Search

Summary: In this paper, a multiphase digital control called digital integration constant on‐time (DICOT) control is proposed, which applies the concept of signal accumulation, solves the drawbacks of ripple‐based digital COT control that the switching frequency and transient performance are affected by the A/D sample delay and sampling noise. Besides, the multiphase interleaving approach of the proposed DICOT control is well‐suitable for digital control and no higher calculation frequency is required compared to single‐phase. In the aspect of the current balance, almost all existing researches work on analog COT current balance scheme and few works are investigating the resolution improvement of digital COT current balance. In this paper, the current balance model of multiphase COT control is derived and can be applied in the Buck system with an arbitrary number of phases, the delay‐line‐based high‐resolution COT current balance scheme is proposed to enhance the control resolution. Finally, the two‐phase DICOT control is tested on the multiphase Buck system, the transient performance is tested of 100 A load step with the slew rate of 1000 A/μs, and the voltage undershoot and overshoot are 20 and 36 mV, respectively. The current balance is tested and the errors are 0.01% and 0.11% at the light and heavy loads, respectively. [ABSTRACT FROM AUTHOR]

Summary: Multistring arrays of LED in parallel connection are widely applied in lighting fields. Active control and passive methods are utilized to guarantee equal current sharing between different strings with a common voltage source. Compared with active control, the passive methods that adopt purely passive components without real power dissipation are good candidates. Currently, an inductive power transfer (IPT) converter providing a constant voltage (CV) line, followed by some immittance networks that convert the CV line to constant current (CC) outputs, is commonly used to drive multiple LED strings. However, in such a two‐conversion‐stage scheme, the component count is as many as 3×N, where N is the number of LED strings, which deviates from compact, low‐cost, and simple design ideas. To address it, this paper aims to develop a single‐immittance‐network‐based IPT system to drive multistring LEDs with the current balance. The proposed IPT system can directly provide a CV to CC conversion to drive multistring LEDs with the benefits of simplifying the circuit design, size, and cost. The proposed IPT system also features programmable luminous power, zero‐phase‐angle (ZPA) input, IPT technology, and load‐independent‐current (LIC) output. Detailed analysis, implementation, and experiment are presented in this paper. [ABSTRACT FROM AUTHOR]