Search

A large amount of metallurgical solid waste accumulation poses a serious threat to the environment. Study on synergistic reinforcement of synthetic process of metallurgical solid waste‐based ceramics with fly ash is of great significance in reducing environmental pollution and resource utilization. A metallurgical solid waste‐based ceramic used as building ceramic was developed with the erosion part of used MgO–C bricks and fly ash as main raw materials, and the amount of solid waste added to the prepared ceramics was at least 60 wt% and up to 90 wt%. The effects of fly ash content and sintering temperature on the crystalline phase transitions, morphologies, and the main physical and mechanical properties of ceramics were investigated by X‐ray diffraction, scanning electron microscopy, and mechanical testing. The results show that the obtained ceramics presented maximum bending strength and minimum water absorption, 80.14 MPa and 5.04%, respectively, when the raw material proportions were the erosion part of used refractories accounted for 60 wt%, fly ash 20 wt%, pyrophyllite 10 wt%, and quartz sands 10 wt%, and the process parameters were the sintering temperature 1150°C, sintering time 120 min, and molding pressure 15 MPa. [ABSTRACT FROM AUTHOR]

Lanthanum hexaaluminate is a promising candidate to establish yttria partially stabilized zirconia as a thermal barrier coating material for super alloy due to their remarkable stability and thermophysical performance. In order to understand the relationship between the structure and properties and gain new low thermal conducting materials, the LnMgAl11O19 (LnMA, Ln: La, Pr, Nd, Sm, Eu, Gd) materials were synthesized firstly and further used to produce the LnMA ceramics. With the increasing relative atomic mass of the replaced Ln3+ ions from La to Gd, the lattice parameters and grain sizes of the LnMA platelets decrease, while the mechanical properties increase, and the thermal physic properties decrease. The GdMgAl11O19 ceramics obtain the lowest thermal conductivity with the value of 1.91‐1.78 W/m K in the range from room temperature to 800°C, which could be considered as a promising candidate for application in thermal barrier coating materials. These results could further provide reference for developing novel materials lower thermal conductivity. [ABSTRACT FROM AUTHOR]