Search

Solvent-assisted linker exchange (SALE) has recently emerged as an attractive strategy for the synthesis of metal-organic frameworks (MOFs) that are unobtainable via traditional synthetic pathways. Herein we present the first example of selective SALE in which only the benzimiadazolate-containing linkers in a series of mixed-linker zeolitic imidazolate frameworks (ZIF-69, -78, and -76) are replaced. The resultant materials (SALEM-10, SALEM-10b, and SALEM-11, respectively) are isostructural to the parent framework and in each case contain trifluoromethyl moieties. We therefore evaluated each of these materials for their hydrophobicity in condensed and gas phases. We expect that selective SALE will significantly facilitate the design of improved, and potentially complex, MOF materials with new and unusual properties.

Herein we report a new class of hemilabile ligands with boron-dipyrromethene (Bodipy) fluorophores that, when complexed to Pt(II), can signal changes in coordination mode through changes in their fluorescence. The ligands consist of phosphino-amine or phosphino-thioether coordinating moieties linked to the Bodipy's meso carbon via a phenylene spacer. Interestingly, this new class of ligands can be used to signal both ligand displacement and chelation reactions in a fluorescence "turn-on" fashion through the choice of weakly binding heteroatom in the hemilabile moiety, generating up to 10-fold fluorescence intensity increases. The Pt(II) center influences the Bodipy emission efficiency by regulating photoinduced electron transfer between the fluorophore and its meso substituent. The rates at which the excited Bodipy-species generate singlet oxygen upon excitation suggest that the heavy Pt(II) center also influences Bodipy's emission efficiency by affecting intersystem crossing from the Bodipy excited singlet to excited triplet states. This signaling strategy provides a quantitative read-out for changes in coordination mode and potentially will enable the design of new molecular systems for sensing and signal amplification.

Mo(0) dinitrogen complexes bearing electron-rich mono- and bidentate phosphines can be synthesized in good yields from inexpensive and readily accessible MoCl(5) via a one-step mild reduction with Mg metal. trans-[(N(2))(2)Mo(PMePh(2))(PPh(CH(2)CH(2)PPh(2))(2))] can also be obtained via this strategy. However, in the presence of tri- and tetradentate ligands that are sterically restrictive, the analogous reduction leads to either (η(6)-arene) formation or [Mo(multidentate phosphine)(m)](n) oligomer complexes that have no dinitrogen ligands. One such η(6)-arene complex, where the Mo(0) center is ligated by 1,1,1-tris(diphenylphosphinomethyl)ethane, was isolated and characterized via X-ray crystallography.

The halide-induced ligand rearrangement reaction (HILR) has been employed to provide selective and exclusive in situ formation of heteroligated Rh(I), Pd(II), and Pt(II) complexes with bidentate phosphino-chalcoether ligands. To gain insights on the nature of this unique reaction, we explored this process via the stepwise addition of bidentate phosphino-chalcoether (P, X; X = S or Se) and relevant monodentate phosphine ligands with a Pt(II) metal precursor. The corresponding monoligated complexes were obtained in quantitative yields by reacting 1 equiv of a P, X bidentate ligand with Pt(II) and were fully characterized via single crystal X-ray diffraction studies and heteronuclear ((31)P, (77)Se, and (195)Pt) NMR spectroscopy in solution. These species were further reacted with a second equivalent of either a bidentate ligand or the monodentate ethyl diphenylphosphine ligand, resulting in the clean formation of the heteroligated species or, in the case of the monodentate ligand with an electron-withdrawing bidentate ligand, a mixture of products. On the basis of competitive exchange reactions between these heteroligated, homoligated, and monoligated complexes, we conclude that ligand chelation plays a crucial role in the Pt(II) HILR. The in situ preferable formation of the stable monoligated complex allows for ligand sorting to occur in these systems. In all cases where the heteroligated product results, the driving force to these species is ligand chelation.

