Search

The integration of distributed energy resources and smart grid technologies has increased the vulnerability and complexity of modern power systems, especially in the face of extreme events. Enhancing the resilience of power systems is crucial to ensure continuous and reliable electricity supply during and after such events. This paper proposes a preventive framework to enhance the resilience of networked microgrids (NMGs) during extreme events. The framework integrates optimal energy management strategies and preventive resilience enhancement measures, focusing on the coordination and utilization of hydrogen (H2) energy systems and controllable distributed generators (CDGs). The framework leverages capacity‐based signals to prompt H2 system owners and CDG operators to prepare for disruptions by fully charging H2 storage tanks and pre‐scheduling CDG commitments. By utilizing this proactive energy scheduling, critical loads can be supplied through stationary fuel cells and CDGs, improving overall network resilience. The proposed resilient energy management approach combines optimization techniques to improve the resilience of NMGs and reduce their dependence on the main grid. Numerical simulations demonstrate the effectiveness of the proposed linear model in enhancing the resilience of NMGs and improving their operational performance during extreme events. The contributions of this paper include advancements in understanding NMGs, the development of a preventive framework, integration of H2 energy systems and CDGs, and proposal of effective signalling models. [ABSTRACT FROM AUTHOR]

Stability issues can significantly increase the risk of hybrid microgrids (HMGs), particularly during island mode operation. The dynamic performance of the system can induce constraints and stability margins that may elevate the loss of load probability. This paper presents a new stability‐oriented risk assessment model that bridges the conventional reliability models, stability, and system risk. The proposed model ensures the risk of the system by considering the redesign or reconfiguration of HMGs to address stability issues. First, the interlinking converters (ICs) DC‐link voltage stability is analysed to determine the acceptable power flow margins in rectifying and inversion mode. Next, the new general risk assessment model is introduced. The results show that the stability margin significantly increases the risk of the HMG, particularly when considering the aging of converters. The study also examines the impact of various load characteristics and ICs with different numbers but the same total size. In some cases, the risk is acceptable for the desired loads, or it can be reduced to an admissible level by reconfiguring the ICs. Finally, the paper demonstrates the effectiveness of the proposed model in the optimal design of HMGs, aiming to guarantee the system's risk. [ABSTRACT FROM AUTHOR]

Autonomous microgrid is known to lack appropriate inertia and damping for grid stabilization. Due to this, virtual synchronous machine (VISMA) has been introduced to provide necessary ancillary services through control of power converters. In a multi‐VISMA (n‐VISMA) microgrid, relative rotor angle stability of the power system is dependent on the active power balance after small perturbation. Thus, the use of relevant analytical models are essential issues for microgrid stability analysis. This paper presents a comprehensive small‐signal stability analysis to study inherent electromechanical oscillations in the virtual rotors. The subsystems of the microgrid consisting of VISMA, network, load and the outer power control were all modelled in Synchronous Reference Frame. The small‐signal model (SSM) was tested on IEEE‐9 bus system with VISMA replacing electromechanical synchronous machines on the network. To validate the developed numerical analytics, dynamic responses of the SSM are compared with those of the non‐linear (NL) system dynamics and the results reveal that the developed linearized SSM is sufficient to accurately characterize behaviour of the VISMA microgrid when operated in autonomous mode. Eigenvalues analysis and parameter sensitivities of the critical modes were investigated. Oscillatory participations of the VISMAs and steady state stability limit of the microgrid have also been investigated. [ABSTRACT FROM AUTHOR]

A machine learning‐based optimized droop method is suggested here to simultaneously reduce the production cost (PC) and power line losses (PLL) for a class of direct current (DC) microgrids (MGs). Traditionally, a communication‐less technique known as the hybrid droop method has been employed to decrease PC and PLL in DC MGs. However, achieving the desired reduction in either PC or PLL requires arbitrary adjustments of weighting coefficients for each distributed generator in the conventional hybrid droop method. To address this challenge, this paper introduces a systematic approach that capitalizes on the benefits of artificial intelligence to accurately predict both the PC and PLL in a DC MG. Furthermore, an optimization technique relying on the gradient descendent method is employed to independently optimize both PC and PLL for each scenario. The effectiveness of the proposed method is confirmed through a comparative study with classical and hybrid droop coordination schemes under various scenarios such as rapid load changes. [ABSTRACT FROM AUTHOR]

