Search

Solid solutions of Yb2-xAxCdSb2 (A = Ca, Sr, Eu; x ≤ 1) are of interest for their promising thermoelectric (TE) properties. Of these solid solutions, Yb2-xCaxCdSb2 has end members with different crystal structures. Yb2CdSb2 crystallizes in the polar space group Cmc21, whereas Ca2CdSb2 crystallizes in the centrosymmetric space group Pnma. Other solid solutions, Yb2-xAxCdSb2 (A = Sr, Eu), crystallize in the polar space group for x ≤ 1, and compositions with x ≥ 1 have not been reported. Both structure types are composed of corner-sharing CdSb4 tetrahedra condensed into sheets that differ by the stacking of the layers. Single crystals of the solid solution Yb2-xCaxCdSb2 (x = 0-1) were studied to elucidate the structural transition between the Yb2CdSb2 and Ca2CdSb2 structure types. For x ≤ 1, the structures remain in the polar space group Cmc21. As the Ca content is increased, a positional disorder arises in the intralayer cation sites (Yb2/Ca2) and the Cd site, resulting in inversion of the CdSb4 tetrahedral chain. This phenomenon could be indicative of an intergrowth of the opposing space group. The TE properties of polycrystalline samples of Yb2-xCaxCdSb2 (x ≤ 1) were measured from 300 to 525 K. The lattice thermal conductivity is extremely low (0.3-0.4 W/m·K) and the Seebeck coefficients are high (100-180 μV/K) across the temperature range. First-principles calculations show a minimum in the thermal conductivity for the x = 0.3 composition, in good agreement with experimental data. The low thermal conductivity stems from the acoustic branches being confined to low frequencies and a large number of phonon scattering channels provided by the localized optical branches. The TE quality factor of the Yb1.7A0.3CdSb2 (A = Ca, Sr, Eu) series has been calculated and predicts that the A = Ca and Sr solid solutions may not improve with carrier concentration optimization but that the Eu series is worthy of additional modifications. Overall, the x = 0.3 compositions provide the highest zT because they provide the best electronic properties with the lowest thermal conductivity.

The structure, magnetic properties, and 151Eu and 119Sn Mossbauer spectra of the solid-solution Eu11–xSrxZn4Sn2As12 are presented. A new commensurately modulated structure is described for Eu11Zn4S...

The mineral Zlatogorite, CuNiSb2, was synthesized in the laboratory for the first time by annealing elements at ambient pressure (CuNiSb2-AP). Rietveld refinement of synchrotron powder X-ray diffraction data indicates that CuNiSb2-AP crystallizes in the NiAs-derived structure (P3m1, #164) with Cu and Ni ordering. The structure consists of alternate NiSb6 and CuSb6 octahedral layers via face-sharing. The formation of such structure instead of metal disordered NiAs-type structure (P63/mmc, #194) is validated by the lower energy of the ordered phase by first-principle calculations. Interatomic crystal orbital Hamilton population, electron localization function, and charge density analysis reveal strong Ni-Sb, Cu-Sb, and Cu-Ni bonding and long weak Sb-Sb interactions in CuNiSb2-AP. The magnetic measurement indicates that CuNiSb2-AP is Pauli paramagnetic. First-principle calculations and experimental electrical resistivity measurements reveal that CuNiSb2-AP is a metal. The low Seebeck coefficient and large thermal conductivity suggest that CuNiSb2 is not a potential thermoelectric material. Single crystals were grown by chemical vapor transport. The high pressure sample (CuNiSb2-8 GPa) was prepared by pressing CuNiSb2-AP at 700 °C and 8 GPa. However, the structures of single crystal and CuNiSb2-8 GPa are best fit with a disordered metal structure in the P3m1 space group, corroborated by transmission electron microscopy.

Solid solutions of Yb

The structure, magnetic properties, and

The mineral Zlatogorite, CuNiSb

Type I clathrates of the composition K8E8Ge38 (E = Al, Ga, In) were prepared via the reaction of KH with E and Ge and thermoelectric properties measured in order to compare to K8Al8Si38, a promisin...

Solvent effects on the microwave-assisted synthesis of germanium nanoparticles are presented. A mixture of oleylamine and 1-dodecene was used as the reaction solvent. Oleylamine serves as a reducing agent in the synthesis while both molecules act as binding ligands. Increased concentrations of 1-dodecene in the solvent mixture were found to increase the size of the formed nanoparticles. Crystallinity was also dependent on the solvent mixture. Amorphous nanoparticles were obtained at lower 1-dodecene concentrations, whereas, at higher concentrations, particles contained crystalline and amorphous domains. 11-Methoxyundec-1-ene was synthesized to replace 1-dodecene in the reaction mixture for nuclear magnetic resonance (NMR) studies. 1H NMR of the reaction products shows that both solvent molecules in the system act as binding ligands on the nanoparticle surface. Nanoparticles were characterized using powder X-ray diffraction, scanning transmission electron microscopy, and spectroscopy techniques (Raman, UV–...

