Search

Per- and polyfluoroalkyl substances (PFASs) are a family of highly toxic emerging contaminants that have caught the attention of both the public and private sectors due to their adverse health impacts on society. The scientific community has been laboriously working on two fronts: (1) adapting already existing and effective technologies in destroying organic contaminants for PFAS remediation and (2) developing new technologies to remediate PFAS. A common characteristic in both areas is the separation/removal of PFASs from other contaminants or media, followed by destruction. The widely adopted separation technologies can remove PFASs from being in contact with humans; however, they remain in the environment and continue to pose health risks. On the other hand, the destructive technologies discussed here can effectively destroy PFAS compounds and fully address society’s urgent need to remediate this harmful family of chemical compounds. This review reports and compare widely accepted as well as emerging PFAS destruction technologies. Some of the technologies presented in this review are still under development at the lab scale, while others have already been tested in the field.

Microplastics (MP) are plastic particles less than 5 mm in size. There are two categories of MP: primary and secondary. Primary or microscopic-sized MP are intentionally produced material. Fragmentation of large plastic debris through physical, chemical, and oxidative processes creates secondary MP, the most abundant type in the environment. Microplastic pollution has become a global environmental problem due to their abundance, poor biodegradability, toxicological properties, and negative impact on aquatic and terrestrial organisms including humans. Plastic debris enters the aquatic environment via direct dumping or uncontrolled land-based sources. While plastic debris slowly degrades into MP, wastewater and stormwater outlets discharge a large amount of MP directly into water bodies. Additionally, stormwater carries MP from sources such as tire wear, artificial turf, fertilizers, and land-applied biosolids. To protect the environment and human health, the entry of MP into the environment must be reduced or eliminated. Source control is one of the best methods available. The existing and growing abundance of MP in the environment requires the use of multiple strategies to combat pollution. These strategies include reducing the usage, public outreach to eliminate littering, reevaluation and use of new wastewater treatment and sludge disposal methods, regulations on macro and MP sources, and a wide implementation of appropriate stormwater management practices such as filtration, bioretention, and wetlands.

Per- and polyfluoroalkyl substances (PFAS) are pollutants that have demonstrated a high level of environmental persistence and are very difficult to remediate. As the body of literature on their environmental effects has increased, so has regulatory and research scrutiny. The widespread usage of PFAS in industrial applications and consumer products, complicated by their environmental release, mobility, fate, and transport, have resulted in multiple exposure routes for humans. Furthermore, low screening levels and stringent regulatory standards that vary by state introduce considerable uncertainty and potential costs in the environmental management of PFAS. The recalcitrant nature of PFAS render their removal difficult, but existing and emerging technologies can be leveraged to destroy or sequester PFAS in a variety of environmental matrices. Additionally, new research on PFAS remediation technologies has emerged to address the efficiency, costs, and other shortcomings of existing remediation methods. Further research on the impact of field parameters such as secondary water quality effects, the presence of co-contaminants and emerging PFAS, reaction mechanisms, defluorination yields, and the decomposition products of treatment technologies is needed to fully evaluate these emerging technologies, and industry attention should focus on treatment train approaches to improve efficiency and reduce the cost of treatment.

India, the second largest agro-based economy with year-round crop cultivation, generates a large amount of agricultural waste, including crop residues. In the absence of adequate sustainable management practices, approximately 92 seems a very small number of metric tons of crop waste is burned every year in India, causing excessive particulate matter emissions and air pollution. Crop residue burning has become a major environmental problem causing health issues as well as contributing to global warming. Composting, biochar production and mechanization are a few effective sustainable techniques that can help to curtail the issue while retaining the nutrients present in the crop residue in the soil. The government of India has attempted to curtail this problem, through numerous measures and campaigns designed to promote sustainable management methods such as converting crop residue into energy. However, the alarming rise of air pollution levels caused by crop residue burning in the city of Delhi and other northern areas in India observed in recent years, especially in and after the year of 2015, suggest that the issues is not yet under control. The solution to crop residue burning lies in the effective implementation of sustainable management practices with Government interventions and policies. This manuscript addresses the underlying technical as well as policy issues that has prevented India from achieving a long-lasting solution and also potential solutions that have been overlooked. However, effective implementation of these techniques also requires us to look at other socioeconomic aspects that had not been considered. This manuscript also discusses some of the policy considerations and functionality based on the analyses and current practices. The agricultural waste sector can benefit immensely from some of the examples from other waste sectors such as the municipal solid waste (MSW) and wastewater management where collection, segregation, recycling and disposal are institutionalized to secure an operational system. Active stakeholder involvement including education and empowerment of farmers along with technical solutions and product manufacturing can also assist tremendously. Even though the issue of crop residue burning touches many sectors, such as environment, agriculture, economy, social aspects, education, and energy, the past governmental efforts mainly revolved around agriculture and energy. This sectorial thinking is another barrier that needs to be broken. The government of India as well as governments of other developing countries can benefit from the emerging concept of nexus thinking in managing environmental resources. Nexus thinking promotes a higher-level integration and higher level of stakeholder involvement that goes beyond the disciplinary boundaries, providing a supporting platform to solve issues such as crop residue burning.

