were obtained by heating cell suspensions at 85°C for 15 min. Suspensions were treated with PMA and the optimized assay was applied to artificially contaminated ground beef with two different fat contents (10% and 27%). DNA was extracted and amplified by TaqMan® real-time PCR assay targeting the uidA gene for detection of E. coli O157:H7. Plasmid pUC19 was added as an internal amplification control (IAC). A treatment of 25 μM PMA with a 10-min light exposure on ice was sufficient to eliminate DNA from 10(8) dead E. coli O157:H7 cells/mL. The optimized assay could detect as low as 10(2) CFU/mL viable E. coli O157:H7 in pure culture and 10(5) CFU/g in ground beef, in the presence of 10(6)/mL or g of dead cells. With an 8-h enrichment, 1 CFU/g viable E. coli O157:H7 in ground beef was detectable without interference from 10(6) dead cells/g. In conclusion, the PMA real-time PCR could effectively detect viable E. coli O157:H7 without being compromised by dead cells., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Alternaria is a common contaminating genus of fungi in fruits, grains, and vegetables that causes severe economic losses to farmers and the food industry. Furthermore, it is claimed that Alternaria spp. are able to produce phytotoxic metabolites, and mycotoxins that are unsafe for human and animal health. DNA amplification techniques are being increasingly applied to detect, identify, and quantify mycotoxigenic fungi in foodstuffs, but the inability of these methods to distinguish between viable and nonviable cells might lead to an overestimation of mycotoxin-producing living cells. A promising technique to overcome this problem is the pre-treatment of samples with nucleic acid intercalating dyes, such as propidium monoazide (PMA), prior to quantitative PCR (qPCR). PMA selectively penetrates cells with a damaged membrane inhibiting DNA amplification during qPCRs. In our study, a primer pair (Alt4-Alt5) to specifically amplify and quantify Alternaria spp. by qPCR was designed. Quantification data of qPCR achieved a detection limit of 10(2)conidia/g of tomato. Here, we have optimized for the first time a DNA amplification-based PMA sample pre-treatment protocol for detecting viable Alternaria spp. cells. Artificially inoculated tomato samples treated with 65μM of PMA, showed a reduction in the signal by almost 7cycles in qPCR between live and heat-killed Alternaria spp. conidia. The tomato matrix had a protective effect on the cells against PMA toxicity, reducing the efficiency to distinguish between viable and nonviable cells. The results reported here indicate that the PMA-qPCR method is a suitable tool for quantifying viable Alternaria cells, which could be useful for estimating potential risks of mycotoxin contamination., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The use of propidium monoazide (PMA) is enjoying increased popularity among researchers in different fields of microbiology. Its use in combination with real-time PCR (qPCR) represents one of the most successful approaches to detect viable cells. PMA-qPCR has successfully been used to evaluate the efficacy of various disinfection technologies in different microorganisms. Initially, in this study the effect of four essential oils (EOs), cumin, clove, oregano and cinnamon, was evaluated on suspensions of the enterohemorrhagic Escherichia coli O157:H7 by PMA-qPCR, LIVE/DEAD BacLight flow cytometry analysis (LIVE/DEAD-FCM), and plate count. E. coli O157:H7 cells treated with EOs at killing concentrations were permeable to PMA which was confirmed by LIVE/DEAD-FCM. However, the PMA-qPCR assay allows specific quantification among the autochthonous microbiota of food products. Therefore, the PMA-qPCR assay was used to evaluate its applicability in artificially contaminated iceberg lettuce and soya sprouts. Amplification signal was negative for the spiking tests performed with any of the EO-killed E. coli cells. It demonstrates that the PMA-qPCR assay is a suitable technique for monitoring E. coli O157:H7 inactivation by essential oils in fresh-cut vegetables., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Cryptosporidium parvum is a protozoan parasite capable of causing massive waterborne outbreaks. This study was conducted to model the transfer of C. parvum oocysts from contaminated water via food contact surfaces into yogurt and ice-cream, as well as to examine oocyst survival. Propidium iodide staining, combined with a direct immunofluorescence assay, was used for oocyst viability determination. Oocysts were recovered from milk products by a sucrose flotation-based procedure, with average recoveries of 82.3, 60.7, and 62.5% from low (1%) fat milk, 9% fat ice-cream, and 98% fat-free yogurt, respectively. Oocysts were also recovered, by rinsing with tap water, from stainless steel surfaces inoculated with oocyst suspension, with average recoveries of 93.1% when the surface was still wet and 69.0% after the surface had air-dried at room temperature. Viability of oocysts on the surface was significantly affected by desiccation; 5% of the oocysts remained viable after 4 h of air-drying at room temperature, while the proportion of viable oocysts was 81, 69, and 45% after air-drying for 10 min, 1 h, and 2 h, respectively. In contrast, oocyst viability only dropped from 82 to 75% after 30 min contact at room temperature with 5% bleach solution (equivalent to 0.26% NaOCl). Transfer of oocysts from milk and stainless steel surfaces into yogurt, and oocyst survival during the process were analyzed. Yogurt was made from pasteurized low fat milk and live yogurt starter by incubating at 37 degrees C for 48 h and then stored at 4 degrees C. Oocyst viability decreased from 83% (80%) to approximately 60% after 48 h at 37 degrees C and to approximately 58% following 8 days of storage, similar to oocyst survival in the controls using pasteurized milk without the addition of live yogurt. Oocyst survival in ice-cream was investigated by inoculating oocysts into ice-cream mix, and mixing and freezing in an ice-cream freezer, and hardening at -20 degrees C. Although approximately 20% (25 and 18%) of oocysts were viable before hardening, none were viable after 24 h at -20 degrees C. Control samples of oocysts suspended in distilled water and stored at -20 degrees C were taken at the same time intervals and 8% of the oocysts were still viable after 24 h.