Search

The paper establishes a correspondence between the solutions for rectilinear cracks located in a piezoceramic plane at a right angle to the polarization axis and smoothly (no friction) opened with rigid wedges and the solutions for cracks in a purely elastic isotropic plane. This correspondence can be used to calculate the SIFs for cracks in a piezoceramic plane from the expressions for cracks in an elastic isotropic plane, without the need to solve the electroelastic problem. The following problems are solved as examples: opening of a semi-infinite crack with a semi-infinite rounded wedge, a truncated wedge, and a wedge of constant thickness; opening of two semi-infinite cracks with hyperbolic wedges and wedges of constant thickness [ABSTRACT FROM AUTHOR]

The paper is concerned with the fracture process zone at the tip of a crack at the nonsmooth interface between isotropic elastic media. A plane symmetric problem is formulated. The zone is modeled by lines of discontinuity of the normal displacement at the interface. The exact solution of the elastic problem is found by the Wiener-Hopf method [ABSTRACT FROM AUTHOR]

The paper studies the stress rupture behavior of a reinforced viscoelastic composite through which a penny-shaped mode I crack propagates under a constant load. The composite has hexagonal symmetry and consists of elastic isotropic fibers and viscoelastic isotropic matrix. The material is modeled as a transversely isotropic homogeneous viscoelastic medium with effective characteristics. The crack is in the isotropy plane. The ring-shaped fracture process zone at the crack front is modeled by a modified Dugdale zone with time-dependent stresses. The viscoelastic properties of the matrix are characterized using a resolvent integral operator. Use is made of Volterra's principle, the method of operator continued fractions, and the theory of precritical crack growth in viscoelastic bodies. The problem is reduced to nonlinear integral equations. Numerical results are obtained for certain components of the composite, constant volume fractions, and different fracture strengths [ABSTRACT FROM AUTHOR]

This paper is concerned with dynamic problems in fracture mechanics for elastic solids having cracks with contacting faces. The contact problem for a penny-shaped crack with a nonzero initial opening under normally incident harmonic wave is solved by the method of boundary integral equations. The solutions are compared with those that neglect the contact interaction of the crack faces. Results are presented for different values of the initial crack opening [ABSTRACT FROM AUTHOR]

The paper proposes an approach to form (by special heat treatment) a structure and phase composition of martensitic steel that would enhance its ductility in the high-strength state. A correlation is experimentally established between the stability of fracture resistance and ductility in linear and plane stress states. The behavior of the scatterband of the ultimate strength with increase in the degree of ductility is analyzed. The possibility of predicting the ultimate strength from the lower edge of its scatterband is demonstrated with an example of a circular cylindrical shell [ABSTRACT FROM AUTHOR]

The paper reports on the results from analysis of some nonclassical fracture problems that allow for stresses along cracks. The results have been obtained by the author and his collaborators at the Institute of Mechanics (Kiev) since 1980 [ABSTRACT FROM AUTHOR]