Search

The use of WiFi signals for sensing purposes has attracted a lot of interest from both the radar and communications communities and several techniques have been explored. In the attempt of meeting the requirements for small sensor size, compactness, and easy deployment, the authors consider reference‐free approaches, namely approaches that do not require a good copy of the transmitted waveform to be available at the radar receiver. To this end, the authors first resort to a passive radar‐based processing scheme that only exploits the invariant a priori known initial portion of the physical layer protocol data unit, that is, the PHY Preamble, and its limitations in practical applications is investigated. Specifically, the authors show that, with this approach, an accurate time, phase, and frequency synchronization is essential and a possible strategy is investigated. As an alternative solution the authors consider a forward scatter radar‐based approach where only the amplitude modulation of the received signal is exploited to detect the presence of a moving target thus avoiding the need to know the transmitted signal. For the first time, the authors comparatively investigate advantages and drawbacks of the two reference‐free approaches and present practical strategies to handle the limitations observed. The results are reported for experimental tests with people and drones using WiFi transmissions in the 2.4 and 5 GHz band. [ABSTRACT FROM AUTHOR]

Recently, several constellations of broadband low‐Earth orbit communication satellites, such as Starlink or OneWeb, have started to be deployed to provide global internet access. Based on performed analyses, these emerging constellations are considered promising candidates as space‐based transmitters of opportunity for passive radar applications due to their advantageous characteristics in terms of global coverage, high bandwidth (i.e. better resolution), high received power on Earth surface (i.e. increased maximum range), predictable trajectory, and network density and robustness. However, they also pose certain challenges for the development of passive radar systems due to the necessity to track the satellites with a narrow beam reference antenna, their fast‐relative dynamics which induce range and Doppler migration, and the use of non‐standardised signals with little publicly available information, which in addition are not optimised for radar usage. In this article, these capabilities and challenges are analysed, putting a special focus on the estimation of the achievable performance and on the experimental characterisation of the transmitted signals. To this end, the proposed passive radar architectures and the first developed prototypes are also presented. Showing the potential capabilities of these emerging illuminators of opportunity, the authors aim to promote further development of this technology for multiple applications. [ABSTRACT FROM AUTHOR]

This article puts forward a ship target detection and localisation technique for GNSS‐based passive multistatic radar. The approach capitalises on the large spatial diversity offered by navigation satellite constellations to provide maritime awareness using short integration time windows, thus bypassing the shortcomings suffered by approaches relying on long dwells typically considered in satellite‐based passive radar systems. The proposed approach entirely operates on the Cartesian plane and it is able to provide in a single stage the detection and localisation of the target in the surveyed area. Theoretical and simulated performance analysis are provided to illustrate as the proposed approach can outperform conventional two‐stages (i.e. bistatic detection then localisation) procedures, with particular regard to the case of significant radar cross section scintillation, likely experienced in the system under consideration. The effectiveness of the approach has been verified via experimental data acquired in a few scenarios of interest comprising opportunistic targets belonging to different types. [ABSTRACT FROM AUTHOR]

This study presents a novel method for time–frequency (TF) signal analysis and chirp rate estimation dedicated for electromagnetic spectrum sensing, electronic warfare, electronic intelligence and/or passive bistatic radar purposes in which frequency modulated signals occur. The approach is based on the double‐adaptive chirplet transform, providing optimal analysis window parameters, which is a crucial problem during TF processing. The presented methodology is based on a Gaussian window with two degrees of freedom, which results in a strong concentration of energy on the TF plane around the main component, even if the initial window parameters were mismatched. As an example of the method's usefulness, different types of real‐life radar pulses were processed: firstly, two types of non‐linear frequency‐modulated waveforms were examined as a suitable illustration of the changeability of the analysis window parameters. Secondly, the linear frequency modulated signals were analysed in the presence of strong interference and multipath propagation. The waveforms were processed and compared, creating individual radar signatures, which may allow transmitter classification and signal reconstruction to be carried out in further processing. Moreover, the estimation limitations were compared to the Cramer‐Rao lower bound, and an appendix organising mathematical fundamentals for the analysed methods is provided. [ABSTRACT FROM AUTHOR]