Search

• The purpose of this article is to study a power flow algorithm with strong convergence, initial value adaptability, and efficiency. • This paper proposes a two-part alternating iterative framework based on dynamic equivalent admittance. • The proposed algorithm has universality for well-and ill-conditioned systems. • The proposed method combines the convergence characteristics of the Z-bus Gauss method and Newton's method, so it is easy to implement based on existing program codes. Power flow is an extensively used tool in various operations and planning of power systems. In this paper, we propose an efficient hybrid method for solving the power flow problems in ill-conditioned power systems. This method is implemented in a framework of two-part alternating iteration. In Part I of this method, PV bus voltages are regarded as constant and PQ bus voltages are updated by the Z-bus Gauss method. In Part II of this method, PQ bus loads are equivalent to dynamic admittances, and PV bus voltage angles are updated by Newton's method. The values of PQ bus voltage magnitudes and PV bus voltage angles are passed between Part I and Part II. The proposed method is validated in well- and ill-conditioned systems and compared with several well-known power flow methods. Results show that the proposed method is robust and efficient to address the issues related with large-scale ill-conditioned power systems and it is not significantly affected by the considered initial guess. [ABSTRACT FROM AUTHOR]

• A weak bus identification index is derived to identify the critical bus when power flow is unsolvable. • An extended system considering new bus type is proposed to improve power flow solvability. • A weak bus identification and bus type switching based framework is established to provide adjustment measures efficiently and automatically. • The method could provide a suitable solution automatically for unsolvable power flow in a variety of scenarios, retains stable convergence and has potential in large-scale power grids. The power flow solvability is greatly challenged by the growing pressure on power grid induced by the rapid development of economy. The approaches of restoring power flow solvability should be profoundly studied. Most of adopted power flow adjustment methods are based on manual interference which require extensive human resources with inefficiency. Thus, a power flow adjustment strategy based on a weak bus identification and a new bus type conversion is proposed. A weak bus identification index is defined and expressed when power flow has no solution. We propose a novel bus type and a concept of the power shortage to restore power flow solvability. The generator action set is determined by calculating the left eigenvector of the Jacobian matrix. At last, we establish a linear programming model to determine the generator output adjustment. Numerical results are obtained in 3 test systems and an actual system in China. Compared with other methods, the proposed method is verified to have a higher success rate of restoring power flow solvability and has robustness in various scenarios. [ABSTRACT FROM AUTHOR]

• Commutation failure prediction method based on energy accumulation characteristic. • The method can effectively predict commutation failure without phasor calculation. • Strongly immune to fault resistance and unaffected by the type of AC system fault. • The method can accurately locate the converter valve that failed to turn on. • Provide the control and protection system with reliable operation information. Concerning the difficulty in predicting commutation failure in HVDC transmission system, a commutation failure prediction method based on the energy accumulation characteristic of 12-pulse inverter is proposed. First, the operation characteristic of valve-side current in the commutation process is analyzed. And then, according to the characteristic of cross commutation between Y bridge and D bridge of 12-pulse inverter, the model of accumulated energy difference between commutation inductances is built. On this basis, considering the instantaneous values of real-time firing angle and valve-side current in the DC system, the commutation failure prediction criterion is constructed, which combined with the variation rate of valve-side current can predict commutation failure. Simulation tests in RTDS verify that, the proposed method can effectively predict commutation failure in HVDC system without phasor calculation. Besides, it is strongly immune to disturbance and fault resistance and unaffected by the type of AC system fault. [ABSTRACT FROM AUTHOR]

• The method considering changes of converter topologies during the DC restart failure is proposed. • Dynamic energy of AC filter has positive effect on DRDE in the stage of deionization. • Effect of AC filter on stability is negligible when 'restart at fault'/phase-shifted triggering. • DC terminal dynamic energy has negative effect on DRDE when bus voltage drops. • The proposed method can analyze the effect on the stability of the system of each component. HVDC restart failure can cause the DC power interruption, which may further result in the transient power angle of the rectifier-side AC system to go unstable. Concerning this problem, a transient stability analysis method considering dynamic changes of converter topologies during the whole process of the DC restart failure is proposed. First, dynamic energy models of the DC terminal and the AC filter in the whole process of the DC line restart failure are built, including the 'restart at fault', phase-shifted triggering and deionization stage. On this basis, according to the Lyapunov's second theorem, the variation rate of the aperiodic component of generator dynamic energy is defined as the dissipation rate of dynamic energy, which characterizes the accumulation or the consumption trend of total system energy. Thus the stability of the system is assessed according to the dissipation rate of dynamic energy. Then, effects of the dynamic energy of the DC terminal and the AC filter on the dissipation rate of dynamic energy in the whole process of DC restart failure are illustrated, and the cause of the transient instability of the rectifier-side AC system is revealed. Finally, hardware-in-the-loop tests in RT-LAB verify that, when the amplitude of the generator outlet bus voltage rises during the 'restart at fault' and phase-shifted triggering stages, the dynamic energy of the DC terminal has a positive effect on the dissipation rate of dynamic energy, induces the total system energy to keep accumulating, which is not conducive for the stability of the system. In the deionization stage, the dynamic energy of the AC filter has a positive effect on the dissipation rate of dynamic energy, which is not conducive for the stability of system. [ABSTRACT FROM AUTHOR]