The Ru(II) compounds [Ru(bpy)(2)(mcbH)](2+) and [Ru(bpy)(2)(dafo)](2+), bpy is 2,2'-bipyridine where mcbH is 3-(CO(2)H)-2,2'-bipyridine and dafo is 4,5-diazafluoren-9-one, were synthesized, characterized, and anchored to nanocrystalline mesoporous TiO(2) thin films for excited state and interfacial electron transfer studies. X-ray crystallographic studies of [Ru(bpy)(2)(mcbH)](PF(6))(Cl) revealed a long Ru-N distance to the unsubstituted pyridine ligand of mcbH. Reaction of [Ru(bpy)(2)(dafo)](2+) with TiO(2) thin films resulted in interfacial chemistry. The IR, (1)H NMR, UV-vis, and photoluminescence spectral data indicated a room-temperature ring-opening reaction of the dafo ligand of [Ru(bpy)(2)(dafo)](2+) that ultimately yielded a carboxylate group in the 3-position of bipyridine anchored to TiO(2). Comparative reactions of [Ru(bpy)(2)(mcbH)](2+) with TiO(2) were performed and support this conclusion. In regenerative photoelectrochemical solar cells with 0.5 M LiI/0.05 M I(2) in acetonitrile, photocurrent action spectra were observed for both sensitized materials. The incident photon-to-current efficiency (IPCE) was significantly lower for Ru(bpy)(2)(dafo)/TiO(2), behavior attributed to a lower excited-state injection yield.

The nature of the ligand is an important aspect of controlling the structure and reactivity in coordination chemistry. In connection with our study of heme-copper-oxygen reactivity relevant to cytochrome c oxidase dioxygen-reduction chemistry, we compare the molecular and electronic structures of two high-spin heme-peroxo-copper [Fe(III)O(2)(2-)Cu(II)](+) complexes containing N(4) tetradentate (1) or N(3) tridentate (2) copper ligands. Combining previously reported and new resonance Raman and EXAFS data coupled to density functional theory calculations, we report a geometric structure and more complete electronic description of the high-spin heme-peroxo-copper complexes 1 and 2, which establish mu-(O(2)(2-)) side-on to the Fe(III) and end-on to Cu(II) (mu-eta(2):eta(1)) binding for the complex 1 but side-on/side-on (mu-eta(2):eta(2)) mu-peroxo coordination for the complex 2. We also compare and summarize the differences and similarities of these two complexes in their reactivity toward CO, PPh(3), acid, and phenols. The comparison of a new X-ray structure of mu-oxo complex 2a with the previously reported 1a X-ray structure, two thermal decomposition products respectively of 2 and 1, reveals a considerable difference in the Fe-O-Cu angle between the two mu-oxo complexes ( angleFe-O-Cu = 178.2 degrees in 1a and angleFe-O-Cu = 149.5 degrees in 2a). The reaction of 2 with 1 equiv of an exogenous nitrogen-donor axial base leads to the formation of a distinctive low-temperature-stable, low-spin heme-dioxygen-copper complex (2b), but under the same conditions, the addition of an axial base to 1 leads to the dissociation of the heme-peroxo-copper assembly and the release of O(2). 2b reacts with phenols performing H-atom (e(-) + H(+)) abstraction resulting in O-O bond cleavage and the formation of high-valent ferryl [Fe(IV)=O] complex (2c). The nature of 2c was confirmed by a comparison of its spectroscopic features and reactivity with those of an independently prepared ferryl complex. The phenoxyl radical generated by the H-atom abstraction was either (1) directly detected by electron paramagnetic resonance spectroscopy using phenols that produce stable radicals or (2) indirectly detected by the coupling product of two phenoxyl radicals.

