Search

Nanoindentation has been utilized to investigate the variations of the interatomic distances in both the initial and bulk states of the β-Al3Mg2, e-Al30Mg23 and γ-Al12Mg17 phases. This technique has enabled the identification of the properties of these phases throughout the process. Continuing previous nanoindentation simulations conducted on the same phases [1], this study aims to further understand the behavior of these materials under molecular dynamics along the [001] direction. A proportional relationship between the applied load and atomic displacement affects the pair-wise distance, depth, and penetration amplitude for the three phases. Among them, the ε-Al30Mg23 phase demonstrated the greatest depth and amplitude of deformation compared to the β-Al3Mg2 and γ-Al12Mg17 phases. Interatomic distances between Mg-Mg, Mg-Al, and Al-Al in the three phases indicate a transition from an ordered crystalline structure to a more energetic disordered structure. These behaviors vary among the phases. To characterize the phase structures, a common neighbor analysis was employed. It was found that in the β-Al3Mg2 phase, the Al-Mg atoms are arranged within face-centered cubic (fcc), hexagonal close-packed (hcp), icosahedral (ico), and structure of type other. The ε-Al30Mg23 phase is primarily arranged in icosahedral and other unspecified structures. Meanwhile, the γ-Al12Mg17 phase is arranged in body-centered cubic (bcc), icosahedral, and structure of type other. [ABSTRACT FROM AUTHOR]

This research aims to investigate the deformation mechanisms and mechanical response of a Nb/Cu bilayer thin film under nanoindentation using molecular dynamics (MD) simulations. The specific objectives of this study are to explore the impact of indentation velocity ranging from 10 to 150 m/s on defect formation and hardness, and to understand the correlation between deformation behavior and loading rate. The hypothesis is that lower indentation velocities will result in a load-displacement curve with an initial linear region indicating elastic deformation, while higher velocities will produce a serrated profile, indicating plastic behavior. The relative hardness of the Nb/Cu sample is expected to vary with increasing velocity from 10 m/s to 50 m/s until reaching a certain threshold, beyond which it may increase due to enhanced strain hardening effects. Additionally, the load-displacement curves may show load drops corresponding to specific indentation depths. These drops could be attributed to the occurrence of defects such as atomic rearrangements or dislocation nucleation at critical depths. Analyzing these phenomena will provide valuable insights into the nanoscalemechanical properties of Nb/Cu bilayer thin films and their relationship with indentation velocities. [ABSTRACT FROM AUTHOR]

This study presents the angle of inclination on Williamson fluid, Ohmic heating, and heat analysis of thermal radiation. The derived equations are transformed into dimensionless forms, and the coupled differential equations that emerge are solved using The Homotopy (HPM). Excellent agreement is found when the HPM solution for the profile of velocity is compared with the exact analytical answer. Rising thermal radiation parameter values speed up fluid velocity while falling Reynolds number and magnetic parameter slow it down. Furthermore, every flow parameter studied raises fluid temperature, with the exception of the Weissenberg and Prandtl numbers. [ABSTRACT FROM AUTHOR]