Search

The spread of 3D printing in many different fields has become eminent. This paper aims to improve the mechanical properties of parts printed by fused deposition modeling technique. Acrylonitrile butadiene styrene (ABS) specimens are printed with custom printing parameters. These parameters give a tensile strength that is 86% of the injection- molded ABS strength, and give one of the best recorded results for 100% infill printed ABS tensile specimens. Furthermore, a post filling technique has been studied. Specimens are printed with inner voids and different densities using slicing software. Void shape is precisely selected to conform to the filling process. High-strength, low-cost thermoset resin is injected through specimens to fill those voids. A tensile test has been performed after the full curing of the resin. A morphology analysis is done. Using this technique strength to printed weight ratio is improved by 151% and the cost is reduced by 51%. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) has various independent parameters that affect the mechanical properties and quality of the produced parts that are not linearly the function of each other. Process parameters in metal AM are very hard to control, analyse and optimise because they affect each other even though they can be independently changed. Changing process parameters in a wide range is not possible due to the formation of problems such as cracks, balling, unmelted powders, porosity and distortion. In this paper, a numerical model to predict the value of tensile strength of selective laser melting (SLM) Ti-6Al-4V parts and analyse the effect of process parameters on the results has been proposed. Taguchi L25 Design of Experiment (DOE) across 125 samples to create a comprehensive and general overview of influential parameters on the build process was investigated. Specifically, parameters included laser power, scan speed, hatch spacing, laser pattern angle and heat treatment (HT). To evaluate and analyse the build process according to established statistical variances, a minimum of five samples based on ASTM standard (for tensile test) were prepared. Heat treatment was added to the DOE to analyse the combined process and post-process effects. Results were compared (cross-validated) against existing values found in the literature and were found to effectively predict and explain the behaviour of tensile strength when changing process parameters. [ABSTRACT FROM AUTHOR]

The aim of this study is to evaluate the effect of printing parameters and their interactions on the mechanical properties of ABS-based specimen, 3D printed by fused deposition modeling (FDM), using the response surface method. The manufacturing direction (X, Y, or Z) and the deposition angle (0°, 30°, or 45°) are analyzed as input factors. The Young modulus, the yield stress, the tensile strength, and the deformation at fracture in tension are considered as responses. An empirical model for each response is built in terms of factors and their interactions. The predicted results are in good coherence with experimental ones. The original contribution of this paper consists in the evaluation of the optimal combination of manufacturing parameters thanks to the MINITAB software. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) started as a rapid prototyping (RP) technology to aid in visualizing and validating designs in the design process. However, with the recent improvements in metal AM parts, functional parts can be manufactured using laser-based AM. Currently, metal AM parts have comparable mechanical properties to traditional manufacturing parts. 15-5PH stainless steel and Inconel 718 are two of the most commonly used metals in laser-based AM, and they have a high modulus of elasticity and tensile strength and can be precipitate hardened to increase their strength and hardness by heat treatment. These properties make 15-5PH stainless steel and Inconel 718 suitable for many industrial applications such as aerospace and automotive. However, due to the nature of AM, AM parts usually suffer from anisotropy. In this paper, the mechanical properties such as tensile strength, modulus of elasticity, yield strength, and ductility are investigated at various elevated temperatures up to 350 °C and compared with the mechanical properties at room temperature using specimens printed in three different orientations to capture the effect on the anisotropy. In addition to that, the microstructure of the specimens is studied to investigate the influence of elevated temperature on the specimens. [ABSTRACT FROM AUTHOR]

In this paper, the effect of additive particles on the mechanical properties of ultraviolet (UV)-cured resin was evaluated based on tensile strength and shear strength. The experimental results showed that the tensile strength was improved with proper particle addition, but the shear strength was always decreased. Moreover, the effects of additive particles on the holding force of diamond abrasive, critical exposure energy, and penetration depth of UV-cured resin were elucidated. The holding force of resin with 15 wt.% Al2O3 addition was found to be higher than that of pure UV resin. Based on the experimentally determined critical UV exposure energy and penetration depth, UV-cured resins with and without additive particles were used to fabricate grinding wheels using additive manufacturing technology. Grinding experiment demonstrated the performance of UV resinoid grinding wheels was significantly improved with the addition of 15 wt.% Al2O3 particles. [ABSTRACT FROM AUTHOR]