The interactions of nitrogen monoxide (*NO; nitric oxide) with transition metal centers continue to be of great interest, in part due to their importance in biochemical processes. Here, we describe *NO((g)) reductive coupling chemistry of possible relevance to that process (i.e., nitric oxide reductase (NOR) biochemistry), which occurs at the heme/Cu active site of cytochrome c oxidases (CcOs). In this report, heme/Cu/*NO((g)) activity is studied using 1:1 ratios of heme and copper complex components, (F(8))Fe (F(8) = tetrakis(2,6-difluorophenyl)porphyrinate(2-)) and [(tmpa)Cu(I)(MeCN)](+) (TMPA = tris(2-pyridylmethyl)amine). The starting point for heme chemistry is the mononitrosyl complex (F(8))Fe(NO) (lambda(max) = 399 (Soret), 541 nm in acetone). Variable-temperature (1)H and (2)H NMR spectra reveal a broad peak at delta = 6.05 ppm (pyrrole) at room temperature (RT), which gives rise to asymmetrically split pyrrole peaks at 9.12 and 8.54 ppm at -80 degrees C. A new heme dinitrosyl species, (F(8))Fe(NO)(2), obtained by bubbling (F(8))Fe(NO) with *NO((g)) at -80 degrees C, could be reversibly formed, as monitored by UV-vis (lambda(max) = 426 (Soret), 538 nm in acetone), EPR (silent), and NMR spectroscopies; that is, the mono-NO complex was regenerated upon warming to RT. (F(8))Fe(NO)(2) reacts with [(tmpa)Cu(I)(MeCN)](+) and 2 equiv of acid to give [(F(8))Fe(III)](+), [(tmpa)Cu(II)(solvent)](2+), and N(2)O((g)), fitting the stoichiometric *NO((g)) reductive coupling reaction: 2*NO((g)) + Fe(II) + Cu(I) + 2H(+) --N(2)O((g)) + Fe(III) + Cu(II) + H(2)O, equivalent to one enzyme turnover. Control reaction chemistry shows that both iron and copper centers are required for the NOR-type chemistry observed and that, if acid is not present, half the *NO is trapped as a (F(8))Fe(NO) complex, while the remaining nitrogen monoxide undergoes copper complex promoted disproportionation chemistry. As part of this study, [(F(8))Fe(III)]SbF(6) was synthesized and characterized by X-ray crystallography, along with EPR (77 K: g = 5.84 and 6.12 in CH(2)Cl(2) and THF, respectively) and variable-temperature NMR spectroscopies. These structural and physical properties suggest that at RT this complex consists of an admixture of high and intermediate spin states.

A substantial oxidative N-debenzylation reaction along with PhCHO formation occurs from a hydroperoxo-copper(II) complex that has a dibenzylamino substrate (N(CH 2Ph) 2 appended as a substituent on one pyridyl group of its tripodal tetradentate TMPA (also TPA, (2-pyridylmethyl)amine)) ligand framework. During the course of the (L (N(CH 2 ) (Ph) 2 ))Cu (II)( (-)OOH) reactivity, the formation of a substrate and a (-)OOH-derived (an oxygen atom) alkoxo Cu (II)( (-)OR) complex occurs. The observation that the same Cu (II)( (-)OR) species occurs from Cu (Iota)/PhIO chemistry suggests the possibility that a copper-oxo (cupryl) reactive intermediate forms during the alkoxo species formation; new ESI-MS data provide further support for this high-valent intermediate. A net H atom abstraction chemistry is proposed on the basis of the kinetic isotope effect studies provided here and the previously published study for a closely related Cu (II)( (-)OOH) species incorporating dimethylamine (N(CH 3) 2) as the internal substrate; the Cu (Iota)/PhIO reactivity with similar isotope effect results provides further support. The reactivity of these chemical systems closely resembles the proposed oxidative N-dealkylation mechanisms that are effected by the copper monooxygenases, dopamine beta-monooxygenase (DbetaM) and peptidylglycine- alpha-hydroxylating monooxygenase (PHM).

The preference for the formation of a particular Cu 2O 2 isomer coming from (ligand)-Cu (I)/O 2 reactivity can be regulated with the steric demands of a TMPA (tris(2-pyridylmethyl)amine) derived ligand possessing 6-pyridyl substituents on one of the three donor groups of the tripodal tetradentate ligand. When this substituent is an -XHR group (X = N or C) the traditional Cu (I)/O 2 adduct forms a (mu-1,2)peroxodicopper(II) species ( A). However, when the substituent is the slightly bulkier XR 2 moiety {aryl or NR 2 (R not equal H)}, a bis(mu-oxo)dicopper(III) structure ( C) is favored. The reactivity of one of the bis(mu-oxo)dicopper(III) species, [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) (6tbp = (6- (t)Bu-phenyl-2-pyridylmethyl)bis(2-pyridylmethyl)amine), was probed, and for the first time, exogenous toluene or ethylbenzene hydrocarbon oxygenation reactions were observed. Typical monooxygenase chemistry occurred: the benzaldehyde product includes an 18-O atom for toluene/ 7- (1) (8)O 2 reactivity, and a H-atom abstraction by 7-O 2 is apparent from study of its reactions with ArOH substrates, as well as the determination of k H/ k D approximately 7 in the toluene oxygenation (i.e., PhCH 3 vs PhCD 3 substrates). Proposed courses of reaction are presented, including the possible involvement of PhCH 2OO (*) and its subsequent reaction with copper(I) complex, the latter derived from dynamic solution behavior of 7-O 2 . External TMPA ligand exchange for copper in 7-O 2 and O-O bond (re)formation chemistry, along with the ability to protonate 7-O 2 and release of H 2O 2 indicate the presence of an equilibrium between [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) and a (mu-1,2)peroxodicopper(II) form.