Eu11–xYbxCd6Sb12 Zintl solid solutions have been prepared by tin flux reaction by employing the elements Eu/Yb/Cd/Sb/Sn in the ratio 11 – xp:xp:6:12:30, where xp is an integer less than 11 representing the preparative amount of Eu (11 – xp) and Yb (xp). Efforts to make the Yb compositions for x exceeding ∼3 resulted in structures other than the Sr11Cd6Sb12 structure type. The crystal structures and compositions were determined by single-crystal and powder X-ray diffraction and wavelength-dispersive X-ray analysis measurements. The title solid-solution Zintl compounds crystallize in the centrosymmetric monoclinic space group C2/m (no. 12, Z = 2) as the Sr11Cd6Sb12 structure type (Pearson symbol mC58), and the lattice parameters decrease with increasing ytterbium content. Single crystal X-ray diffraction shows that Yb atoms are not randomly distributed in the Eu sites but have a site preference which can be attributed to size effects. The influence of the rare earth (RE) metal sites on thermal and electroni...

Type I clathrates of the composition K

A novel Zintl phase structure type, Eu7Cd4Sb8-xAsx (x = 2, 3, 4, and 5), with the general formula Eu7Cd4Pn8 (Pn = mixed occupancy Sb and As), was synthesized by molten tin flux reaction. Its structure was determined using single-crystal X-ray diffraction methods. This structure type is only preserved for 2 ≤ x ≤ 5 under our experimental conditions, and efforts to synthesize samples with x2 or x5 resulted in other structure types. The mixed occupancy Sb and As can be thought of as a pseudoatom whose ideal size, in this range of Sb/As ratios, fits the structure. The title phase crystallizes in the I-centered monoclinic space group I2/m (No. 12, Z = 4) with unit cell parameters ranging as follows: a = 19.7116(17)-19.4546(13) Å, b = 4.6751(4)-4.6149(3) Å, c = 24.157(2)-23.871(15) Å, and β = 95.8798(1)-96.016(5)°, depending on the Sb/As ratio. The structure can be described as parallel double pentagonal tubes resulting from Cd-Pn and Pn-Pn bonding. These double pentagons are formed through corner sharing of the Cd-centered CdPn4 tetrahedra and a Pn-Pn interaction from two adjacent CdPn4 tetrahedra. This structure type is closely related to the Sr11Cd6Sb12 structure type as both share the same bonding features of Pn-Pn bonding and double pentagonal tubes. Electron microprobe analysis confirms the composition of these new Zintl solid solution phases. The As exhibits preferential substitution on specific sites, and site specificity trends are supported by lowest energy models from theoretical calculations. Theoretical calculations also predict that Sb-rich compounds should be metallic or semimetallic and that they should become more insulating as As content increases. Members of the solid-solution order ferromagnetically between 5 and 6 K and exhibit relatively low electrical resistivity between 50 and 300 K, ranging from ∼0.57 to ∼26 mΩ·cm, increasing with increasing As content.

The synthesis, crystal structure, magnetic properties, and europium Mossbauer spectroscopy of the new members of the 9–4–9 Zintl family of Eu9Cd4–xCM2+x–y□ySb9 (CM = coinage metal: Au, Ag, and Cu) are reported. These compounds crystallize in the Ca9Mn4Bi9 structure type (9–4–9) with the 4g interstitial site almost half-occupied by coinage metals; these are the first members in the 9–4–9 family where the interstitial positions are occupied by a monovalent metal. All previously known compounds with this structure type include divalent interstitials where these interstitials are typically the same as the transition metals in the anionic framework. Single-crystal magnetic susceptibility data indicate paramagnetic behavior for all three compounds with antiferromagnetic ordering below 10 K (at 100 Oe) that shifts to lower temperature (

Eu

The high temperature p-type thermoelectric material Yb(14)MnSb(11) has been of increasing research interest since its high temperature thermoelectric properties were first measured in 2006. Subsequent substitutions of Zn, Al, and La into the structure have shown that this material can be further optimized by altering the carrier concentration or by reduction of spin-disorder scattering. Here the properties of the Yb(14-x)Ca(x)MnSb(11) solid solution series where isovalent Ca(2+) is substituted for Yb(2+) will be presented. Crystals of the Yb(14-x)Ca(x)MnSb(11) solid solution series were made by Sn-flux (x = 2, 4, 6, 8) with the following ratio of elements: (14-x)Yb: xCa: 6 Mn: 11Sb: 86Sn, and their structures determined by single crystal X-ray diffraction. The density of the material significantly decreases by over 2 g/cm(3) as more Ca is added (from x = 1 to 8), because of the lighter mass of Ca. The resulting lower density is beneficial from a device manufacturing perspective where there is often a trade-off with the specific power per kilogram. The compounds crystallize in the Ca(14)AlSb(11) structure type. The Ca substitution contributes to systematic lengthening the Mn-Sb bond while shortening the Sb-Sb bond in the 3 atom linear unit with increasing amounts of Ca. Temperature dependent thermoelectric properties, Seebeck, electrical resistivity, and thermal conductivity were measured from room temperature to 1273 K. Substitution of Yb with Ca improves the Seebeck coefficient while decreasing the thermal conductivity, along with decreasing the carrier concentration in this p-type material resulting in an enhanced thermoelectric figure of merit, zT, compared to Yb(14)MnSb(11).

