Search

Residential buildings may use energy storage, flexible loads, and renewable energy sources to reduce energy consumption and increase demand side flexibility. The flexibility of a single building can be coordinated with other facilities in a transactive energy (TE) market to reduce energy costs. In addition, cloud energy storage (CES) has been proposed to provide storage services for residential buildings with more economic benefits than individual energy storage units in recent years. Although the TE market and CES implementation have received much attention in previous works, a suitable structure for CES participation in TE market has not been addressed. Furthermore, previous studies ignored all or some sources of uncertainties in the TE decision making process. This paper presents a stochastic optimization model in a transactive energy framework based on a distributed optimization algorithm for peer‐to‐peer energy trading using the alternating direction method of multipliers in the presence of CES. This paper considers the uncertainties of the inflexible load demand, renewable energy generations, and market prices using an artificial neural network‐based scenario generation and reduction methodology. Numerical results show improvements toward addressing the challenges of the uncertainties while maximizing the CES's owner revenue and minimizing the customers' costs in the proposed model. [ABSTRACT FROM AUTHOR]

In order to solve the collaborative optimization scheduling of multi‐microgrid under the high penetration rate of new energy, this paper considered the energy interaction between micro‐grids in multi‐microgrid and the relationship between new energy consumption and electricity cost, constructed a collaborative scheduling model considering both micro‐grid load and main grid wind and optical energy storage, proposed objective function based on economic cost, and improved Genetic Algorithm (GA). The elite thought and catastrophe thought are used to optimize the selection operation, and the particle swarm optimization algorithm is used to optimize the mutation operation. Furthermore, three scenarios were selected to verify the effectiveness of the proposed model and the improved GA. The results show that the proposed model can ensure the stable operation of the multi‐microgrid system with a high proportion of new energy access and reduce the operation cost. In addition. the improved algorithm solves the problems of easy to fall into local optimum and slow iteration speed, and has better performance in solving the model. [ABSTRACT FROM AUTHOR]

Low and medium speed magnetic levitation traffic with short power supply distance and complex grounding network structure, prone to power supply rail grounding faults. However, the existing fault location methods do not accurately locate the fault point, making it difficult for the protective device to act to cut off the fault. To address the above problems, this paper builds a dynamic simulation model of the low and medium speed magnetic levitation power supply rails to study the distribution characteristics of the fault traveling waves after a ground fault occurs in the power supply rails, and analyses the generation mechanism of the traveling wave spectrum through formula calculation. First, the difference in current between the positive and negative bus bars is analyzed to determine whether a ground fault has occurred. Second, the direction of the current difference between stations is compared to locate the faulty section. Finally, the fault distance is calculated from the frequency difference of the fault voltage at the double‐ended station. Through simulation, the method is validated to be unaffected by fault location, fault transition resistance, noise interference, and is applicable to short circuit faults caused by lightning strikes, and the ranging error always remains within 20 m. The method has strong robustness, can effectively solve the problem of protection misoperation and accurately locate the fault point. It is suitable for low and medium speed magnetic levitation transportation power supply rail ground fault. [ABSTRACT FROM AUTHOR]

This paper introduces a new dynamic wide‐area cooperative protection based on cooperative control of distributed multi‐agent systems and graph theoretical methods. For power system cooperative protection, a new voting method is designed that manages each agent's cooperation according to each protection area. Cooperative protection areas work together and make a wide area of cooperative protection for the specific protection scheme. As the power system configuration varies, the voting management and the wide‐area cooperative protection dynamically change. The proposed protection method decisions are collective, while a centralized master does not exist, and local information is used. A fault detection code and a wide‐area fault detection code are presented for fault detection. The suggested dynamic wide‐area cooperative protection scheme is tested on an IEEE 39‐bus test system. The proposed protection performance is studied as backup protection for distance relays during normal, stable power swings, unstable power swings, and load encroachment conditions. [ABSTRACT FROM AUTHOR]

The protection of traditional high‐voltage capacitor banks relies on an unbalance relay which operates when an internal fuse is blown. However, the unbalance relay cannot indicate the cause of the fault. Thus, an operator wastes time and human resources investigating the fault issues. In this paper, a fault which occurred in a 230‐kV power system of Electricity Generating Authority of Thailand was observed by performing simulations using the Power Systems Computer Aided Design (PSCAD) program. The study system based on the double bus station and 72 MVAR capacitor banks was installed in the form of a back‐to‐back topology. Three scenarios were considered: normal condition, fault occurrence in one capacitor bank and fault occurrence in both capacitor banks. Current characteristics such as the current phase and difference in unbalance current were considered. In addition, discrete wavelet transform was applied to solve the ambiguity of current generated from the PSCAD. The authors' results suggest that identifying fault events using a coefficient of wavelet is more efficient than relying on the current amplitude. The findings mentioned in this paper can be applied in a traditional power system protection scheme to enhance a system's reliability. [ABSTRACT FROM AUTHOR]