In order to contribute to an understanding of the effects of thioether sulfur ligation in copper-O(2) reactivity, the tetradentate ligands L(N3S) (2-ethylthio-N,N-bis(pyridin-2-yl)methylethanamine) and L(N3S')(2-ethylthio-N,N-bis(pyridin-2-yl)ethylethanamine) have been synthesized. Corresponding copper(I) complexes, [CuI(L(N3S))]ClO(4) (1-ClO(4)), [CuI(L(N3S))]B(C(6)F(5))(4) (1-B(C(6)F(5))(4)), and [CuI(L(N3S'))]ClO(4) (2), were generated, and their redox properties, CO binding, and O(2)-reactivity were compared to the situation with analogous compounds having all nitrogen donor ligands, [CuI(TMPA)(MeCN)](+) and [Cu(I)(PMAP)](+) (TMPA = tris(2-pyridylmethyl)amine; PMAP = bis[2-(2-pyridyl)ethyl]-(2-pyridyl)methylamine). X-ray structures of 1-B(C(6)F(5))(4), a dimer, and copper(II) complex [Cu(II)(L(N3S))(MeOH)](ClO(4))(2) (3) were obtained; the latter possesses axial thioether coordination. At low temperature in CH(2)Cl(2), acetone, or 2-methyltetrahydrofuran (MeTHF), 1 reacts with O(2) and generates an adduct formulated as an end-on peroxodicopper(II) complex [{Cu(II)(L(N3S))}(2)(mu-1,2-O(2)(2-))](2+) (4)){lambda(max) = 530 (epsilon approximately 9200 M(-1) cm(-1)) and 605 nm (epsilon approximately 11,800 M(-1) cm(-1))}; the number and relative intensity of LMCT UV-vis bands vary from those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {lambda(max) = 524 nm (epsilon = 11,300 M(-1) cm(-1)) and 615 nm (epsilon = 5800 M(-1) cm(-1))} and are ascribed to electronic structure variation due to coordination geometry changes with the L(N3S) ligand. Resonance Raman spectroscopy confirms the end-on peroxo-formulation {nu(O-O) = 817 cm(-1) (16-18O(2) Delta = 46 cm(-1)) and nu(Cu-O) = 545 cm(-1) (16-18O(2) Delta = 26 cm(-1)); these values are lower in energy than those for [{Cu(II)(TMPA)}(2)(O(2)(2-))](2+) {nu(Cu-O) = 561 cm(-1) and nu(O-O) = 827 cm(-1)} and can be attributed to less electron density donation from the peroxide pi* orbitals to the Cu(II) ion. Complex 4 is the first copper-dioxygen adduct with thioether ligation; direct evidence comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 Angstrom}. Following a [Cu(I)(L(N3S))](+)/O(2) reaction and warming, the L(N3S) thioether ligand is oxidized to the sulfoxide in a reaction modeling copper monooxygenase activity. By contrast, 2 is unreactive toward dioxygen probably due to its significantly increased Cu(II)/Cu(I) redox potential, an effect of ligand chelate ring size (in comparison to 1). Discussion of the relevance of the chemistry to copper enzyme O(2)-activation, and situations of biological stress involving methionine oxidation, is provided.