The paper presents a ground fault location algorithm (GFLA) in double‐circuit transmission lines (DCTL) with a T‐off connection to an industrial microgrid (IMG) containing electric arc furnaces (EAF), renewable distributed generations (RDG), and static VAR compensator (SVC). The design presented utilizes the information on the current and voltage phasors of one side of the transmission lines (TL) during the fault period, and there is no need for the availability of information on the type of faulty phase(s) and even the faulty section. To find the exact location of the fault in this design, the voltage phasor equations governing the fault point in positive, negative, and zero‐sequence (PNZS) domains, the zero‐sequence current (ZSC) equation of the fault point, and the boundary condition equation of the fault point have been used. The simulation system is implemented in Simulink/MATLAB using accurate modelling of all network components. The algorithm has been tested and evaluated in different fault conditions, including various locations, phase types, phase‐to‐ground connection resistance, occurrence time, and microgrid (MG) operation modes. The successful results of various tests of the proposed design as well as the analysis of various sensitivities confirm the satisfying performance of the suggested algorithm. [ABSTRACT FROM AUTHOR]

Proper current sharing, DC bus voltage deviation reduction, and SOCs balancing, along with ensuring stability are the vital challenges of DC microgrids control algorithms. Addressing these challenges without communication links and a central controller is one of the priorities of control methods. Motivated by the above mentions, this paper presents a novel communication‐free control method. In this regard, a new parameter called "virtual current" is defined according to the unit current and its SOC. Then using a piecewise droop curve and the droop curve shift technique, the virtual current for each unit is determined. The units control coefficients and the relationship of the virtual current are allocated based on the location and power of the loads and RESs such that in the worst case; 1) SOCs are converged; 2) the DC bus voltage deviation is reduced; and 3) the current is appropriately distributed. The simulation and experimental results confirm that the proposed method can balance SOCs like SOC‐based methods and share power properly like piecewise droop methods while reducing DC bus voltage deviation. [ABSTRACT FROM AUTHOR]

The integration of the renewable energy sources (RESs) into the power grid, drives a significant transformation in the conventional power generation landscape. This transition from traditional synchronous generators to inverter based RESs introduces unique challenges in maintaining the grid frequency stability due to the reduced system inertia. The inherent stochastic nature of the RES power generation, load demand, and grid inertia includes further complexity in the assessment of frequency stability. Existing studies have limitations, including neglecting the stochastic nature of RES generation and load demand fluctuations, relying on limited metrics, and lacking a comprehensive day‐to‐day assessment. To address these shortcomings of the existing approaches, this paper introduces a novel methodology for assessing frequency stability in power grids with high RES penetration. It proposes three indices for evaluating grid frequency sensitivity, resiliency, and permissibility amidst varying RES integration. Utilizing a stochastic approach, the study incorporates uncertainties in RES generation and load demand, offering a comprehensive framework for day‐to‐day frequency stability analysis. Additionally, it presents a systematic method to ascertain the necessary inertial support for maintaining desired frequency reliability in RES‐dominated grids. The effectiveness of these methodologies is validated through a case study on a modified IEEE 39‐bus test system, demonstrating their applicability in ensuring reliable grid operation under high RES scenarios. [ABSTRACT FROM AUTHOR]

