Search

• PNS is a sustainable filler to develop cost-effective PLA biocomposites. • PNS enhanced PLA thermal stability, viscoelastic response, and crystallinity. • High filler loading did not cause significant decay in mechanical properties. • Ball milling of PNS further improved PLA thermal properties and melt fluidity. • Thermal annealing enhanced HDT, stiffness and strength of biocomposites. Biodegradable polymer composites reinforced with agri-food lignocellulosic biowaste represent cost-effective and sustainable materials potentially able to replace traditional composites for structural, household, and packaging applications. Herein, the preparation of polylactic acid (PLA)/pecan (Carya illinoinensis) nutshell (PNS) biocomposites at high filler loading (50 wt%) is reported, alongside the effect of two environmentally friendly physical treatments, namely ball-milling of the filler and thermal annealing on biocomposites. PNS enhanced the thermal stability, the viscoelastic response, and the crystallinity of the polymer. Furthermore, filler ball-milling also increased the melt fluidity of the biocomposites, potentially improving melt processing. Finally, the presence of PNS remarkably enhanced the effect of thermal annealing in the compounds. In particular, heat deflection temperature of the biocomposites dramatically increased, up to 60 °C with respect to the non-annealed samples. Overall, these results emphasize the potential of combining natural fillers and environmentally benign physical treatments to tailor the properties of PLA biocomposites, especially for those applications which require a stiff and lightweight material with low deformability. [ABSTRACT FROM AUTHOR]

Biocomposites are materials that are easy to manufacture and environmentally friendly. Sugar palm fibre (SPF) is considered to be an emerging reinforcement candidate that could provide improved mechanical stiffness and strength to the biocomposites. Numerous studies have been recently conducted on sugar palm biocomposites to evaluate their physical, mechanical and thermal properties in various conditions. Sugar palm biocomposites are currently limited to the applications of traditional household products despite their good thermal stability as a prospective substitute candidate for synthetic fibres. Thus, thermal analysis methods such as TGA and DTG are functioned to determine the thermal properties of single fibre sugar palm composites (SPCs) in thermoset and thermoplastic matrix as well as hybrid SPCs. The biocomposites showed a remarkable change considering thermal stability by varying the individual fibre compositions and surface treatments and adding fillers and coupling agents. However, literature that summarises the thermal properties of sugar palm biocomposites is unavailable. Particularly, this comprehensive review paper aims to guide all composite engineers, designers, manufacturers and users on the selection of suitable biopolymers for sugar palm biocomposites for thermal applications, such as heat shields and engine components. [ABSTRACT FROM AUTHOR]

The present study investigated the effect of alkali treatment on the enhancement of Physico-chemical, tensile, thermal and surface properties of Symphirema involucratum stem fiber (SISF). The investigation of chemical constituents of optimally alkalized SISF revealed that ideal increment of cellulose content (68.69 wt%) and desired modification of other chemical components was accomplished through 60 min immersion period. An increase in the crystallinity index to 33.33% and small crystallite size to 3.21 nm was noted by X-ray diffraction analysis. Moreover, the treated fiber was found suitable for light-weight applications since physical analysis acknowledges that the density of the fiber augmented to 1424 kg/m3after surface treatment that reduces total weight percentage. The enhancements in tensile strength (471.2 ± 19.8 MPa), tensile modulus (5.82 ± 0.77 GPa) and thermal stability (371 °C) were noted that ensures the treated fiber has good mechanical and thermal properties required for composite preparation. These findings validated that the optimally surface-modified SISF is a suitable material for lightweight composite structures, for the time being. [ABSTRACT FROM AUTHOR]