Search

Two sodium alginate-based Pb2+-imprinted thermosensitive hydrogels (SPIT (without ɛ-PL) and SPPIT (with ɛ-PL)) were synthesized, with sodium alginate and ɛ-polylysine (ɛ-PL) as the matrix, N-isopropylacrylamide as the monomer. Characterization with differential scanning calorimeter, Fourier transform infrared spectroscopy, thermogravimetric analyzer, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy confirmed the aimed structure of the hydrogels. The adsorption capacity of SPIT and SPPIT for Pb2+ was 98.64 mg/g and 153.49 mg/g, respectively. Washing the Pb2+-loaded adsorbent with 10 °C deionized water, SPIT and SPPIT achieved a desorption efficiency of 94.59 % and 97.51 %, respectively. After 10 cycles of adsorption-desorption process, the adsorption capacity and desorption efficiency remained at about 80–88 % of the original ones, expressing excellent reusability. In a mixture containing eight metal ions (Pb2+, Cu2+, Mg2+, Ca2+, Cd2+, Na+, K+, Fe3+), the adsorption capacity of SPIT to Pb2+ was 92.49 mg/g, and that of SPPIT was 102.49 mg/g, much higher than that to the other ions (1.50–11.38 mg/g on SPIT, 9.48–27.45 mg/g on SPPIT), showing excellent adsorption selectivity. The introduction of ɛ-PL enhanced the adsorption capacity, antibacterial ability and stability of the hydrogel, ensuring better application potential in real wastewater. • Two Pb2+-imprinted adsorbents were prepared with sodium alginate as the matrix. • The differential scanning calorimeter test confirmed the reversible thermosensitivity of the adsorbents. • Washing with cold water (5-10 °C) could regenerate the Pb2+-loaded adsorbents. • After 10 cycles of reuse, 80–88 % of the adsorption capacity was remained. • The adsorptive selectivity coefficient of adsorbent was up to 33.99. [ABSTRACT FROM AUTHOR]

Polysaccharide-based hydrogel adsorbents become popular because of their high adsorption capacity and fast adsorption rate, but their low removal rate and poor pH resistance have always been fatal shortcomings. Herein, a feasible strategy was proposed to strengthen the ability of hydrogel adsorbent to remove organic pollutants (i.e., dye) by incorporating natural rectorite (REC) into chitosan- g -poly (2-acrylamido-2-methyl-propane-sulfonic-acid) hydrogel network to form a rectorite-in-polymer network structure. The introduction of less dosage of REC (1.2 wt%) into the hydrogel facilitates to improve its adsorption capacities toward methylene blue (MB) in deionized water, tap water, seawater, Yangtze River water, and Yellow River water (1083.39–1303.49 mg/g); while incorporating higher content of REC (15.8 wt% REC) helps to improve the removal rate (99.6% for MB in real waters), which are greatly superior to commercial activated carbons. The adsorbent keeps high adsorption efficiency in a broad pH range (2–11), and can be reused for >4 times. [Display omitted] • Synthesized chitosan-based hydrogel has a rectorite-in-polymer composite network. • The hydrogel shows high adsorption capacity (1303.49 mg/g) and removal rate (99.6 %). • Removal efficiency keeps high in real waters (Yangtze River, Yellow River, seawater). • The hydrogel's adsorption capacity far exceeds that of commercial activated carbon. • This method is universal to enhance the removal efficiency of hydrogel adsorbent. [ABSTRACT FROM AUTHOR]