Considering the importance of the renewable energy sector in the distribution systems, energy operation, and management which are connected to the distribution network (DN) in the form of multiple microgrids (MMGs) is crucial in reducing cost and pollution. Hence, this paper aims to propose optimal energy management for MMGs in the DN. Different objective functions have been taken into account in this optimization, including network cost, pollution reduction, and distribution network power losses. To design the multi‐objective optimization problem, a fuzzy method has been adopted for simultaneous multi‐objective calculations. Furthermore, the effect of the placement of distributed generations (DGs) and microgrids (MGs) is considered to reduce the distribution network power losses. Information gap decision theory (IGDT) has formulated uncertainties about renewable sources and consumers. To solve this optimization problem, a new method of the modified Harris Hawk optimization (MHHO) algorithm has been implemented, compared with the original HHO and genetic algorithm (GA). Finally, the proposed method has been analysed under the IEEE 33‐bus distribution network for a 24‐hour time horizon, including three MGs considering different renewable energy sources (RESs). The simulation results have demonstrated the high performance of the allocated network with the MHHO algorithm compared to the other scenarios. [ABSTRACT FROM AUTHOR]

In voltage‐controlled voltage source inverters (VSIs)‐based microgrids (MGs), the inner control is of prime interest task for guaranteeing safe and stable operation. In this paper, an in‐depth investigation of the modelling, control design, and analysis of the voltage and current inner control loops intended for single‐phase voltage‐controlled VSIs is established. The main objective of this work is to provide a comprehensive study of the mathematical modelling, control design, and performance evaluation of the inner control's loops considering different proportional‐integral (PI) controller types with and without compensation, and to determine the optimal scheme that can offer better performance in terms of implementation simplicity, robustness, and transient and steady‐state responses. Thus, the mathematical closed‐loop models of designed outer voltage and inner current control schemes based on PI, P, and feedforward controllers with and without compensation are, first, derived. Following this, a systematic and effective control design for tuning the different PI controllers' parameters is proposed. Furthermore, an analysis revealing the performance of the designed voltage and current control schemes is provided. This analysis enables us to choose a P controller and PI feedforward controller for the current control loop and the voltage control loop, respectively. The chosen P and PI controllers should be simple; meanwhile, they should offer a wide bandwidth. A simulation study is carried out in MATLAB/Simulink software to assess the performance of the adopted inner control scheme for both linear and non‐linear loads. In addition, an experimental setup, based on a TMS320F2837xD μC, of a single‐phase VSI supplying linear and non‐linear loads is built to verify the effectiveness and the robustness of the adopted inner controller. The results demonstrated: (1) the necessity of introducing the compensation term, which is responsible for offering control improvement against voltage perturbation, (2) the high tracking performance of the chosen controller in terms of dynamic and steady‐state responses as well as its simplicity of implementation. [ABSTRACT FROM AUTHOR]

The increasing penetration of renewable energy sources and the retirement of conventional generation units have decreased system inertia, making power systems more vulnerable to resilience and stability issues. To address this problem, this paper proposes a novel approach using grid‐supportive loads (GSLs) to provide a fast and concise primary frequency response and a deep deterministic policy gradient agent‐based secondary controller to restore the system frequency to the nominal value. The proposed method is evaluated on the single‐area and multi‐area test systems. The simulation results demonstrate that using GSLs enhances the power system's stability and resilience. Compared to conventional controllers, the frequency nadir is improved with GSLs. Additionally, the proposed method effectively enhances resilience even with high penetration. These findings indicate that the proposed approach can improve the resilience and stability of power systems and provide a promising solution for future power systems. The results of this study underscore the importance of utilizing innovative approaches to enhance the stability and resilience of power systems in the context of high penetration of renewable energy sources and the retirement of conventional generation. [ABSTRACT FROM AUTHOR]