A systematic investigation of the factors governing the reaction product composition, hydrogen bonding, and symmetry was conducted in the MoO3/3-aminoquinuclidine/H2O system. Composition space analysis was performed through 36 individual reactions under mild hydrothermal conditions using racemic 3-aminoquinuclidine. Single crystals of three new compounds, [C7H16N2][Mo3O10] x H2O, [C7H16N2]2[Mo8O26] x H2O, and [C7H16N2]2[Mo8O26] x 4 H2O, were grown. The relative phase stabilities for these products are dependent upon the reactant mole fractions in the initial reaction gel. This phase stability information was used to direct the synthesis of two new noncentrosymmetric compounds, using either (S)-(-)-3-aminoquinuclidine dihydrochloride or (R)-(+)-3-aminoquinuclidine dihydrochloride. [(R)-C7H16N2]2[Mo8O26] and [(S)-C7H16N2]2[Mo8O26] both crystallize in the noncentrosymmetric space group P2(1) (No. 4), which has the polar crystal class 2 (C2). The second-harmonic generation activities were measured on sieved powders. The structure-directing properties of the molybdate components in each compound were determined using bond valence sums. The structures of all five compounds were determined using single-crystal X-ray diffraction.

The synthesis of a permanently porous pillared-paddlewheel metal–organic framework (MOF) was achieved through transmetalation of Zn(II) with Ni(II). The MOF can be treated with liquid water, leading to the reversible displacement of 50% of its pillars by water molecules and resulting in a most unusual crystalline and permanently porous structure.

The compounds Ba3FeUS6 and Ba3AgUS6 have been synthesized by the reactions of BaS, U, S, and M (= Fe or Ag) at 1223 K. These two isostructural compounds crystallize in the K4CdCl6 structure type in the trigonal system in space group D3d(6)–R3c. Both structures feature infinite ∞(1)[MUS6(6–)] chains along c that are separated by Ba atoms. The ∞(1)[FeUS6(6–)] chains are formed by the face-sharing of US6 trigonal prisms with FeS6 octahedra; in contrast, the ∞(1)[AgUS6(6–)] chains are formed by the face-sharing of US6 octahedra with AgS6 trigonal prisms. The Ba3FeUS6 compound charge balances with 3 Ba(2+), 1 Fe(2+), 1 U4+, and 6 S(2–), whereas Ba3AgUS6 charge balances with 3 Ba(2+), 1 Ag(1+), 1 U(5+), and 6 S(2–). This structure offers a remarkable flexibility in terms of the oxidation state of the incorporated uranium depending on the oxidation state of the d-block metal. DFT calculations performed with the HSE functional have led to band gaps of 2.3 and 2.2 eV for Ba3FeUS6 and Ba3AgUS6, respectively. From resistivity measurements, the Arrhenius activation energies are 0.12(1) and 0.43(1) eV for Ba3FeUS6 and Ba3AgUS6, respectively.

A new strut containing an imidazolium tetracarboxylic acid core has been successfully incorporated into a microporous material using paddlewheel-coordinated copper(II) ions as nodes. Sorption studies conducted on this permanently microporous material imply that it can separate carbon dioxide from methane with high selectivity.

Single crystals of a new beta-octamolybdate salt containing protonated 1,4-diazabicyclo[2.2.2]octane cations were prepared under mild hydrothermal conditions. This compound, [C6H13N2]2[C6H14N2][Mo8O26], was then used as a starting material in the synthesis of [C6H13N2]6[Mo16O53F2].4H2O, which contains previously unreported [Mo16O53F2]12- anions. The structure-directing properties of gamma-[Mo8O26]4-, a likely intermediate in this pH-dependent transformation, are responsible for the site selection of the fluoride incorporation. [Mo16O53F2]12-, the largest reported polyoxofluoromolybdate cluster, expands upon the limited number of such anions in the literature. The structures of both compounds were determined using single-crystal X-ray diffraction.

