Search

So far, a large number of pretreatment methods have garnered significant attention aimed only at optimizing the reducing sugar and bioethanol yields. This study however, carried out pretreatment of sugarcane bagasse (SCB) using hydrothermal, organosolv, alkaline and alkaline peroxide pretreatment methods comparing their process performance. An evaluation of the energy consumption parameter during pretreatment showed lowest energy use (0.619 kWh/kg) during 5% alkaline peroxide pretreatment. The energy efficiency (0.162 kg bioethanol/kWh) was thus highest whereas the waste generation was lowest (38.895 kg waste/kg bioethanol) during alkaline peroxide pretreatment process. The solid biomass was utilized for enzymatic saccharification and bioethanol fermentation using SSF. Maximum enzyme efficiency and bioethanol yields achieved were 85.02% and 0.101 kg bioethanol/kg biomass respectively. Process performance evaluation can be projected to open up a new avenue for practical implementations of life cycle analysis (LCA) and techno-economic assessment aiding the circular bio-economy approach. [Display omitted] • Chemical pretreatment technologies investigated for process performance evaluation. • Energy efficiency and waste generation used to evaluate process performance. • 0.162 kg bioethanol/kWh- energy efficiency during alkaline peroxide pretreatment. • Also, lowest waste generation (38.895 kg waste/kg bioethanol) was recorded. • NaOH and H 2 O 2 at 5% (w/w) chemical concentration was most effective pretreatment. [ABSTRACT FROM AUTHOR]

Abstract: The steam pre-treatment with low severity preserves valuable biomass components, and further delignification with alkaline peroxide could improve hydrolysis. A combination of low severity steam pretreatment and alkaline peroxide post-treatment of Lespedeza stalks was investigated. The post-treatment of steam-pretreated Lespedeza stalks with alkaline peroxide significantly increased the cellulose content and changed the structure of the cellulose-rich fractions. A glucose yield of 503.5mgg−1 raw material from enzyme hydrolysis was obtained when the steam-pretreated material (184°C for 4min) was post-treated with 2% hydrogen peroxide at 60°C for 24h with a substrate concentration of 3.3%. Its hydrolysis yield is 88.8%, which is higher than that of samples processed by steam pretreatment alone (63.7%). The samples obtained by post-treatment with alkaline peroxide were found to have a smoother surface and looser structure in scanning electron microscopy images. The isolated lignin preparations had a yield range from 10.9 to 14.7 (% dry matter). The lignin was characterized by thermogravimetric analysis/differential thermal analysis, Fourier transform infrared spectroscopy, and gel permeation chromatography. Alkaline peroxide treatment increased the thermal stability of lignin, and decreased the amounts of all functional groups. Depolymerization and repolymerization occurred during the alkaline peroxide treatment. [Copyright &y& Elsevier]