Search

Capacitive high‐voltage bushing is one of the typical oil‐immersed paper insulation equipment, which is an indispensable external connection component for power transformers. In order to evaluate the effectiveness of frequency domain spectroscopy (FDS) for diagnosing moisture content of oil‐immersed paper insulation bushing, this article studied the frequency‐domain dielectric characteristics of oil‐immersed paper insulation samples and field bushing. At the same time, the basic principle of interfacial polarisation is used to analyse the samples and field bushing with non‐uniform moisture content. The results show that the moisture content affects the whole frequency band of the FDS curve. When the distribution of moisture content is non‐uniform, the paper with high moisture content has a great influence on the whole FDS curve of oil‐immersed paper insulation. In addition, the FDS curves will show a significant loss peak. The frequency of the peak point gradually moves towards the high frequency as the non‐uniformity of the moisture content distribution increases. The experimental results show that the variation law of oil‐immersed paper insulation can be used to quantitatively evaluate the moisture content and moisture type of oil–paper insulation power equipment. [ABSTRACT FROM AUTHOR]

Accurate estimation of paper‐moisture in transformer insulation is necessary for ensuring their satisfactory operation. Paper‐moisture in transformer insulation can be estimated from their corresponding transfer function zero obtained from insulation model that is parameterised using polarisation depolarisation current data. However, paper‐moisture estimated using transfer function zero is less reliable for a new unit. Considering the fact, a method is proposed in this work that can estimate the paper‐moisture with greater accuracy. Instead of using only transfer function zero, tanδ has also been employed for estimating the paper‐moisture. In order to investigate the effectiveness, the proposed technique has first been applied on several test samples in the laboratory. The proposed technique is then applied on few power transformers to estimate their paper‐moisture. Results obtained from the experiment show that this technique can estimate the paper‐moisture content within test samples and power transformer insulation with better accuracy. [ABSTRACT FROM AUTHOR]

Frequency‐domain spectroscopy (FDS) is a widely accepted method for the estimation of moisture content in oil–paper insulation of power transformer. Researchers have shown that measurement temperature is an important factor that not only shifts the tan δ curve both horizontally and vertically with respect to frequency axis but also affects the value of paper‐moisture content of transformer insulation. This implies FDS data measured at different temperatures yields different results even if the insulation under consideration remains more or less unaffected. Availability and construction of master curve for in‐service real‐life units might not always be available. This study proposes a method that is capable of predicting the profile of tan δ curve at different measurement temperatures. Existing expressions available for predicting paper‐moisture does not consider the effect of change in measurement temperature. This study also proposes modification of existing expression to predict the moisture content of insulation paper at any measurement temperature. In addition, this study outlines a method to evaluate the value of activation energy (Ea) from the insulation response. The discussed technique is first tested successfully on data recorded from a laboratory sample. Thereafter, the method is applied on data collected from a real‐life power transformer. [ABSTRACT FROM AUTHOR]

Increased moisture content within an oil‐paper insulation system can significantly reduce its life expectancy, and for oil impregnated paper condenser type bushings, it is the most common cause of failure. Distinction between moisture contents using traditional power frequency tests of dissipation factor and capacitance can be difficult, particularly at ambient temperatures. Dielectric frequency response is becoming an established technique to measure the dissipation factor and capacitance of a bushing, but to date an accurate model to evaluate the condenser moisture content has not been presented using this technique. In this study, a dielectric frequency response bushing model is proposed and finite element method software is used to simulate the variation in dissipation factor and capacitance of a bushing with varying moisture content, as a function of frequency and temperature. The modelled results are compared with measurements reported in the literature and from the authors' own field measurements, where a good agreement is demonstrated. It is shown that the distinction in dissipation factor between moisture contents at frequencies <0.1 Hz is in excess of ten times greater than at 50 Hz. The proposed model can be used by practitioners to evaluate moisture content within the condenser insulation and distinguish between moisture contents ranging from 0.2 to 4.0%. [ABSTRACT FROM AUTHOR]