The aggregation of the remaining battery capacity of electric vehicles (EVs) can be used as distributed energy storage to participate in the microgrid optimisation through vehicle‐to‐grid (V2G) technology. However, the reliability of this service to be delivered is affected by the uncertainty of EVs' behaviour. The un‐reliable service will bring risks in the operation of microgrid when EVs' V2G electricity is regarded as an important flexibility resource. This paper, first proposes an analytical method to quantify the reliability of EV aggregation's (EVA's) V2G electricity based on the analysis of historical charging data and compound Poisson process. Based on this model, electric vehicles aggregators can evaluate the V2G bid quantity for any time slot on day t+1 according to the reliability requirements. Secondly, an optimal operation model of microgrid with consideration of V2G's reliability is considered. Finally, a test system with photovoltaics (PVs) and EVA on top of the original IEEE 33‐node system is used to verify the effectiveness of the proposed model. The results show that with the proposed reliability evaluation method of V2G electricity, the optimal operation of the microgrid can be reached with appropriate evaluation of the capability of the EVA. [ABSTRACT FROM AUTHOR]

Distributed energy resources (DERs) provide flexible load restoration strategies, which can effectively enhance the resilience of active distribution systems (ADSs). Whereas, the widespread DERs in ADSs complicates the supply‐demand relationship and make the system resilience difficult to access. Therefore, this paper proposes a simulation‐based resilience assessment algorithm of ADSs considering the microgrid formation based on grid‐edge DERs. Microgrid formation is used to depict the resilience gain of grid‐edge DERs on ADSs. Specifically, a resilience assessment framework for ADSs is firstly proposed, where the uncertainty of component state and supply‐demand is modelled based on probability statistics. Then the mixed integer linear programming is used to search for optimal load restoration strategies with microgrid formation. On this basis, a set of resilience indices are defined to quantitatively analyse the resilience of ADSs, and a resilience assessment algorithm with uncertainty scenario generation is proposed to obtain these indices. Furthermore, extensive numerical results based on a modified IEEE 123‐bus feeder validate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

The high penetration of distributed generation systems poses challenges in effectively managing both DC bus voltage and power‐sharing in DC microgrids (MGs). To ensure precise voltage regulation across various distributed generation systems and maintain overall system stability, this paper studies the modelling and control of an islanded DC MG described by a set of nonlinear‐nonaffine differential equations. In the proposed DC MG, a battery storage, a photovoltaic (PV) power plant, and a back‐end power converter with DC loads have been connected to a common DC bus. First, a dynamic model of a DC MG was developed. Then, to find the maximum power point of solar PV, a straightforward method based on an artificial neural net is employed. Afterward, a nonlinear local state feedback controller through output regulation theory is applied to achieve voltage stability, overcoming the drawbacks of droop‐based techniques. Moreover, partial state feedback capability simplifies controller design. To verify the effectiveness of the proposed approach, various scenarios, including sudden load variation, illumination change, and changes in the MG configuration, have been examined. Finally, numerical studies were carried out in a simulation environment to demonstrate the superiority of the proposed nonlinear control scheme over constant feedback control. [ABSTRACT FROM AUTHOR]

The multi‐microgrids operation can greatly improve the proportion of renewable energy integration and power reliability of rural microgrids through energy trading between adjacent microgrids. Therefore, this paper proposes an optimization method for the low‐carbon economic operation of rural microgrids which contain wind power, photovoltaic, biogas, and other common rural renewable energy sources. Using the asymmetric Nash bargaining model which can form the non‐linear energy mapping function to quantify the bargaining power of each microgrid to establish the multi‐microgrids energy trading model, and the non‐convex trading optimization problem is equivalently transformed into two convex optimization subproblems, subproblem 1 is microgrids alliance costs containing the emission costs, and subproblem 2 is cooperative benefits distribution. Then, the accelerated Alternating Direction Method of Multipliers (ADMM) method is used to solve subproblem 1 and subproblem 2, respectively, and the privacy of transaction information is also protected. The results show that: compared with the single‐microgrid operation, the combined operation of rural multi‐microgrids with biogas can greatly improve the renewable energy consumption rate, reduce carbon emission, and improve the profit income of the alliance and each microgrid. Meanwhile, the accelerated ADMM algorithm used can greatly improve the solution speed. [ABSTRACT FROM AUTHOR]