Search

Hydroxypropyl methylcellulose (HPMC)/sodium citrate (SC)/lipid tea polyphenol (LTP) photophobic films with different pore sizes from micron scale to nanometer scale were prepared by regulating the SC content (1–7%). The microstructures, physical and sustained antioxidant properties of these films were studied by using wide angel X-ray diffraction, small angle X-ray scattering (SAXS), scanning electron microscope, whiteness meter, ultraviolet spectrophotometer, texture analyzer and peroxide value test. Composite films with higher SC content showed larger pore size and whiteness. With the increasing SC content, crystallinity first increased then decreased. The addition of SC decreased the D s (surface fractal dimension) value, smoothness of the cross-section structure, tensile strength, elongation and modulus of composite films. HPMC/SC/LTP microporous films possessed control-release property in oil system, reflected by the lowest peroxide value of peanut oil enclosed in film with 3% SC during three weeks, meaning this film showed the best sustained antioxidant property. [ABSTRACT FROM AUTHOR]

Quinoa starch was developed as a new kind of Pickering emulsifier by enzymatic modification. The morphological structure, crystalline structure, lamellar structure, fractal structure, particle size distribution, contact angle, emulsion index (EI), and emulsion micromorphology were studied to explore the relationship between structure characteristics, hydrophilic property, and emulsifying properties of enzymatically modified (EM) quinoa starches. With the increasing enzymatic hydrolysis time in the test range of 0–9 h, particle size of EM quinoa starch decreased, and the broken starch and contact angle of EM quinoa starch increased; the EI value of emulsions with EM quinoa starch increased, and the oil droplet size of emulsions with EM quinoa starch decreased. It suggested that both the smallest particle size and the closest extent of the contact angle to 90° derived the best emulsifying property of EM-9. The EM quinoa starch had higher emulsifying capacity at higher oil volume fraction (Φ) (50%) than at lower Φ (20%), proving that the EM starch has potential to be used as Pickering emulsifiers in higher oil products, such as salad dressing. [ABSTRACT FROM AUTHOR]

Different ionic liquid (IL)s were added to hydroxypropyl methylcellulose /monosodium phosphate (HPMC/MSP) photophobic film to improve its ductility, and their effects on its multi-scale structures and physical properties were studied. After adding these ILs, smoothness of the fractal structure, tensile strength, modulus of the film did not change obviously, while the crystallinity, the number of holes, and elongation increased, the hole size and T g decreased. Compared to films with other ILs, the film with 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF 4) showed the largest elongation and crystallinity, the smallest hole size, the least holes, and highest whiteness. The film with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) showed the largest water content and the lowest T g. The increased elongation proved that all these ILs could improve the ductility of the film, among which, [EMIM]BF 4 had the strongest plasticizing effect. [ABSTRACT FROM AUTHOR]

Photophobic (white) films were prepared by mixing hydroxypropyl methylcellulose (HPMC) of different molecular weights with sodium citrate (SC). Wide angle X-ray diffractometry, small angle X-ray scattering, scanning electron microscopy, dynamic mechanical analysis, whiteness determination and texture analysis were used to investigate the effect of HPMC molecular weight on the aggregation structures and properties of HPMC film. The crystalline integrity decreased with the increased molecular weight of HPMC for these HPMC/SC films. Similar crystallinity was observed for 6HPMC/SC and 15HPMC/SC, which was larger than that of 50HPMC/SC. All the three HPMC/SC film showed surface fractal structure with similar D s. With the increasing molecular weight of HPMC, the HPMC/SC film showed honeycomb structures with smaller holes and more compact porous structure, T g first increased and then decreased a little, the tensile strength and elongation increased with the increasing HPMC molecular weight. 50HPMC/SC films with the smallest pores showed the largest whiteness. A new T g ' peak was observed for HPMC/SC film. • Effect of HPMC molar mass on structural properties of HPMC/SC films was studied. • The HPMC/SC film with higher HPMC molar mass showed smaller and more compact holes. • The tensile strength and elongation increased with the increasing molar mass of HPMC. • 50 HPMC/SC films with the smallest pores showed the largest whiteness. • New T g ′ peak was observed for HPMC/SC film, with the most obvious for 6 HPMC/SC film. [ABSTRACT FROM AUTHOR]

Abstract Monosodium phosphate (MP), sodium citrate (SC), sodium lactate (SL) and magnesium citrate (MC) can be blended with hydroxypropyl methylcellulose (HPMC) to make photophobic (white) films at lower drying temperatures. Small angle X-ray scattering (SAXS), wide angle X-ray diffraction (XRD), scanning electron microscopy (SEM), whiteness determination, dynamic mechanical analysis (DMA) and texture analysis were adopted to study the variation of microstructures and properties. These four kinds of HPMC/salt films showed decreased crystallinity and increased compactness and smoothness of the self-similar structures in larger scale ranges. HPMC/MP, HPMC/SC and HPMC/SL film showed coarser and porous morphologies, lower mechanical parameters and higher whiteness than pure HPMC film. HPMC/MC film showed smoother morphologies, higher tensile strength, elongation and whiteness than pure HPMC film. Porous structures and more compact self-similar structures might contribute to the photophobic property of these films, and relatively smooth morphology might dominate the increasing mechanical parameters of HPMC/MC film. [ABSTRACT FROM AUTHOR]

Se-polysaccharide (Se-GFP-22) from Se-enriched Grifola frondosa has double and cooperative activities of polysaccharide and Se. To delineate the underlying mechanism and signaling cascade involved in immune-stimulatory property of Se-GFP-22, the production of cellular mediators and key proteins in signaling pathway was examined. Results showed that Se-GFP-22 exhibited no cytotoxic and had a high capacity to promote macrophage phagocytosis, up-regulate interleukin-2 (IL-2), tumor necrosis factor-α (TNF-α), interferon-γ (IFN-γ), and nitric oxide (NO) productions, as well as the relative messenger RNA (mRNA) expressions. In Se-GFP-22-induced macrophages, intracellular superoxide dismutase (SOD) activity was significantly increased to protect cells from oxidative injury. However, Se-GFP-22 induced macrophage activation was suppressed when the toll-like receptor 4 (TLR4) signaling pathway was blocked by a specific TLR4 inhibitor. According to the western blot analysis and the use of specific inhibitors against the mitogen-activated protein kinases (MAPK) signaling pathway, we speculated that Se-GFP-22 activated RAW264.7 macrophages through the TLR4-mediated MAPK signaling pathway. This study provides a molecular basis for the potential of Se-GFP-22 as a novel immune-stimulatory agent. • The immunomodulatory effect and the underlying mechanism of Se-GFP-22 were studied. • Se-GFP-22 promoted the secretion of NO, IL-2, TNF-α and IFN-γ in RAW264.7. • Se-GFP-22 upregulated mRNA expression of iNOS, IL-2, TNF-α and IFN-γ. • Se-GFP-22 activated the immune-stimulatory effects via TLR4/MyD88/MAPK pathway. [ABSTRACT FROM AUTHOR]