269 results on '"Solntsev AS"'
Search Results
2. On the Nature of the Decrease in the Rate of the B2 Ordering Process in a Cu–Pd Solid Solution as the Equiatomic Composition Is Approached
3. Effect of Ultrasonic Treatment of Pd–4 at % In–1 at % Ru Membrane Foil: Sorption and Hydrogen Permeability
4. Preparation and Properties of Transparent Scandium Oxide-Modified Nd:YAG Ceramics
5. Microstructure and Impact Toughness of Acicular Ferrite in Low Alloy Steel Weld Joints from Results of Multiple Impact Bending Tests
6. Kinetics of High-Temperature Nitridation of Zr–Nb Solid Solutions
7. Preparation of Zirconium Carbide-Based Refractory Ceramics by Direct Zirconium Carburization
8. Specific Features of Nuclear and Thermophysical Calculations of (Zr,U)N Nuclear Fuel Prepared Using an Oxidation-Assisted Engineering Approach
9. Thermodynamic Modeling of Phase Equilibria in the Nb–Zr–N System
10. Structural Transformations of Ceramics Forming during High-Temperature Nitridation of Zr–Nb Alloys
11. Phase Transformations Accompanying High-Temperature Nitridation of Zr–Nb Alloys
12. Structure, Texture, and Substructure of Foil in Sequential Rolling Steps of Cu–36.4 at % Pd Alloy
13. Preparation of Niobium Carbide-Based High-Temperature Ceramics by Direct Niobium Carburization
14. Thermodynamic Modeling of Phase Equilibria in the U–Zr–N System
15. Hypoeutectoid and Pearlite Ferrite Aggregates in Low-Carbon, Low-Alloy Steel
16. Thermal Expansion Coefficient of a Pd–Cu Solid Solution
17. Reversibility of the β ↔ α Phase Transformations as the Key Factor Determining Whether the Pd–Cu Membrane Foil Texture Depends on the Foil Preparation Process
18. Nature of the Scatter in the Impact Toughness of Low-Carbon, Low-Alloy Steel for Fracture under Ductile-to-Brittle Transition Conditions
19. Techniques for Surface Cleaning of Membrane Foil from Palladium-Based Solid Solutions
20. SiC-Fiber Reinforced Silicon Carbide-Based Ceramic Composite
21. Flash Lamp Processing-Activated Structural Transformations in Foil of a Pd–Cu Solid Solution
22. Structural and Phase Transformations in Compact Titanium Nitride-Based Ceramics during High-Temperature Heating in Gaseous Media
23. Phase Transformations in the Surface Layer of Compact Zirconium Nitride-Based Ceramics
24. Effect of the Type and Morphology of Grain Boundaries on Stress Corrosion Cracking in Low-Alloy, Low-Carbon Steel
25. Development of Modern Fundamental Materials Science at the Faculty of Materials Science of the Moscow State University
26. Morphology of TiO2 Layers with a Well-Developed Acicular–Fibrous Structure in VT-20 Titanium
27. Nature of Microcracks in Ferritic Steels Occurred during Fracture under Conditions of Ductile-Brittle Transition Temperature Region
28. Structure and Hardness of Ceramics Produced through High-Temperature Nitridation of Titanium Foil
29. Effect of Barothermal Processing on the Solid-State Formation of the Structure and Properties of 16 at % Si–Al Hypereutectic Alloy
30. Synthesis and sintering of submicron Nd:YAG particles prepared from carbonate precursors
31. Structure of ceramics produced through high-temperature nitridation of hafnium foil
32. High-temperature titanium nitridation kinetics
33. Stability of the structure of compact zirconium nitride ceramics to irradiation with high-energy xenon ions
34. Irradiation of titanium, zirconium, and hafnium nitrides with high-energy ions
35. The nature of structural inhomogeneity in ceramics produced by zirconium nitridation
36. Structure and hardness of ceramics produced through high-temperature nitridation of zirconium foil
37. Structure and ionic conductivity of a beta-alumina-based solid electrolyte prepared from sodium polyaluminate nanopowders
38. Kinetics of zirconium saturation with nitrogen during high-temperature nitridation
39. Effect of carbonate precursor synthesis conditions on the formation of monodisperse Nd:YAG nanopowders
40. Ceramic materials and phosphors based on silicon nitride and sialon
41. Barothermal analysis of phase transformations of an Al-15 at % Ni alloy and its structure and magnetic properties
42. High-pressure phase transformations, microstructure, and magnetic properties of the hypereutectic alloy 10Ni-90Al
43. Sol-gel synthesis and properties of doped lanthanum chromite nanopowders
44. Hot-pressed Si3N4 ceramics containing CaO-Al2O3-AlN modifying additives
45. Si3N4/TiN composites produced from TiO2-Modified Si3N4 powders
46. Synthesis and cathodoluminescence characteristics of europium-doped Ca-sialons
47. Phase transformations during the synthesis and sintering of Y2 − x Yb x O3 nanopowders
48. Orientation and microstructure of chemoepitaxial ZrO2 films
49. Microstructure and properties of silicon nitride ceramics with calcium aluminate additions
50. The phenomenon of bifurcation in the processes of oxidative construction of thin-wall ceramics under heating of solid titanium preforms
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.