Single-crystalline samples of a new Zintl compound, Eu(3)Ga(2)P(4), have been synthesized by a Ga-flux method. Eu(3)Ga(2)P(4) is found to crystallize in a monoclinic unit cell, space group C2/c, isostructural to Ca(3)Al(2)As(4). The structure is composed of a pair of edge-shared GaP(4) tetrahedra, which link by corner-sharing to form Ga(2)P(4) two-dimensional layers, separated by Eu(2+) ions. Magnetic susceptibility showed a Curie-Weiss behavior with an effective magnetic moment consistent with the value for Eu(2+) magnetic ions. Below 15 K, ferromagnetic ordering was observed and the saturation magnetic moment was 6.6 μ(B). Electrical resistivity measurements on a single crystal showed semiconducting behavior. Resistivity in the temperature range between 280 and 300 K was fit by an activation model with an energy gap of 0.552(2) eV. The temperature dependence of the resistivity is better described by the variable-range-hopping model for a three-dimensional conductivity, suggesting that Eu-P bonds are involved in the conductivity. A large magnetoresistance, up to -30%, is observed with a magnetic field H = 2 T at T = 100 K, suggesting strong coupling of carriers with the Eu(2+) magnetic moment.

A hydrogen-containing inorganic clathrate with the nominal composition, K(7)(H(2))(3)Si(46), has been prepared in 98% yield by the reaction of K(4)Si(4) with NH(4)Br. Rietveld refinement of the powder X-ray diffraction data is consistent with the clathrate type I structure. Elemental analysis and (1)H MAS NMR confirmed the presence of hydrogen in this material. Type I clathrate structure is built up from a Si framework with two types of cages where the guest species, in this case K and H(2), can reside: a large cage composed of 24 Si, in which the guest resides in the 6d position, and a smaller one composed of 20 Si, in which the guest occupies the 2a position (cubic space group Pm3n). Potassium occupancy was examined using spherical aberration (Cs) corrected scanning transmission electron microscopy (STEM). The high-angle annular dark-field (HAADF) STEM experimental and simulated images indicated that the K is deficient in both the 2a and the 6d sites. (1)H and (29)Si MAS NMR are consistent with the presence of H(2) in a restricted environment and the clathrate I structure, respectively. FTIR and (29)Si{(1)H} CP MAS NMR results show no evidence for a Si-H bond, suggesting that hydrogen is present as H(2) in interstitial sites. Thermal gravimetry (TG) mass spectrometry (MS) provide additional confirmation of H(2) with hydrogen loss at approximately 400 degrees C.

Large, high quality single crystals of a new Zintl phase, EuIn(2)As(2), have been synthesized from a reactive indium flux. EuIn(2)As(2) is isostructural to the recently reported phase EuIn(2)P(2), and it is only the second reported member of the group of compounds with formula AM(2)X(2) (A = alkali, alkaline earth, or rare earth cation; M = transition or post-transition metal; and X = Group 14 or 15 element) that crystallizes in the hexagonal space group P6(3)/mmc (a = 4.2067(3) A, c = 17.889(2) A and Z = 2). The structure type contains layers of A(2+) cations separated by [M(2)X(2)](2-) layers along the crystallographic c-axis. Crystals of the title compound were mounted for magnetic measurements, with the crystallographic c-axis oriented either parallel or perpendicular to the direction of the applied field. The collective magnetization versus temperature and field data indicate two magnetic exchange interactions near 16 K, one involving Eu(2+)...Eu(2+) intralayer coupling and the other involving Eu(2+)...Eu(2+) coupling between layers. EuIn(2)As(2) is metallic and magnetoresistive, as is the isostructural phosphide, and both compounds have coincident resistivity and magnetic ordering transitions, consistent with the observation of colossal magnetoresistance. Negative colossal magnetoresistance (MR = {[rho(H) - rho(0)]/rho(H)} x 100%) of up to -143% (at T = 17.5 K, H = 5 T) is observed for EuIn(2)As(2), approximately half of that observed for the more resistive phosphide, which has a higher magnetic ordering temperature and local moment coupling strength.

Single crystals of boron-doped Ba8Al14Si31 clathrate I phase were prepared using Al flux growth. The structure and elemental composition of the samples were characterized by single-crystal and powder X-ray diffraction; elemental analysis; and multinuclear (27)Al, (11)B, and (29)Si solid-state NMR. The samples' compositions of Ba8B0.17Al14Si31, Ba8B0.19Al15Si31, and Ba8B0.32Al14Si31 were consistent with the framework-deficient clathrate I structure Ba8Al(x)Si(42-3/4x)cube(4-1/4x) (x = 14, cube = lattice defect). Solid-state NMR provides further evidence for boron doped into the framework structure. Temperature-dependent resistivity indicates metallic behavior, and the negative Seebeck coefficient indicates that transport processes are dominated by electrons. Thermal conductivity is low, but not significantly lower than that observed in the undoped Ba8Al14Si31 prepared in the same manner.