Many developing countries have inadequate Municipal Solid Waste (MSW) management systems due to lack of not only the awareness, technologies, finances, but also a proper governance that is able to enforce and monitor the regulations. Not all the solutions practiced by and in developed countries fit to the developing country contexts. The local conditions and limitations must always be taken into account when proposing waste management options for developing countries. The excessively high organic waste fraction in MSW and relatively inexpensive labor markets available in developing countries are two of the strengths that have not yet been utilized fully. This manuscript is an attempt to point out the benefits we receive from the above two strengths if we establish organic waste buyback programs. This can only become successful if we find solutions to: (1) collect source-separated organic waste, and then (2) find stable markets for the products made from organic waste. Compost or biogas could be the best bet developing countries can consider as products. However, there must be some policy interventions to support buyback programs at the waste collection stage as well as at the product marketing stage. Implementation of such organic waste buyback centers that can offer some incentives can indirectly motivate residents to do source separation. This will in turn also help promote more recycling, as any waste bin that has no organics in it is much easier for anyone (e.g., waste pickers) to look for other recyclables. Developing country settings such as the Green Container composting program in Cajic&aacute, Colombia, and buyback centers in South Africa that are presented later in the manuscript are thought to be the places where the concept can be implemented with little effort. The environment, economy, and society are considered to be the three dimensions (or pillars) of sustainability. Interestingly, the organic waste buyback centers solution has positive implications on all three aspects of sustainability. Thus, it also supports the 2030 Agenda of the United Nations (UN), by making specific contributions to the Sustainable Development Goals (SDGs) such as zero hunger (SDG 2), affordable and clean energy (SDG 7), climate action (SDG 13), clean water and sanitation (SDG 6), and sustainable cities and communities (SDG 11).

Anaerobic digestion is a technology that has been used by humans for centuries. Anaerobic digestion is considered to be a useful tool that can generate renewable energy and significant research interest has arisen recently. The underlying theory of anaerobic digestion has been established for decades; however, a great deal of current research is directed towards the optimization of anaerobic digestion under diverse digestion conditions. This review provides a summary of the processes underlying anaerobic digestion, commonly-utilized measurements of anaerobic sludge, operating parameters of anaerobic digesters, and methods of acceleration and optimization used to improve process efficiency. Recent developments in addition to older research are considered to provide a general but comprehensive summary of accumulated knowledge in the theory of anaerobic digestion, as well as considerations in the efficient operation of digesters. We have determined that the numerous factors pertinent to the design and operation of batch-based anaerobic digesters must each be considered to ensure the maximum efficiency and cost-effectiveness of a digester provided its respective operating conditions.

Leaking underground storage tanks (USTs) containing gasoline represent a significant public health hazard. Virtually undetectable to the UST owner, gasoline leaks can contaminate groundwater supplies. In order to develop remediation plans one must know the extent of gasoline contamination. Centrifugal simulations showed that in silty and sandy soils gasoline moved due to the physical process of advection and was retained as a pool of free products above the water table. However, in clayey soils there was a limited leak with lateral spreading and without pooling of free products above the water table. Amount leaked depends on both the type of soil underneath the USTs and the amount of corrosion. The soil vapor extraction (SVE) technology seems to be an effective method to remove contaminants from above the water table in contaminated sites. In-situ air sparging (IAS) is a groundwater remediation technology for contamination below the water table, which involves the injection of air under pressure into a well installed into the saturated zone. However, current state of the art is not adequate to develop a design guide for site implementation. New information is being currently generated by both centrifugal tests as well as theoretical models to develop a design guide for IAS. The petroleum contaminated soils excavated from leaking UST sites can be used for construction of highway pavements, specifically as sub-base material or blended and used as hot or cold mix asphalt concrete. Cost analysis shows that 5% petroleum contaminated soils is included in hot or cold mix asphalt concrete can save US$5.00 production cost per ton of asphalt produced.