Search

To solve the control problem of time-varying state-scale nonlinear systems whose initial state is not affected by settling time, fixed-time convergence algorithms are proposed for first-order systems and higher-order systems in this paper. First, a scalar model is used to illustrate how the time-varying feedback parameter can guarantee that the system achieves asymptotic stability while achieving finite-time convergence, and it is proved that the settling time obtained in this paper is only related to the prescribed boundary. This allows us to design the settling time with an appropriate parameter based on the prescribed boundary. To exhibit the effectiveness and extensibility of the proposed algorithm for first-order scalar systems, the results are subsequently extended to general higher-order systems based on the backstepping method. By introducing numerical simulation results, this paper verifies that the proposed algorithm will make the system achieve asymptotic stability and its output can converge to a given boundary, regardless of the system's initial states. [ABSTRACT FROM AUTHOR]

Motivated by the commonly encountered problem in which tracking is only required at selected intermediate points within the time interval, a general optimisation-based iterative learning control (ILC) algorithm is derived that ensures convergence of tracking errors to zero whilst simultaneously minimising a specified quadratic objective function of the input signals and chosen auxiliary (state) variables. In practice, the proposed solutions enable a repeated tracking task to be accurately completed whilst simultaneously reducing undesirable effects such as payload spillage, vibration tendencies and actuator wear. The theory is developed using the well-known norm optimal ILC (NOILC) framework, using general linear, functional operators between real Hilbert spaces. Solutions are derived using feedforward action, convergence is proved and robustness bounds are presented using both norm bounds and positivity conditions. Algorithms are specified for both continuous and discrete-time state-space representations, with the latter including application to multi-rate sampled systems. Experimental results using a robotic manipulator confirm the practical utility of the algorithms and the closeness with which observed results match theoretical predictions. [ABSTRACT FROM AUTHOR]

A novel iterative learning control (ILC) algorithm was developed and applied to an active flow control problem. The technique uses pulsed air jets to delay flow separation on a two-element high-lift wing. The ILC algorithm uses position-based pressure measurements to update the actuation. The method was experimentally tested on a wing model in a 0.9 m × 0.6 m low-speed wind tunnel at the University of Southampton. Compressed air and fast switching solenoid valves were used as actuators to excite the flow, and the pressure distribution around the chord of the wing was measured as a feedback control signal for the ILC controller. Experimental results showed that the actuation was able to delay the separation and increase the lift by approximately 10%–15%. By using the ILC algorithm, the controller was able to find the optimum control input and maintain the improvement despite sudden changes of the separation position. [ABSTRACT FROM PUBLISHER]

Boundary effects in iterative learning control (ILC) algorithms are considered in this article. ILC algorithms involve filtering of input and error signals over finite-time intervals, often using non-causal filters, and it is important that the boundary effects of the filtering operations are handled in an appropriate way. The topic is studied using both a proposed theoretical framework and simulations, and it is shown that the method for handling the boundary effects has impact on the stability and convergence properties of the ILC algorithm. [ABSTRACT FROM PUBLISHER]

Based on the observation that iterative learning control (ILC) can be based on the inverse plant but that the approach can be degraded by modelling errors, particularly at high frequencies, this article investigates the construction and properties of a multi-parameter parameter-optimal ILC algorithm that uses an approximate polynomial representation of the inverse with natural high-frequency attenuation. In its simplest form, the algorithm replicates the original work of Owens and Feng but, more generally, it is capable of producing significant improvements to the observed convergence rate. As the number of parameters increases, convergence rates approach that of the ideal plant inverse algorithm. Introducing compensation into the algorithm provides a formal link to previously published gradient and norm-optimal ILC algorithms and indicates that the polynomial approach can be regarded as approximations to those control laws. Simulation examples verify the theoretical performance predictions. [ABSTRACT FROM AUTHOR]

In this article a new approach to iterative learning control for the practically relevant case of deterministic discrete linear plants with uniform rank greater than unity is developed. The analysis is undertaken in a 2D systems setting that, by using a strong form of stability for linear repetitive processes, allows simultaneous consideration of both trial-to-trial error convergence and along the trial performance, resulting in design algorithms that can be computed using linear matrix inequalities (LMIs). Finally, the control laws are experimentally verified on a gantry robot that replicates a pick and place operation commonly found in a number of applications to which iterative learning control is applicable. [ABSTRACT FROM AUTHOR]

The method of iterative learning control, to a large extent, has been inspired by robotics research, focused on the control of stationary manipulators. In this article we deal with the inverse kinematics problem for mobile manipulators, and show that a very basic singularity robust Jacobian inverse can be derived in a natural way within the framework of iterative learning control. To achieve this objective we have exploited the endogenous configuration space approach. The introduced Jacobian inverse defines the singularity robust Jacobian inverse kinematics algorithm for mobile manipulators. A Kantorovich-type estimate of the region of guaranteed convergence of the algorithm is derived. For two example kinematics, this estimate has been computed efficiently. [ABSTRACT FROM AUTHOR]

This article considers iterative learning control (ILC) for linear systems with convex control input constraints. First, the constrained ILC problem is formulated in a novel successive projection framework. Then, based on this projection method, two algorithms are proposed to solve this constrained ILC problem. The results show that, when perfect tracking is possible, both algorithms can achieve perfect tracking. The two algorithms differ, however, in that one algorithm needs much less computation than the other. When perfect tracking is not possible, both algorithms can exhibit a form of practical convergence to a 'best approximation'. The effect of weighting matrices on the performance of the algorithms is also discussed and finally, numerical simulations are given to demonstrate the effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]

In iterative learning control (ILC), a lifted system representation is often used for design and analysis to determine the convergence rate of the learning algorithm. Computation of the convergence rate in the lifted setting requires construction of large N×N matrices, where N is the number of data points in an iteration. The convergence rate computation is O(N2) and is typically limited to short iteration lengths because of computational memory constraints. As an alternative approach, the implicitly restarted Arnoldi/Lanczos method (IRLM) can be used to calculate the ILC convergence rate with calculations of O(N). In this article, we show that the convergence rate calculation using IRLM can be performed using dynamic simulations rather than matrices, thereby eliminating the need for large matrix construction. In addition to faster computation, IRLM enables the calculation of the ILC convergence rate for long iteration lengths. To illustrate generality, this method is presented for multi-input multi-output, linear time-varying discrete-time systems. [ABSTRACT FROM AUTHOR]

This article proposes a novel technique for accelerating the convergence of the previously published norm-optimal iterative learning control (NOILC) methodology. The basis of the results is a formal proof of an observation made by D.H. Owens, namely that the NOILC algorithm is equivalent to a successive projection algorithm between linear varieties in a suitable product Hilbert space. This leads to two proposed accelerated algorithms together with well-defined convergence properties. The results show that the proposed accelerated algorithms are capable of ensuring monotonic error norm reductions and can outperform NOILC by more rapid reductions in error norm from iteration to iteration. In particular, examples indicate that the approach can improve the performance of NOILC for the problematic case of non-minimum phase systems. Realisation of the algorithms is discussed and numerical simulations are provided for comparative purposes and to demonstrate the numerical performance and effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]