The antimony-121 Mössbauer spectra of the Yb14MnSb11 and Eu14MnSb11 Zintl compounds have been measured between 2 or 5 and 300 K. The resulting three-dimensional arrays of the spectral counts, velocity, and temperature have been simultaneously fit with a minimum number of free parameters. These fits yield a 0 Kelvin transferred hyperfine field of 2.9(2) T, a Curie temperature of 57(3) K, and a Mössbauer temperature of 182(2) K for Yb14MnSb11; in this case the transferred field arises solely from the ordering of Mn2+. Because Eu14MnSb11 has both Eu2+ and Mn2+ ions that are magnetically ordered, its antimony-121 Mössbauer spectra are more complex and reveal two magnetic transitions, the first at 92(1) K resulting from the ordering of the Mn2+ ions and the second at 9.5(1.0) K resulting from the ordering of the Eu2+ ions; the corresponding 0 Kelvin transferred hyperfine fields are 1.3(1) and 3.7(1) T. The antimony-121 isomer shifts yield electronic configurations of 5s1.745p4.28 and 5s1.745p4.19 for the average antimony anion in Yb14MnSb11 and Eu14MnSb11, respectively.

A molten Al flux method was used to grow single crystals of the type I clathrate compound Ba8Al14Si31. Single-crystal neutron diffraction data for Ba8Al14Si31 were collected at room temperature using the SCD instrument at the Intense Pulsed Neutron Source, Argonne National Laboratory. Single-crystal neutron diffraction of Ba8Al14Si31 confirms that the Al partially occupies all of the framework sites (R1 = 0.0435, wR2 = 0.0687). Stoichiometry was determined by electron microprobe analysis, density measurements, and neutron diffraction analysis. Solid-state (27)Al NMR provides additional evidence for site preferences within the framework. This phase is best described as a framework-deficient solid solution Ba8Al14Si31, with the general formula, Ba(8)Al(x)Si(42-3/4x)[](4-1/4x) ([] indicates lattice defects). DSC measurements and powder X-ray diffraction data indicate that this is a congruently melting phase at 1416 K. Temperature-dependent resistivity reveals metallic behavior. The negative Seebeck coefficient indicates transport processes dominated by electrons as carriers.

The framework-deficient clathrate phases Ba7.5Al13Si29 and Eu0.27Ba7.22Al13Si29 were prepared using a molten Al flux. Single-crystal X-ray diffraction confirmed the two phases to be clathrate type I (space group Pmn). For Eu0.27Ba7.22Al13Si29, single-crystal X-ray diffraction revealed the Eu to partially occupy the 2a position. Microprobe analysis of single crystals provided the stoichiometry, and Raman spectroscopy was used to investigate the guest framework interactions. The Raman spectra are consistent with both Ba7.5Al13Si29 and Eu0.27Ba7.22Al13Si29 having minimal guest-host interactions. Magnetic susceptibility data for Eu0.27Ba7.22Al13Si29 imply weak magnetic ordering and indicate a 2+ oxidation state for the Eu ion.

The europium-151 Mossbauer spectra of the Eu(14)MnP(11), Eu(14)MnAs(11), and Eu(14)MnSb(11) Zintl compounds, measured between 4.2 and 100 K, reveal europium(II) for all four crystallographically inequivalent europium sites in Eu(14)MnAs(11) and Eu(14)MnSb(11) and europium(II) and europium(III) for the three 32g and the 16f europium sites in Eu(14)MnP(11), respectively. Below the ordering temperatures of 52, 74, and 92 K, only very small hyperfine fields of 2-4 T are observed at the europium sites as a result of the polarization by the manganese magnetic moments. At 4.2 K, the europium(II) magnetic moments are ordered, and hyperfine fields of 24.4, 24.8, and 19.3 T are observed in Eu(14)MnP(11), Eu(14)MnAs(11), and Eu(14)MnSb(11), respectively, fields that are typical for magnetically ordered europium(II) ions. At 4.2 K the 16f europium(III) sites in Eu(14)MnP(11) experience a transferred hyperfine field of 33 T from the neighboring ordered europium(II) moments. Between its Curie temperature and 4.2 K, the europium-151 Mossbauer spectra of Eu(14)MnSb(11) reveal that the europium(II) moments order below ca. 13 K, i.e., below the second magnetic transition observed in magnetic measurements. Between their Curie temperatures and 4.2 K, the europium-151 Mossbauer spectra of Eu(14)MnP(11) and Eu(14)MnAs(11) are complex and have been analyzed with two models, models that give equivalently good fits. However, the second model in which the spectra are fit with a three-dimensional relaxation of the europium(II) and europium(III) hyperfine fields is preferred for its physical meaning and its reduced number of fitted parameters.

A new transition metal Zintl phase, Yb(9)Zn(4+x)Sb(9), was prepared by high-temperature flux syntheses as large single crystals, or by direct fusion of the corresponding elements in polycrystalline form. Its crystal structure was determined by single-crystal X-ray diffraction. Its Ca-counterpart, hitherto known as Ca(9)Zn(4)Sb(9), and the presence of nonstoichiometry in it were also studied. Yb(9)Zn(4+x)Sb(9) was found to exist in a narrow homogeneity range, as suggested from the crystallographic data at 90(3) K (orthorhombic, space group Pbam (No. 55), Z = 2): (1) a = 21.677(2) A, b = 12.3223(10) A, c = 4.5259(4) A, R1 = 3.09%, wR2 = 7.18% for Yb(9)Zn(4.23(2))Sb(9); (2) a = 21.706(2) A, b = 12.3381(13) A, c = 4.5297(5) A, R1 = 2.98%, wR2 = 5.63% for Yb(9)Zn(4.380(12))Sb(9); and (3) a = 21.700(2) A, b = 12.3400(9) A, c = 4.5339(4) A, R1 = 2.75%, wR2 = 5.65% for Yb(9)Zn(4.384(14))Sb(9). The isostructural Ca(9)Zn(4.478(8))Sb(9) has unit cell parameters a = 21.830(2) A, b = 12.4476(9) A, and c = 4.5414(3) A (R1 = 3.33%, wR2 = 5.83%). The structure type in which these compounds crystallize is related to the Ca(9)Mn(4)Bi(9) type, and can be considered an interstitially stabilized variant. Formal electron count suggests that the Yb or Ca cations are in the +2 oxidation state. This is supported by the virtually temperature-independent magnetization for Yb(9)Zn(4.5)Sb(9). Electrical resistivity data show that Yb(9)Zn(4.5)Sb(9) and Ca(9)Zn(4.5)Sb(9) are poor metals with room-temperature resistivity of 10.2 and 19.6 mOmega.cm, respectively.

