Search

The escalating global population has led to a surge in waste textiles, posing a significant challenge in landfill management worldwide. In this work, ionic liquid 1-butyl-3-methylimidazole acetate ([Bmim]OAc) and DMF (N, n -dimethylformamide) were used as solvents to dissolve waste denim fabric, then vanadium dioxide (VO 2) nanoparticles were introduced into the spinning solution, and cellulose fibers were regenerated by dry-wet spinning process, to promote the recycling of waste cotton fabric. Finally, regenerated cellulose fibers with high added value were prepared by dry-wet spinning. Through this innovative strategy, on the one hand, because VO 2 can form a large number of hydrogen bonds between the regenerated cellulose molecules, and realize the cross-networking structure of the molecular chains inside the fiber, the mechanical properties of the regenerated cellulose fibers are enhanced. On the other hand, due to the thermal phase transformation characteristics of VO 2 , it also endows the regenerated cellulose fiber unique intelligent temperature control function. Compared with the pristine regenerated fiber, the tensile stress of the regenerated fiber after adding VO 2 nanoparticles (F-VO 2) increased by 25.6 %, reaching 158.68 MPa. In addition, the F-VO 2 fibric provides excellent intelligent temperature control, reducing temperatures by up to 6.7 °C. [ABSTRACT FROM AUTHOR]

The escalating global population has led to a surge in waste textiles, posing a significant challenge in landfill management worldwide. In this work, ionic liquid 1-butyl-3-methylimidazole acetate ([Bmim]OAc) and DMF (N, n -dimethylformamide) were used as solvents to dissolve waste denim fabric, then vanadium dioxide (VO 2) nanoparticles were introduced into the spinning solution, and cellulose fibers were regenerated by dry-wet spinning process, to promote the recycling of waste cotton fabric. Finally, regenerated cellulose fibers with high added value were prepared by dry-wet spinning. Through this innovative strategy, on the one hand, because VO 2 can form a large number of hydrogen bonds between the regenerated cellulose molecules, and realize the cross-networking structure of the molecular chains inside the fiber, the mechanical properties of the regenerated cellulose fibers are enhanced. On the other hand, due to the thermal phase transformation characteristics of VO 2 , it also endows the regenerated cellulose fiber unique intelligent temperature control function. Compared with the pristine regenerated fiber, the tensile stress of the regenerated fiber after adding VO 2 nanoparticles (F-VO 2) increased by 25.6 %, reaching 158.68 MPa. In addition, the F-VO 2 fibric provides excellent intelligent temperature control, reducing temperatures by up to 6.7 °C. [ABSTRACT FROM AUTHOR]

Micro-to-nano transformation can make a material unique. This research uses jute microfiber to extract Holo and Alpha forms of cellulose, which are later attempted to electrospun into superfine nanofibers (NFs). Initial investigation of morphological, physicochemical, crystallographic, and thermal properties confirmed successful synthesis of Holo and Alpha-cellulose (H/A-cellulose). Afterwards, the electrospinnable concentration of H/A-cellulose was optimized and their bead-free ultrafine NFs in the range of 109–145 nm were fabricated. FTIR analysis confirmed the source composition in Holo and Alpha CNF with the partial formation of trifluoroacetyl esters. Alpha CNF exhibited better structural integrity despite the crystallinity and thermal stability deteriorated in both Holo and Alpha CNF. Both Holo and Alpha CNF exhibited adequate mechanical performance and liquid uptake properties. Alpha CNF showed better morphological stability in organic solvents and slower biodegradation than Holo CNF. Subsequent investigation revealed that both Holo and Alpha CNF didn't exhibit cytotoxic effects on COS-7 cells and above 90 % of cells were viable in contact with both CNF. Significant proliferation and attachment of COS-7 cells were noticed within 7 days of incubation with the prepared CNF. Our findings revealed that jute-extracted cellulose can be a viable and potential source for constructing cellulose-based advanced nano-biomaterials. Graphical representation of the scaffold fabrication. [Display omitted] • Extraction of Holo and Alpha-cellulose from jute fiber • Fabrication of Holo and Alpha CNF via electrospinning • Alpha CNF was more structurally stable than Holo CNF. • Holo CNF and Alpha CNF have adequate surface-wetting and liquid uptake properties. • Both Holo CNF and Alpha CNF were non-toxic against COS-7 cells and favored excellent cell proliferation and attachment. [ABSTRACT FROM AUTHOR]

The development of high-strength and intrinsic flame-retardant natural fiber-reinforced green composite (NFRGC) is a landmark for high-performance structural applications. This paper reports a biobased, high-performance, flame-retardant composite material based on diverse bio-resources. Tough and strong cellulose long filaments (CLFs) are combined with vanillin-derived epoxy (VDE) resin to achieve high strength and flame-retardant NFRGC. The green composite was fabricated using a simple hand lay-up and compression molding technique. The green composite showed a noteworthy increment of 100.9 % flexural strength and 346 % flexural modulus compared to the neat VDE resin. Interestingly, despite the highly flammable nature of CLF, the green composite passes a V-0 rating under the UL-94 test, indicating excellent flame-retardant characteristics. Additionally, the green composite demonstrated outstanding hydrophobicity with a water contact angle of 104.2° and good chemical stability in various acidic and organic solvents. The green composite's excellent mechanical and physical properties show its potential for high-strength and flame-retardant structural applications. [Display omitted] [ABSTRACT FROM AUTHOR]

The development of high-strength and intrinsic flame-retardant natural fiber-reinforced green composite (NFRGC) is a landmark for high-performance structural applications. This paper reports a biobased, high-performance, flame-retardant composite material based on diverse bio-resources. Tough and strong cellulose long filaments (CLFs) are combined with vanillin-derived epoxy (VDE) resin to achieve high strength and flame-retardant NFRGC. The green composite was fabricated using a simple hand lay-up and compression molding technique. The green composite showed a noteworthy increment of 100.9 % flexural strength and 346 % flexural modulus compared to the neat VDE resin. Interestingly, despite the highly flammable nature of CLF, the green composite passes a V-0 rating under the UL-94 test, indicating excellent flame-retardant characteristics. Additionally, the green composite demonstrated outstanding hydrophobicity with a water contact angle of 104.2° and good chemical stability in various acidic and organic solvents. The green composite's excellent mechanical and physical properties show its potential for high-strength and flame-retardant structural applications. [Display omitted] [ABSTRACT FROM AUTHOR]