Search

This work involves preparing zinc manganite nanoparticles (ZnMn 2 O 4 NPs) using the Sol-gel method. Polymer nanocomposites of polyvinyl alcohol (PVA)/Sodium alginate (NaAlg)- ZnMn 2 O 4 NPs were created using the solution casting technique. The polymer nanocomposites films were made with varying weight percentages of ZnMn 2 O 4 nanoparticles. With the addition of nanofiller, the reduced direct and indirect energy band gap values and increased Urbach energy values were discovered in the UV–Vis data. XRD data showed a reduction in crystallinity degree with dopant. ZnMn 2 O 4 NPs had a strong interaction with PVA/NaAlg blend, as confirmed by FTIR. The addition of ZnMn 2 O 4 NPs led to improved thermal stability of the polymer nanocomposites films. Additionally, the nanocomposites films' mechanical characteristics were examined. The loading of ZnMn 2 O 4 nanoparticles has been associated with an increasing trend in the mechanical properties of the nanocomposites, including its toughness, Young's modulus, Tensile strength (Ts), and elongation. The antibacterial activity of the nanocomposites against fungus and bacteria was studied. Additionally, PVA/NaAlg-ZnMn 2 O 4 nanocomposites films had good antibacterial characteristics against environmental microorganisms such as Gram-positive (G+) S. aureus and Gram-negative(G−) E. coli bacteria as well as fungi C. albicans and A. niger. It was observed that the biodegradability of the nanocomposite films was lower compared to the pure PVA/NaAlg film. Compared to pure film, the water solubility was decreased upon the addition of ZnMn 2 O 4 NPs. After ZnMn 2 O 4 was added to the pure blend, the WVTR decreased. The produced polymer nanocomposites films appear to be a promising material for food packing, according to these results. [ABSTRACT FROM AUTHOR]

Carboxymethyl starch (CST) was introduced to improve gelatin films and its practical application as edible high-performance films for food packaging and cooking was also investigated. The gelatin films modified by carboxymethyl starch exhibited the transparent appearance, tensile strength, barrier properties (oxygen, water vapor and UV light), and thermal performance (TGA, thermal shrinkage and heat-sealing strength). Resulting from the effect of electrostatic interaction modes on the properties of films, electrostatic repulsion could surpass electrostatic attraction in improving the tensile strength, oxygen barrier property and thermal stability of the films probably due to extensive physical entanglement without aggregation. Analysis of FTIR, zeta potential, interfacial dilatational rheology, shear rheological properties, XRD, Raman, SEM and AFM suggested that hydrogen bonding and electrostatic repulsion contributed to the excellent performance. The packaged food could also be cooked with the prepared film for porridge; and the film slightly influenced the shear rheological properties of porridge and imposed little effect on the odors (Electronic-Nose) of porridge. Hence, the gelatin films modified by carboxymethyl starch could potentially work as the edible inner packaging or the edible quantitative packaging for food, offer convenience for consumers, reduce the packaging waste and avoid an extra burden on environment. • CST improved mechanical and barrier properties (O 2 , moisture and UV light) of films. • CST enhanced the thermal stability, thermal shrinkage and sealing strength of films. • Hydrogen bonds and electrostatic repulsion improved compact matrix and performance. • Excessive CST granules caused the weak interactions and the property deterioration. • The packaged food could cook porridge and slightly affect the rheology and odors. [ABSTRACT FROM AUTHOR]

To overcome the limitations of chitosan (CS) and konjac glucomannan (KGM), the bilayer films of CS and KGM were prepared by layer-by-layer (LBL) casting method, and the effects of different mass ratios (i.e., C5: K0, C4:K1, C3:K2, C1:K1, C2:K3, C1:K4, and C0:K5) on the microstructures and physicochemical properties of bilayer films were examined to evaluate their applicability in food packaging. The results revealed that the bilayer films had uniform microstructures. When compared with pure films, the bilayer films displayed lower swelling degrees and water vapor permeability. However, the tensile tests revealed a reduction in the mechanical properties of the bilayer films, which was nonetheless superior to that of the pure KGM film. In addition, the intermolecular interactions between the CS and KGM layers were observed through FTIR and XRD analyses. Finally, TGA and DSC analyses demonstrated a decrease in the thermal stability of the bilayer films. Our cumulative results verified that CS-KGM bilayer films may be a promising material for use in food packaging and further properties of the bilayer films can be supplemented in the future through layer-by-layer modification and the addition of active ingredients. • There was good material compatibility between CS and KGM, which formed a uniform and dense bilayer structure. • Compared with pure films, the bilayer films displayed lower swelling degrees and water vapor permeability. • Complexed with CS significantly improves the mechanical properties and reduces the water solubility of pure KGM film. • The optimum mass ratio of CS and KGM in the bilayer films is suggested to be 1:1. [ABSTRACT FROM AUTHOR]