Air-stable, heteroligated platinum(II) weak-link approach (WLA) tweezer and triple-layer complexes that possess P,X-Aryl hemilabile ligands (P^ = Ph2PCH2CH2-, X = chalcoethers or amines) have been synthesized via the halide-induced ligand rearrangement (HILR) reaction, using a one-pot, partial chloride-abstraction method. The approach is general and works with a variety of phosphine-based hemilabile ligands; when a P,S-Ph ligand is used as the relatively strongly chelating ligand, heteroligated complexes are formed cleanly when an ether- (P,O-Ph), amine- (P,N-Ph2), or fluorinated thioether-based (P,S-C6F4H) hemilabile ligand is used as the weakly chelating counterpart. The HILR reaction has also been used to synthesize bisplatinum(II) macrocycles free of oligomeric material without having to resort to the high-dilution conditions typical for macrocycle synthesis. This approach is complementary to the traditional WLA to the synthesis of macrocyclic complexes which typically proceeds via fully closed, chloride-free intermediates. The structures of the complexes may be toggled between semiopen (with only one chelating ligand) and fully closed (with both ligands chelating) via the abstraction and addition of chloride.

Recent work in the preparation of organically templated metal sulfates under hydrothermal conditions has been extended to include the sulfation of alpha-molybdena through the synthesis of [C(5)H(14)N(2)][(MoO(3))(3)(SO(4))].H(2)O. Single crystals were grown under hydrothermal conditions from molybdenum oxide, water, sulfuric acid, and an enantiomerically pure (R)-2-methylpiperazine source and characterized using both single-crystal X-ray diffraction and infrared spectroscopy. One-dimensional [(MoO(3))(3)(SO(4))](n)(2n-) chains, based on a neutral alpha-molybdena backbone, are connected through an extensive hydrogen-bonding network containing [C(5)H(14)N(2)](2+) cations and occluded water molecules. The direction of the hydrogen bonding is primarily dictated by the nucleophilicity of the respective oxide ligands, as determined using bond valence sums.

An ambidentate dicarboxylic acid bipyridine ligand, (4,5-diazafluoren-9-ylidene) malonic acid (dfm), was synthesized for coordination to Ru(II) and mesoporous nanocrystalline (anatase) TiO(2) thin films. The dfm ligand provides a conjugated pathway from the pyridyl rings to the carbonyl carbons of the carboxylic acid groups. X-ray crystal structures of [Ru(bpy)(2)(dfm)]Cl(2) and the corresponding diethyl ester compound, [Ru(bpy)(2)(defm)](PF(6))(2), were obtained. The compounds displayed intense metal-to-ligand charge transfer (MLCT) absorption bands in the visible region (ε11,000 M(-1) cm(-1) for [Ru(bpy)(2)(dfm)](PF(6))(2) in acetonitrile). Significant room temperature photoluminescence, PL, was absent in CH(3)CN but was observed at 77 K in a 4:1 EtOH:MeOH (v:v) glass. Cyclic voltammetry measurements revealed quasi-reversible Ru(III/II) electrochemistry. Ligand reductions were quasi-reversible for the diethyl ester compound [Ru(bpy)(2)(defm)](2+), but were irreversible for [Ru(bpy)(2)(dfm)](2+). Both compounds were anchored to TiO(2) thin films by overnight reactions in CH(3)CN to yield saturation surface coverages of 3 × 10(-8) mol/cm(2). Attenuated total reflection infrared measurements revealed that the [Ru(bpy)(2)(dfm)](2+) compound was present in the deprotonated carboxylate form when anchored to the TiO(2) surface. The MLCT excited states of both compounds injected electrons into TiO(2) with quantum yields of 0.70 in 0.1 M LiClO(4) CH(3)CN. Micro- to milli-second charge recombination yielded ground state products. In regenerative solar cells with 0.5 M LiI/0.05 M I(2) in CH(3)CN, the Ru(bpy)(2)(dfm)/TiO(2) displayed incident photon-to-current efficiencies of 0.7 at the absorption maximum. Under the same conditions, the diethylester compound was found to rapidly desorb from the TiO(2) surface.

From a combination of chiral Mn(salen) struts and the tetratopic ligand tetrakis(4-carboxyphenyl)benzene, a large-pore, noncatenated metal-organic framework (MOF) material, MnSO-MOF, has been synthesized. Following solvent exchange with hydrophobic CHCl(3), treatment of MnSO-MOF with aqueous H(2)O(2) allowed for the selective demetalation of Mn(salen) struts at and near the surface of the crystals. The resulting crystals displayed greatly enhanced size-selective catalysis compared to the as-synthesized material. Handling of the mechanically fragile MnSO-MOF crystals was greatly facilitated by activation with supercritical CO(2).

