Search

The application and uses of drones in all areas are continuously rising, especially in civilian use cases. This increasing threat requires reliable drone surveillance in urban environments. Radar is the obvious candidate with its ability to detect small objects at range, in all weather conditions. The use of an L‐band networked radar for urban sensing of S‐UAS targets is explored. Small echoes from S‐UAS places a premium on synchronisation, which is the fundamental key for high performance networked radar. The effect of timing errors on the operation of the network radar is investigated theoretically and experimentally, and the processing tools for synchronising data based on the direct signal returns of the transmitter are developed. Also, drone detection using bistatic L‐band staring radar is achieved both in simulation and then in real field trials where the SNR and detection performance are computed and analysed. The updated direct signal synchronisation method for bistatic staring radar is shown to provide comparable SNR and positional accuracy for S‐UAS targets as the monostatic staring radar. [ABSTRACT FROM AUTHOR]

The use of WiFi signals for sensing purposes has attracted a lot of interest from both the radar and communications communities and several techniques have been explored. In the attempt of meeting the requirements for small sensor size, compactness, and easy deployment, the authors consider reference‐free approaches, namely approaches that do not require a good copy of the transmitted waveform to be available at the radar receiver. To this end, the authors first resort to a passive radar‐based processing scheme that only exploits the invariant a priori known initial portion of the physical layer protocol data unit, that is, the PHY Preamble, and its limitations in practical applications is investigated. Specifically, the authors show that, with this approach, an accurate time, phase, and frequency synchronization is essential and a possible strategy is investigated. As an alternative solution the authors consider a forward scatter radar‐based approach where only the amplitude modulation of the received signal is exploited to detect the presence of a moving target thus avoiding the need to know the transmitted signal. For the first time, the authors comparatively investigate advantages and drawbacks of the two reference‐free approaches and present practical strategies to handle the limitations observed. The results are reported for experimental tests with people and drones using WiFi transmissions in the 2.4 and 5 GHz band. [ABSTRACT FROM AUTHOR]

The paper focuses on the results of experimental research on the possibility of passive space object detection using a single radio telescope from the European Low‐Frequency Array (LOFAR) network of astronomical radio telescopes. Commercial digital television (DVB‐T) transmitters were used as illuminators of opportunity in this radar system. In the conducted experiments, one LOFAR radio telescope served both as a surveillance receiver and reference receiver in a passive radar system. The greater part of the LOFAR telescope array was used to observe a space object, while a small part of the array was directed towards the illuminator of opportunity to record the reference signal. One of the most important problems to overcome with utilising the LOFAR radio telescope in such a solution was the effective suppression of the direct‐path component in a surveillance signal coming from the illuminator of opportunity, which was relatively close to the LOFAR radio telescope. The results regarding the passive detection of the International Space Station, included in the paper, confirm the possibility of observing the space object flying in Low‐Earth Orbit using the LOFAR telescope or another receiving system with a similar antenna array. [ABSTRACT FROM AUTHOR]

This paper proposes a simple non‐adaptive approach for the suppression of direct signal and clutter contributions in a passive radar system based on orthogonal frequency division multiplexing transmissions, exploiting the properties of a reciprocal filter (RF). The use of a RF allows to circumvent the limits posed by the waveform ambiguity function, producing a data‐independent time‐invariant response to a stationary point‐like target echo at the output of the range compression stage. This feature enables simple clutter cancellation strategies, based on the subtraction of delayed portions of the surveillance signal, according to the conventional moving target indication methodologies. The proposed processing scheme consists of a range compression stage based on a RF, followed by a Single Canceller. Its performance is investigated against a simulated and an experimental data set, for the case of a digital video broadcasting‐terrestial‐based passive radar scenario, and it is compared to an alternative scheme based on a conventional matched filter and adaptive cancellation techniques. The proposed approach is shown to yield a perfect cancellation of the clutter returns from a stationary scene under ideal conditions. Moreover, it proves to be robust to real‐world conditions, despite its considerably limited computational load compared to adaptive clutter cancellation techniques. [ABSTRACT FROM AUTHOR]

In this study, an anti‐deception jamming target tracking algorithm based on the data‐level fusion is proposed in a distributed radar network. First, the consensus covariance intersection (CCI) algorithm is proposed to improve tracking performance by introducing the consensus theory to the field of covariance intersection fusion. Second, unscented Kalman filter is utilised to implement the preprocessing of distributed filtering. Then, two distributed target discrimination schemes are developed for non‐collaborative and collaborative false targets respectively. For non‐collaborative false targets, according to the characteristics that estimated spatial locations of the false target from different radars are relatively scattered, a false target elimination method based on nearest neighbour algorithm is proposed. For collaborative false targets, after equipped with passive radars that are less vulnerable to interference, the consensus algorithm is introduced to convey the real target information to the unconnected active radars, thus achieving an effect of global anti‐deception jamming. Finally, the CCI algorithm is deployed for distributed fusion of physical target tracking, so as to improve the overall estimation performance. [ABSTRACT FROM AUTHOR]

Passive radar systems use illuminators of opportunity to illuminate targets instead of dedicated radar transmitters. The signals of opportunity have lower bandwidth than dedicated active radar systems, leading to poor downrange resolution. Multiple signals of opportunity can be coherently combined to increase the overall bandwidth of the system, and therefore create finer resolution images. These signals are usually separated in the frequency domain (non‐contiguous), which causes large unwanted grating lobe artefacts in the image when using back‐projection or Fourier transform based imaging. Additionally, these signals may originate from transmitters not located at the same position. A calibration method is developed to align the downrange responses and coherently combine the two signals. A compressive sensing‐based algorithm is used to combine the calibrated non‐contiguous frequency data, and is shown to mitigate the grating lobe artefacts that occur when using a back‐projection algorithm. This approach is validated with simulated and experimental data from a passive radar system tracking a commercial airline using two digital television (DTV) broadcast transmitters. [ABSTRACT FROM AUTHOR]

Bistatic airborne radar has excellent performance due to the separate transmitter and receiver, but its clutter distribution is usually non‐stationary, which causes the performance of the traditional Space time adaptive processing (STAP) method to fail. Herein, firstly a bistatic airborne radar clutter signal model established, followed by an analysis of its clutter distribution characteristics in detail, and finally a bistatic airborne radar space–time compensation STAP method based on adaptive segmentation is proposed. The method first uses the distribution characteristics of the peak spectral centre in the first pulse data of the airborne radar to adaptively segment the clutter data, including extremely non‐stationary, severely non‐stationary, and non‐stationary clutter regions. Then the clutter data are compensated based on the estimation value of the space–time peak spectrum centre. Finally, each range section is processed by using STAP, and the detected target Doppler frequency is adaptively moved. Simulation results verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]