The synthesis, crystal structure, magnetic properties, and europium Mössbauer spectroscopy of the new members of the 9-4-9 Zintl family of Eu(9)Cd(4-x)CM(2+x-y)□(y)Sb(9) (CM = coinage metal: Au, Ag, and Cu) are reported. These compounds crystallize in the Ca(9)Mn(4)Bi(9) structure type (9-4-9) with the 4g interstitial site almost half-occupied by coinage metals; these are the first members in the 9-4-9 family where the interstitial positions are occupied by a monovalent metal. All previously known compounds with this structure type include divalent interstitials where these interstitials are typically the same as the transition metals in the anionic framework. Single-crystal magnetic susceptibility data indicate paramagnetic behavior for all three compounds with antiferromagnetic ordering below 10 K (at 100 Oe) that shifts to lower temperature (7 K) by applying a 3 T magnetic field. (151)Eu Mössbauer spectra were collected on polycrystalline powder samples of Eu(9)Cd(4-x)CM(2+x-y)□(y)Sb(9) at 50 and 6.5 K in order to evaluate the valence of Eu cations. Although the Zintl formalism states that the five crystallographically distinct Eu sites in Eu(9)Cd(4-x)CM(2+x-y)□(y)Sb9 should bear Eu(2+), the Mössbauer spectral isomer shifts are clearly indicative of both 2+ and 3+ valence of the Eu cations with the Cu- and Au-containing compounds showing higher amounts of Eu(3+). This electronic configuration leads to an excess of negative charge in these compounds that contradicts the expected valence-precise requirement of Zintl phases. The spectra obtained at 6.5 K reveal magnetic ordering for both Eu(2+) and Eu(3+). The field dependence of Eu(2+) indicates two distinct magnetic sublattices, with higher and lower fields, and of a small field for Eu(3+). The site symmetry of the five Eu sites is not distinguishable from the Mössbauer data.

A new barium copper phosphide compound, BaCu10P4, was synthesized by reacting stoichiometric amounts of the elements at 1200 °C for 24 h. BaCu10P4 crystallizes in the monoclinic space group C2/m, with unit cell dimensions a = 23.288(4) b = 3.9070(10), and c = 9.534(2) A and β = 92.26(2)° (Z = 4). The structure can be described as consisting of chains of edge-shared Cu4 tetrahedral prisms that are knitted together by P atoms. The structure is related to BaCu8P4, which can be described in a similar fashion. Temperature-dependent resistivity measurements indicate that BaCu10P4 is a metal. Extended Huckel band calculations are consistent with metallic character for BaCu10P4 through Cu−Cu interactions. Orbitals at the Fermi level show Cu−Cu bonding overlap. On the other hand, BaCu8P4 reveals extremely weak Cu−Cu interactions, but rather optimizes Cu−P bonding.

Two rare-earth-containing ternary phosphides, Eu3Ga2P4 and Eu3In2P4, were synthesized by a two-step solid-state method with stoichiometric amounts of the constitutional elements. Refinements of the powder X-ray diffraction are consistent with the reported single-crystal structure with space group C2/c for Eu3Ga2P4 and Pnnm for Eu3In2P4. Thermal gravimetry and differential scanning calorimetry (TG-DSC) measurements reveal high thermal stability up to 1273 K. Thermal diffusivity measurements from room temperature to 800 K demonstrate thermal conductivity as low as 0.6 W/m·K for both compounds. Seebeck coefficient measurements from room temperature to 800 K indicate that both compounds are small band gap semiconductors. Eu3Ga2P4 shows p-type conductivity and Eu3In2P4 p-type conductivity in the temperature range 300-700 K and n-type conductivity above 700 K. Electronic structure calculations result in band gaps of 0.60 and 0.29 eV for Eu3Ga2P4 and Eu3In2P4, respectively. As expected for a valence precise Zintl phase, electrical resistivity is large, approximately 2600 and 560 mΩ·cm for Eu3Ga2P4 and Eu3In2P4 at room temperature, respectively. Measurements of transport properties suggest that these Zintl phosphides have potential for being good high-temperature thermoelectric materials with optimization of the charge carrier concentration by appropriate extrinsic dopants.

