Search

• PNS is a sustainable filler to develop cost-effective PLA biocomposites. • PNS enhanced PLA thermal stability, viscoelastic response, and crystallinity. • High filler loading did not cause significant decay in mechanical properties. • Ball milling of PNS further improved PLA thermal properties and melt fluidity. • Thermal annealing enhanced HDT, stiffness and strength of biocomposites. Biodegradable polymer composites reinforced with agri-food lignocellulosic biowaste represent cost-effective and sustainable materials potentially able to replace traditional composites for structural, household, and packaging applications. Herein, the preparation of polylactic acid (PLA)/pecan (Carya illinoinensis) nutshell (PNS) biocomposites at high filler loading (50 wt%) is reported, alongside the effect of two environmentally friendly physical treatments, namely ball-milling of the filler and thermal annealing on biocomposites. PNS enhanced the thermal stability, the viscoelastic response, and the crystallinity of the polymer. Furthermore, filler ball-milling also increased the melt fluidity of the biocomposites, potentially improving melt processing. Finally, the presence of PNS remarkably enhanced the effect of thermal annealing in the compounds. In particular, heat deflection temperature of the biocomposites dramatically increased, up to 60 °C with respect to the non-annealed samples. Overall, these results emphasize the potential of combining natural fillers and environmentally benign physical treatments to tailor the properties of PLA biocomposites, especially for those applications which require a stiff and lightweight material with low deformability. [ABSTRACT FROM AUTHOR]

Having poor interfacial compatibility between biochar microsphere (BM) and polylactic acid (PLA) should be responsible for the unbalance of composite film strength and toughness. Elucidating the effect of polydopamine (PDA) on BM and BM/PLA composite films is the ultimate goal of this study based on the mussel bionic principle. It was found that the strong adhesion of PDA on the BM surface was achieved, which improved the surface roughness and thermal stability. Also, PDA modification can facilitate crystallization, increase thermal properties, improve interfacial compatibility, and enhance the tensile properties of BM/PLA composite films. Silane-based PDA modified BM/PLA composite film exhibited the best tensile strength, tensile modulus, and elongation at break with 77.95 MPa, 1.87 GPa, and 7.30%. These noteworthy findings, achieving a simultaneous improvement in PLA strength and toughness, hold promising implications for its sustainability. [Display omitted] [ABSTRACT FROM AUTHOR]

Applications for polylactic acid (PLA) are significantly impacted by its poor mechanical properties and lack of thermal stability. The goal of this work is to bridge the gap of poor compatibility among the components and enhance their interface interlocking capability to improve the toughness and thermal stability. Ultrafine bamboo charcoal (UFBC) was treated through deep eutectic solvent (DES) method to deposit sodium lignosulfonate (LS) on its surface. LS was used with PLA as a bio-coupling agent to create an eco-friendly PLA composite film with a wide range of characteristics. Benefiting from the penetration of PLA to the internal pores in UFBC, the resultant L-UFBC/PLA film has a good mechanical interlocking structure. Ls can increase the compatibility and strengthen the interface interlocking capability through DES method, which greatly improves the mechanical properties of the system. In comparison to pure PLA one, the elongation at break was 136.24 % greater, and the crystallinity (Xc) increased from 1.09 % to 3.33 %. Furthermore, the thermal stability of the system was also improved, and the residual at 600 °C rose by 4.83 %. These characteristics offer the prepared L-UFBC/PLA film a wide range of potential applications in the packaging, medical, agricultural, and other sectors. [ABSTRACT FROM AUTHOR]

Cardanol (CD) is used as a reactive compatibilizer, and blended with polylactic acid (PLA) and polypropylene carbonate (PPC) resin (70/30(w/w)) to obtain a series of PLA/PPC/CD blends. The systematic study was conducted on the thermal properties, optical properties, rheological properties, mechanical properties, and microscopic morphology of the blend, by varying amounts of CD added to the blends. A detailed explanation and comprehensive analysis of the reaction mechanism between CD and PLA/PPC have been made. The study found that CD acts as a "bridge" between the PLA and PPC, forming the structure of a block copolymer (PLA-b-CD-b-PPC), and the copolymer can greatly improve the compatibility of PLA and PPC. When the amount of CD reaches 8 wt%, only one T g is observed in the blend, simultaneously, PLA/PPC has already transitioned from a partially compatible system to a completely compatible system. At the same time, the addition of CD does not have any negative impact on the thermal stability of the PLA/PPC blend under processing temperature conditions, and the thermal stability of the PLA/PPC/CD blends can even be improved under extreme conditions. In addition, the addition of CD allows the PLA/PPC/CD blends to maintain a high light transmittance while reducing the opacity of the blend (the light transmittance remains above 92 %, and the opacity is reduced from 37 % to about 24 %), demonstrating excellent optical properties. Moreover, the elongation at break and impact strength of the PLA/PPC/CD blend both show a trend of first increasing and then decreasing with the increase of CD amount. When the CD amount varies within the range of 6– 8 wt%, the blends undergoes a brittle-ductile transition, and its toughness is greatly improved while the rigidity can also meet practical needs. When the amount of CD in the system increases to 12 wt%, the toughness of the blend reaches its peak, and its elongation at break and impact strength reach 513.24 % and 9211.5 J/m2 respectively (increased to 2442.84 % and 270.73 % of the PLA/PPC blend). Concurrently, the fracture surface of the blend exhibits large-scale plastic flow in the direction of the applied force, with marked shear yield phenomena, showing obvious characteristics of tough fracture. [Display omitted] [ABSTRACT FROM AUTHOR]

Soil burial degradation was confirmed to be an efficient waste disposal method for the biodegradable materials with short service life, such as starch/poly (lactic acid) (PLA) composite. The biodegradation behavior about chemical and thermal properties of starch/PLA composite was analyzed by using X-ray photoelectron spectroscopy (XPS), infrared microscopy (IRM), differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). XPS and IRM results indicated that the biodegradation of PLA occurred at the ester groups in PLA chains. XPS demonstrated the cleavage of C O linkages between glucose rings in starch. DSC and TGA results showed that the starch/PLA composite degraded faster than the pure PLA. During the soil burial degradation, the glass transition temperature of starch/PLA composite exhibited an obviously decrease while it had a slight variation for PLA. The thermal stability of starch/PLA composite shifted towards to that of PLA when they were subjected to soil burial for the same time. It is established that the starch can accelerate the degradation of PLA-based materials, which will enlarge the markets of biodegradable PLA materials used for short service life products. [ABSTRACT FROM AUTHOR]