Two new noncentrosymmetric polar gallium fluorophosphates have been synthesized under mild hydrothermal conditions through the use of enantiomorphically pure sources of either R-2-methylpiperazine or S-2-methylpiperazine. A centrosymmetric analogue was also prepared using a racemic source of the amine. Novel [Ga(3)F(PO(4))(4)](n)(4n-) layers, constructed from [Ga(3)O(3)F(PO(4))(4)] building units, are observed in all three compounds. The use of racemic 2-methylpiperazine results in crystallographic disorder of the amines and creation of inversion centers, while using a single enantiomer destroys the inversion symmetry and orders the amines. Second harmonic generation measurements were performed on [(R)-C(5)H(14)N(2)](2)[Ga(3)F(PO(4))(4)] x 5.5 H(2)O and [(S)-C(5)H(14)N(2)](2)[Ga(3)F(PO(4))(4)] x 4.75 H(2)O, both of which display type 1 phase-matching capabilities and exhibit activities of approximately 50 x alpha-SiO(2). The structures of these compounds were determined using single crystal X-ray diffraction, infrared spectroscopy, and thermal analyses. [C(5)H(14)N(2)](2)[Ga(3)F(PO(4))(4)] x 5.25 H(2)O, a = 13.0863(5) A, c = 9.9023(4) A, trigonal, P-3 (No. 147), Z = 2; [(R)-C(5)H(14)N(2)](2)[Ga(3)F(PO(4))(4)] x 5.5 H(2)O, a = 13.0887(2) A, c = 29.9439(4) A, trigonal, P3(1) (No. 144), Z = 6; [(S)-C(5)H(14)N(2)](2)[Ga(3)F(PO(4))(4)] x 4.75 H(2)O, a = 13.0871(2) A, c = 29.8350(6) A, trigonal, P3(2) (No. 145), Z = 6.

The use of second-order Jahn-Teller active Mo (VI) centers and chiral organic amines is discussed as an approach to crystallographic noncentrosymmetry. Several series of reactions, conducted under mild hydrothermal conditions, were designed to probe important reaction variables. Correlations between reagent and solvent concentrations and the molybdate structure were investigated using composition space analysis, which allows for the isolation of specific reaction variables. The effects of amine structure variation were probed using multiple series of related amines, which consisted of either linear diamines or ethylenediamine derivatives. The addition of fluoride results in the loss of amine-based structural variations. Chiral organic amines were used to demonstrate the viability of using such components to control the three-dimensional symmetry in new materials. The synthesis, structure, and characterization of eight new organically templated polyoxomolybdates and polyoxofluoromolybdates are reported.

Systematic studies of CO coordination and photodissociation have been carried out for a series of copper(I) carbonyl compounds possessing tripodal tetradentate ligands, [CuI(L)(CO)]B(C6F5)4 (L = Me2N-TMPA (1Me2N), MeO-TMPA (1MeO), H-TMPA (1H), PMEA (2pmea), PMAP (2pmap), BQPA (3bqpa). Detailed structural, electrochemical, and infrared characterization has been accomplished. In addition, various experimental techniques were utilized to determine equilibrium binding constants (KCO), association (kCO), and dissociation (k-CO) rate constants, as well as the thermodynamic (DeltaH degrees , DeltaS degrees ) and activation parameters (DeltaH, DeltaS) that regulate these processes. With increased ligand-electron-donating ability, greater pi back-bonding results in stronger Cu-CO bonds, leading to KCO values on the order 1Me2N-CO1MeO-CO1H-CO. With systematic synthetic expansion of the five-membered chelate rings like 1R to six-membered chelate rings like 2R, the stability of the CO adduct decreases, 1H-CO2pmea-CO2pmap-CO. The CO-binding properties of 3bqpa did not follow trends observed for the other compounds, presumably because of its bulkier ligand framework. Through solid- and solution-state analyses, we concluded that the photolabile carbonyl species in solution possess a tridentate coordination mode, forming strictly five-membered chelate rings to the copper ion with one dangling arm of the tripodal ligand. Carbon monoxide reversibly photodissociated from complexes 1Me2N-CO, 1MeO-CO, 1H-CO, and 3bqpa-CO in coordinating (CH3CN) and weakly coordinating (THF) solvent but not from 2pmea-CO and 2pmap-CO. Comparisons to O2-binding data available for these copper complexes as well as to small molecule (O2, CO, NO) reactions with hemes and copper proteins are discussed.