Samples of the type-I clathrate Sr(8)Al(x)Si(46-x) have been prepared by direct reaction of the elements. The type-I clathrate structure (cubic space group Pm3n) which has an Al-Si framework with Sr(2+) guest atoms forms with a narrow composition range of 9.54(6) ≤ x ≤ 10.30(8). Single crystals with composition A(8)Al(10)Si(36) (A = Sr, Ba) have been synthesized. Differential scanning calorimetry (DSC) measurements provide evidence for a peritectic reaction and melting point at ∼1268 and ∼1421 K for Sr(8)Al(10)Si(36) and Ba(8)Al(10)Si(36), respectively. Comparison of the structures reveals a strong correlation between the 24k-24k framework sites distances and the size of the guest cation. Electronic structure calculation and bonding analysis were carried out for the ordered models with the compositions A(8)Al(6)Si(40) (6c site occupied completely by Al) and A(8)Al(16)Si(30) (16i site occupied completely with Al). Analysis of the distribution of the electron localizability indicator (ELI) confirms that the Si-Si bonds are covalent, the Al-Si bonds are polar covalent, and the guest and the framework bonds are ionic in nature. The Sr(8)Al(6)Si(40) phase has a very small band gap that is closed upon additional Al, as observed in Sr(8)Al(16)Si(30). An explanation for the absence of a semiconducting "Sr(8)Al(16)Si(30)" phase is suggested in light of these findings.

Samples with the type I clathrate structure and composition Ba(8)Al(x)Si(46-x), where x = 8, 10, 12, 14, and 15, were examined by neutron powder diffraction at 35 K. The clathrate type I structure contains Ba cations as guests in a framework derived from tetrahedrally coordinated Al/Si atoms. The framework is made up of five- and six-membered rings that form dodecahedral and tetrakaidecahedral cages. The change in distances between tetrahedral sites across the series is used to develop a model for the mixed Al/Si occupancy observed in the framework. The calculated volumes of the cages that contain the Ba atoms display a linear increase with increasing Al composition. In the smaller dodecahedral cages, the Ba atomic displacement parameter is symmetry constrained to be isotropic for all compositions. In the larger tetrakaidecahedral cages, the anisotropic atomic displacement of the Ba atom depends upon the composition: the displacement is perpendicular (x = 8) and parallel (x = 15) to the six-membered ring. This difference in direction of the displacement parameter is attributed to interaction with the Al in the framework and not to the size of the cage volume as x increases from 8 to 15. The influence of the site occupation of Al in the framework on displacement of the cation at the 6d site is demonstrated.

The authors have theoretically studied the bonding properties of Ca{sub 14}GaAs{sub 11} using the ab initio, self-consistent pseudopotential method within the local density approximation of density functional theory. Ca{sub 14}GaAs{sub 11} is an example of a new series of recently prepared compounds which have the stoichiometry A{sub 14}MPn{sub 11} (A = Ca, Sr, Ba; M = Al, Ga, Mn; Pn = As, Sb, Bi). They have found that the electronic structure and bonding of the Ca{sub 14}GaAs{sub 11} compound are consistent with the Zintl concept. In addition, the GaAs{sub 4} tetrahedra and the linear As{sub 3} groups contained in this compound are isolated units which are not arranged into an extended bonding network. The bonding within the GaAs{sub 4} group is slightly more ionic than the bonding in a GaAs crystal. The linear As{sub 3} unit can be accurately described as a hypervalent three-center, four-electron bonded structure. The A{sub 14}MPn{sub 11} structure type contains the first example of a discrete, hypervalent group 15 linear anion.

The phase Y{sub 10}I{sub 13}C{sub 2} is synthesized by the reaction at {approximately} 800{degree}C of powdered Y and YI{sub 3} with impure Y{sub 2}O{sub 3}, the vital carbon component resulting from incomplete decomposition of the yttrium oxalate precursor. The phase has not been obtained from more conventional carbon sources. The identity of carbon as the interstitial is supported by these syntheses, microprobe analyses of Y{sub 10}I{sub 13}C{sub 2} vs Y{sub 6}I{sub 7}C{sub 2}, and both the occupancy and the dimensions of the yttrium cavity in which carbon occurs. The phase occurs in space group C2/m, Z = 2; a = 21.317 (6) {angstrom}; c = 19.899 (5) {angstrom}; {beta} = 97.40 (2){degree}; R/R{sub w} = 3.3%/3.9% for 838 independent reflections with 2{theta} {le} 50{degree} (Mo K{alpha}). The compound consists of centered Y{sub 6}I{sub 12}C- and empty Y{sub 6}I{sub 8}-type clusters condensed by edge sharing into commensurate double and single chains, respectively. The chains are further cross-linked by additional iodine atoms. The two chain types are very similar to those known individually in the phases Y{sub 6}I{sub 7}C{sub 2} and Y{sub 4}Cl{sub 6} and are presumably metallic and semiconducting, respectively. The Y{sub 4}I{sub 6} chain is the first iodide example ofmore » condensed Y{sub 6}X{sub 8}-type clusters. This feature appears to be stabilized in this structure by a sterically less demanding means of bridging these chains between sheets of a Y{sub 6}I{sub 7}C{sub 2}-like arrangement. 30 refs., 3 figs., 3 tabs.« less

