Search

In the paper, the novel topology of the resonant DC link three-level soft-switching inverter is proposed to reduce switching losses and improve the efficiency of three-level inverter at high switching frequency. Symmetrical auxiliary resonant circuits are set in the DC link of three-level hard-switching inverter. Moreover, the terminal voltage of the resonant capacitors between the DC buses periodically drops to zero via the resonance of auxiliary circuits. Furthermore, under such condition, the main switches of the three-level inverter would be operated, in order to achieve zero-voltage switching. Based on the equivalent circuits in different operating modes, the paper analyses the working process of the soft-switching inverter in detail. In addition, a 3 kW laboratory prototype of resonant DC link three-phase three-level soft-switching inverter is built. The experimental results show that the main switches and auxiliary switches of the inverter are operated under soft-switching conditions, and the efficiency is significantly improved compared with the three-level hard-switching inverter. Therefore, the proposed topology can effectively reduce switching losses and prove to be more practical in engineering. [ABSTRACT FROM AUTHOR]

An auxiliary switching device is usually set on the DC bus of the resonant DC link inverter, which restricts the efficiency of the inverter and is also one of the reasons for its not extensive application and promotion in the high-power field. To solve the problem, auxiliary circuits and DC bus of the resonant DC link soft-switching inverter designed in this paper are connected in parallel, and auxiliary switching devices and resonant elements are not connected in series on the DC bus, which help to improve the efficiency and reduce the power losses of the auxiliary resonant circuits. Based on the equivalent circuits in different operating modes, the paper analyzes the working process of the soft-switching inverter, soft-switching realization conditions and design rules. A 10 kW laboratory prototype is built, and through the comparison of the experimental results from it and the hard-switching inverter, it is shown that the efficiency improvement value of the designed inverter at full load is higher than that at light load. Therefore, the soft-switching inverter designed in this paper is conductive to reducing the power losses of the auxiliary resonant circuits and ensuring the efficient use of the electric energy. [ABSTRACT FROM AUTHOR]

Approximate computing is an emerging paradigm that can tolerate some loss of accuracy to improve the energy consumption and design complexity. Multiplication is one of the important computational components in various digital signal processing (DSP) applications. Improvement of multipliers, as the building blocks of an approximate computing systems, has received significant attention. Compressors are key elements in an approximate multiplier to have an optimal design with high performance. This paper proposes an approximate/exact 4–2 compressor and an exact 5–2 compressor in carbon nanotube field-effect transistors (CNTFET) technology for utilisation in an approximate multiplier. Four efficient designs for utilising the proposed compressors are introduced and analysed for a Wallace multiplier. All of the proposed circuits are analysed in 32 nm CNTFET Stanford technology and are simulated by HSPICE. In addition, as an image processing application of approximate multipliers, this paper compares the quality metrics of the image multiplication for the proposed designs and previously presented approximated multipliers. For example, the proposed schemes provide excellent results in structural similarity index up to 99%, and peak signal-to-noise ratio more than 45 dB. Also, it uses figure of metric (FOM) that includes the accuracy and quality metrics of the approximate multipliers. The simulation results demonstrate the efficiency of proposed designs. [ABSTRACT FROM AUTHOR]

This article is an interesting substrate material for environmental-friendly printable electronics. In this study, screen-printed RFID tags on paper substrate are examined. Their reliability was tested with low temperature, high temperature, slow temperature cycling, high temperature and high humidity and water dipping test. Environmental stresses affect the tag antenna impedance, losses and radiation characteristics due to their impact on the ink film and paper substrate. Low temperature, temperature cycling and high humidity did not have a radical effect on the measured parameters: threshold power, backscattered signal power or read range of the tags. However, the frequency response and the losses of the tags were slightly affected. Exposure to high temperature was found to even improve the tag performance due to the positive effect of high temperature on the ink film. The combined high humidity and high temperature had the most severe effect on the tag performance. The threshold power increased, backscattered power decreased and the read range was shortened. On the whole, the results showed that field use of these tags in high, low and changing temperature conditions and high humidity conditions is possible. Use of these tags in combined high-humidity and high-temperature conditions should be carefully considered. [ABSTRACT FROM AUTHOR]