To model thioether-copper coordination chemistry including oxidative reactivity, such as occurs in the copper monooxygenases peptidylglycine -hydroxylating monooxygenase (PHM) and dopamine beta-hydroxylase (DbetaH), we have synthesized new tridentate N2S ligands LSEP and LSBz [LSEP = methyl(2-phenethylsulfanylpropyl)(2-pyridin-2-ylethyl)amine; LSBz = (2-benzylsulfanylpropyl)methyl(2-pyridin-2-ylethyl)amine)]. Both copper(I) and copper(II) complexes have been prepared, and their respective O2 and H2O2 chemistry has been studied. Under mild conditions, oxygenation of [(LSEP)CuI]+ (1a) and [(LSBz)CuI]+ (2a) leads to ligand sulfoxidation, thus exhibiting copper monooxygenase activity. A copper(II) complex of this sulfoxide ligand product, [(LSOEP)CuII(CH3OH)(OClO3)2], has been structurally characterized, demonstrating Cu-Osulfoxide ligation. The X-ray structure of [(LSEP)CuII(H2O)(OClO3)]+ (1b) and its solution UV-visible spectral properties [S-CuII LMCT band at 365 nm (MeCN solvent); epsilon = 4285 M-1 cm-1] indicate the thioether sulfur atom is bound to the cupric ion in both the solid (CuII-S distance: 2.31 A) and solution states. Reaction of 1b with H2O2 leads to sulfonation via the sulfoxide; excess hydrogen peroxide gives mostly sulfone product. These results may provide some insight into recent reports concerning protein methionine oxidation, showing the potential importance of copper-mediated oxidation processes in certain biological settings.

The variation of ligand para substituents on pyridyl donor groups of tridentate amine copper(I) complexes was carried out in order to probe electronic effects on the equilibrium between mu-eta2:eta2-(side-on)-peroxo [Cu(II)2(O2(2-))]2+ and bis(mu-oxo) [Cu(III)2(O(2-))2] species formed upon reaction with O2. [Cu(I)(R-PYAN)(MeCN)n]B(C6F5)4 (R-PYAN = N-[2-(4-R-pyridin-2-yl)-ethyl]-N,N',N'-trimethyl-propane-1,3-diamine, R = NMe2, OMe, H, and Cl) (1R) vary over a narrow range in their Cu(II)/Cu(I) redox potentials (E(1/2) vs Fe(cp)2(+/0) = -0.40 V for 1(NMe2), -0.38 V for 1(OMe), -0.33 V for 1H, and -0.32 V for 1Cl) and in C-O stretching frequencies of their carbonyl adducts, 1R-CO: nu(C-O) = 2080, 2086, 2088, and 2090 cm(-1) for R = NMe2, OMe, H, and Cl, respectively. However, within this range of electronic properties for 1R, dioxygen reactivity is significantly affected. The reaction of 1Cl or 1H with O2 at -78 degrees C in CH2Cl2 gives UV-vis and resonance Raman spectra indicative of a mu-eta2:eta2-(side-on)-peroxo dicopper(II) adduct (2R). Compound 1(OMe) reacts with O2, yielding equilibrium mixtures of side-on peroxo (2(OMe)) and bis(mu-oxo) (3(OMe)) species. Oxygenation of 1(NMe2) leads to the sole generation of the bis(mu-oxo) dicopper(III) complex (3(NMe2)). A solvent effect was also observed; in acetone or THF, increased ratios of bis(mu-oxo) relative to side-on peroxo complex are observed. Thus, the equilibrium between a dicopper side-on peroxo and bis(mu-oxo) species can be tuned by ligand design-specifically, more electron donating ligands favor the formation of the latter isomer, and the peroxo/bis(mu-oxo) equilibrium can be shifted from one extreme to the other within the same ligand system. Observations concerning the reactivity of the dioxygen adducts 2H and 3(NMe2) toward external substrates are also presented.