Single crystals of AxBa8-xAl14Si31 (A = Sr, Eu) were grown using a molten Al flux technique. Single-crystal X-ray diffraction confirms that AxBa8-xAl14Si31 (A = Sr, Eu) crystallize with the type I clathrate structure, and phase purity was determined with powder X-ray diffraction. Stoichiometry was determined to be Sr0.7Ba7.3Al14Si31 and Eu0.3Ba7.7Al14Si31 by electron microprobe analysis. These AxBa8-xAl14Si31 phases can be described as framework-deficient clathrate type I structures with the general formula, AxBa8-xAlySi42-3y/4[]4-1/4y. DSC measurements indicate that these phases melt congruently at 1413 and 1415 K for Sr0.7Ba7.3Al14Si31 and Eu0.3Ba7.7Al14Si31, respectively. Temperature-dependent resistivity indicates metallic behavior, and the negative Seebeck coefficient indicates transport processes dominated by electrons as carriers. Thermal conductivity of these phases remains low with Sr0.7Ba7.3Al14Si31 having the lowest values.

A new rare earth metal Zintl phase, Eu(3)In(2)P(4), was synthesized by utilizing a metal flux method. The compound crystallizes in the orthorhombic space group Pnnm with the cell parameters a = 16.097(3) A, b = 6.6992(13) A, c = 4.2712(9) A, and Z = 2 (T = 90(2) K, R1 = 0.0159, wR2 = 0.0418 for all data). It is isostructural to Sr(3)In(2)P(4). The structure consists of tetrahedral dimers, [In(2)P(2)P(4/2)](6-), that form a one-dimensional chain along the c axis. Three europium atoms interact via a Eu-Eu distance of 3.7401(6) A to form a straight line triplet. Single-crystal magnetic measurements show anisotropy at 30 K and a magnetic transition at 14.5 K. High-temperature data give a positive Weiss constant, which suggests ferromagnetism, while the shape of susceptibility curves (chi vs T) suggests antiferromagnetism. Heat capacity shows a magnetic transition at 14.5 K that is suppressed with field. This compound is a semiconductor according to the temperature-dependent resistivity measurements with a room-temperature resistivity of 0.005(1) Omega m and E(g) = 0.452(4) eV. It shows negative magnetoresistance below the magnetic ordering temperature. The maximum magnetoresistance (Deltarho/rho(H)) is 30% at 2 K with H = 5 T.

The antimony-121 Mössbauer spectra of Eu10Mn6Sb13 have been measured between 2 and 295 K. Although the Zintl formalism indicates that the nine crystallographically distinct antimony sites in Eu10Mn6Sb13 should have formal valence states of -2, -1, 0, and +1, the Mössbauer spectral isomer shifts reveal that the valence states of the different sites are all quite similar and correspond to an average electronic configuration for antimony of 5s(1.7)5p(4.0). This configuration corresponds to an excess of negative charge on the antimony of 0.7 or an average valence of -0.7, a valence which is rather consistent with the average antimony valence of -0.61 obtained from the Zintl formalism for the nine antimony sites in Eu10Mn6Sb13. The spectra obtained between 90 and 295 K are more consistent with the absence rather than the presence of any transferred magnetic hyperfine field at the antimony. In contrast, the spectra obtained at 2 and 5 K reveal the presence of an average transferred magnetic hyperfine field of ca. 8 T, a field that arises from the ferromagnetic ordering of the near-neighbor manganese(II) ions.

There are a number of binary compounds which can be described as valence compounds and whose structures can be rationalized using the Zintl-Klemm rule, and are therefore considered to be Zintl compounds. Although some of these binary compounds are made up of anionic partial structures that are isoelectronic and isostructural with elemental structures, there are a large number of compounds with entirely new anionic structures. Considering the large number of binary compounds that exist whose structures are known, it is surprising that there are new structures are known, it is surprising that there are new structures still waiting to be discovered. Serendipity sometimes is the key, and herein we describe the synthesis, structure, and electronic characterization of the Zintl compound KSb{sub 2}.

A new transition-metal-containing Zintl compound, Eu(10)Mn(6)Sb(13), was prepared by a high-temperature Sn-flux synthesis. The structure was determined by single-crystal X-ray diffraction. Eu(10)Mn(6)Sb(13) crystallizes in the monoclinic space group C2/m with a = 15.1791(6) A, b = 19.1919(7) A, c = 12.2679(4) A, beta = 108.078(1)*, Z = 4 (R1 = 0.0410, wR2 = 0.0920), and T = 90(2) K. The structure of Eu(10)Mn(6)Sb(13) is composed of double layers of Mn-centered tetrahedra separated by Eu(2+) cations. The double layers are composed of edge- and corner-sharing Mn-centered tetrahedra which form cavities occupied by Eu(2+) cations and [Sb(2)](4-) dumbbells. Linear [Sb(3)](5-) trimers bridging two tetrahedra across the cavity are also present. Bulk susceptibility data indicate paramagnetic behavior with a ferromagnetic component present below 60 K. Temperature-dependent electrical resistivity measurements show semiconducting behavior above 60 K (E(a)() = 0.115(2) eV), a large and unusually sharp maximum in the resistivity at approximately 40 K, and metallic behavior below 40 K. (151)Eu Mössbauer spectra confirm that the europium is divalent with an average isomer shift of -11.2(1) mm/s at 100 K; the spectra obtained below 40 K reveal magnetic ordering of six of the seven europium sublattices and, at 4.2 K, complete ordering of the seven europium sublattices.

