Search

A compact bandstop filter (BSF) using parallel-coupled lines and open stubs with four transmission poles (TPs) is proposed. Through theoretical equation deduction, the positions of these four TPs can be obtained. Good roll-off skirts and stopband suppression characteristics of the BSF can be realised with the help of multiple TPs. To improve transition band roll-off rates, another BSF with five TPs is designed, where a short-circuited T-stub is loaded on the middle of the above BSF circuit structure. For demonstration, two filter examples with centre frequencies at 2 and 1.8 GHz are implemented with generation of four and five TPs, respectively, for theoretically calculated certification. Good agreement between simulated and measured results validates the design method. [ABSTRACT FROM AUTHOR]

Antenna arrays with shaped patterns have drawn significant attention for their wide applications in radar, sonar and communication systems. The combination of genetic algorithm (GA) and fast Fourier transform (FFT) has been used to synthesise shaped pattern of antenna array's factor without considering coupling effects. In this work, the GA-FFT method is generalised by integrating with a new virtual active element pattern (AEP) expansion method which approximates each AEP as the radiation pattern by exciting several equally spaced virtual elements surrounding the real element position. The generalised GA-FFT can be applied for the shaped pattern synthesis of unequally spaced linear arrays including mutual coupling and platform effect. Several synthesis examples with different pattern shapes and different antenna structures are given to demonstrate the effectiveness, accuracy and robustness of the proposed method. [ABSTRACT FROM AUTHOR]

A novel short- and open-stub loaded spiral resonator (SOSL-SR) is presented and analysed by the odd- and evenmode method to obtain three controllable resonant modes. Therefore, a triple-mode bandpass filter (BPF) has been designed with good frequency selectivity based on the proposed SOSL-SR. Then, by dividing these three resonant modes into two passbands or stopbands, a dual-band BPF and a dual-band bandstop filter using the proposed SOSL-SR have been demonstrated. Because of the spiral structure, the sizes of these three designed microstrip filters are reduced significantly. Good agreement between simulated and measured results validates the design concept. [ABSTRACT FROM AUTHOR]