Synthesis and crystal structure of a new compound, BaCuZn(3)As(3), are reported. Single crystals of BaCuZn(3)As(3) are synthesized via NaCl/KCl flux reaction in a sealed fused silica ampule. Its elemental composition has been determined to be Ba/Cu/Zn/As = 1.03(4):1(0):2.91(6):2.98(3), suggesting BaCuZn(3)As(3) as the chemical formula. The structure of BaCuZn(3)As(3) has been determined by X-ray diffraction. It crystallizes in the orthorhombic Cmcm space group with a = 4.2277(3) A, b = 12.970(1) A, and c = 12.011(1) A at T = 90.7 K, and it exhibits a columnar structure along the a-axis. This structure is isotypic to beta-BaCu(4)S(3) but highly distorted. beta-BaCu(4)S(3) is considered to be a layered structure whereas BaCuZn(3)As(3) is a three-dimensional network.

Single crystals of the new transition metal Zintl phase, Ca(21)Mn(4)Sb(18), were prepared by high temperature melt synthesis. The crystal structure was determined by single crystal X-ray diffraction to be monoclinic in the space group C2/c. Crystal information was obtained at 90 K, and unit cell parameters were determined (a = 17.100(2) A, b = 17.073(2) A, c = 16.857(2) A, beta = 92.999(2) degrees, Z = 2, R1 = 0.0540, wR2 = 0.1437). The structure can be described as containing 4 discreet units per formula unit: 1 linear [Mn(4)Sb(10)](22-) anion, 2 dumbbell-shaped [Sb(2)](4-) anions, 4 individual Sb(3-) anions, and 21 Ca(2+) cations. The [Mn(4)Sb(10)](22-) anion contains four edge-shared MnSb(4) tetrahedra with distances between Mn ions of 3.388(4) A, 2.782(4) A, and 2.760(4) A. Electron counting suggests that the Mn are 2+. Temperature dependent magnetization shows a ferromagnetic-like transition temperature at approximately 52 K which is suppressed with increasing magnetic field. The paramagnetic regime is best fit to a ferrimagnetic model, providing a total effective moment of 4.04(2) mu(B), significantly less than that expected for 4 Mn(2+) ions (11.8 mu(B)). Temperature dependent resistivity shows that this compound is a semiconductor with an activation energy of 0.159(2) eV (100-300 K).

With the discovery of high-temperature superconductors, there is a renewed interest in complex layered metal-oxide compounds. In addition, there is a significant amount of interest in two-dimensional compounds due to their anisotropic physical properties. The authors interest in the synthesis and properties of ternary transition-metal pnictide compounds prompted their investigation of the synthesis and characterization of the novel layered oxide-pnictide compounds: A[sub 2]Mn[sub 3]X[sub 2]O[sub 2] (A = Sr, Ba; X = As, Sb, Bi). Although the single-crystal structure of these compounds has been reported, no other physical characterizations have been performed. They have successfully modified the reaction procedure to produce pure materials for physical property measurements. In addition, the new compound Ba[sub 2]Mn[sub 3]P[sub 2]O[sub 2] has been synthesized in high yield. This new compound is isostructural with the heavier group 15 (group VA) element analogues and has a unique two-dimensional structure with alternating metal-oxide and metal-phosphide layers separated by alkaline-earth-metal cations. This is one of the few examples of a solid-state compound that contains both oxygen and phosphorus atoms without direct bonding between them.

The synthesis and structural characterization of Ba{sub 3}Zn{sub 3}As{sub 2}O{sub 2} and Sr{sub 3}Zn{sub 3}As{sub 2}O{sub 2} is reported. These compounds are novel in that they are the first compounds without Mn that crystallize in the ThCr{sub 2}Si{sub 2} structure type. In addition, Zn is in a rare square planar oxygen coordination mode.

The title phases are obtained in high yield from the reactions of stoichiometric quantities of Y, YI/sub 3/, and graphite at 850-950/degree/C in welded Nb containers. The crystal structures of the two phases determined by standard x-ray diffraction means are related to those published for Er/sub 4/I/sub 5/ and Er/sub 6/I/sub 7/ (C2/m, Z = 2, /alpha/ = 18.479 (6) and 21.557 (8) /angstrom/, b = 3.947 (1) and 3.909 (1) /angstrom/, c = 8.472 (3) and 12.374 (6) /angstrom/, /beta/ = 103.22 (4) and 123.55 (3)/degree/, R/R/sub w/ = 4.6/5.4 and 3.2/3.7% for Y/sub 4/I/sub 5/C and Y/sub 6/I/sub 7/C/sub 2/, respectively). The two compounds contain infinite single and double chains of carbon-centered yttrium octahedra, respectively, condensed by edge-sharing and sheathed by edge-bridging iodine atoms together with square-planar iodine atoms that bridge between chains. Extended Hueckel MO band calculations were carried out for the empty and the carbon-centered compounds in both structures. Metal-based bands near E/sub F/ in the empty chains exhibit characteristic strong interactions with carbon valence orbitals that generate low-lying valence bands. E/sub F/ in both cases falls within a broad, metal-based conduction band. Resistivity and magnetic susceptibility measurements on Y/sub 6/I/sub 7/C/sub 2/ support the predictedmore » metallic character. 26 refs., 11 figs., 3 tabs.« less