Technically, residential energy management systems are fundamental sectors in the smart grids for implementing demand response programs in the layer of households for managing energy consumption and reducing energy bills. The paper proposes a novel energy management scheme that takes production and usage into account based on a heuristic searching operation. In addition to modelling the grid, renewable energy sources, batteries, and electric vehicles, various kinds of electrical and thermal devices have been examined, including air conditioners, water heaters, vacuum cleaners etc. A method is developed for solving the objective constraint issue in a smart home in order to reduce energy consumption and determine feasible operation states among the various loads. Moreover, this paper proposes a grey wolf optimization method for solving the issue over a longer simulation period. Various cases were examined to evaluate the effectiveness of this suggested robust optimization algorithm. The outcomes show that the suggested model could not only reduce energy costs significantly but has also shown good performance for energy management purposes. [ABSTRACT FROM AUTHOR]

This paper proposes a novel primary frequency regulation (PFR) scheme for multi‐infeed high voltage direct current (HVDC) (MIDC) system. First, a dynamic model for frequency response in the MIDC system is carried out to involve line‐commutated‐coveter (LCC)‐HVDCs in frequency regulation. Then, a disturbance observer (DO) is proposed to estimate both the power imbalance and the full order states of the system. By combining a Kalman filter, this DO gets an accurate estimation quickly with local frequency measurement. On the basis of the estimated disturbance and state variables, feedforward control schemes can be concluded to fully utilize the fast adjustability of LCC‐HVDCs. In this paper, a model predictive control based scheme is designed to coordinate LCC‐HVDCs under constraints of HVDC capacity and frequency boundaries. As a result, the optimal power‐sharing property of LCC‐HVDCs is achieved to enhance the PFR dynamic performance of the AC main system. Further, the stability of the proposed method is analysed using the Lyapunov method. Finally, numerical simulations are concluded to verify the effectiveness and the merits of the proposed method, by comparing it to typical droop controls. [ABSTRACT FROM AUTHOR]

With the rapid increase of wind power penetration, the frequency indicators of power system, encompassing frequency deviation and rate of change of frequency (RoCoF), are prone to exceed the pertinent relay thresholds, thus leading to serious power outages. Wind farms can participate in primary frequency regulation (PFR) to alleviate the above problem. However, wind farms reserve capacity (WFRC) presented by overspeed control and pitch angle control is the important factor for frequency safety especially when large disturbance occurs, and it varies obviously in different conditions. Thus, WFRC should be utilized optimally to avoid insufficient or excessive response of wind farms in PFR. To overcome the challenge, this paper proposes frequency‐trajectory‐oriented control (FTOC) for wind farms based on a two‐fold optimization framework, seeking to obtain the best frequency control performances in PFR through realizing the optimal compromise between frequency results and the consumption of WFRC. First, when the frequency indicators deviate significantly from the normal values, the optimal frequency trajectory is planned periodically according to the local standards and operation conditions, thereby minimizing the total consumption of WFRC on the premise of frequency safety. Second, based on model predictive control and a real‐time power system parameters estimator, the total reference power of wind farms, which helps the frequency track the latest planned trajectory, is optimally distributed among wind generators according to their reserve capacity. In this case, through the optimal frequency trajectory planning and tracking, the new method in this paper not only effectively prevents the frequency results from exceeding the local standards under diverse conditions, but also finds the optimal balance among frequency indicators safety, frequency trajectory smoothness, and the reserve capacity consumption of wind power generators. Finally, the simulation results prove the effectiveness and advancement of FTOC. [ABSTRACT FROM AUTHOR]

This paper reviews the applications of Internet of Things (IoT) and digital twin technology in electrical power systems. It begins by discussing the generalized IoT value chain, followed by the terminology of smart grid, with clarifying the role of IoT‐systems and the digital twin structure within the Smart Grid. A comparison between different short‐range and long‐range transports is presented. The paper then discusses the use of IoT and digital twin technology for effective energy management with applications in smart homes, smart buildings, smart grids, smart industries (Industry 4.0), smart transportation and smart cities. Additionally, the paper explores the use of IoT and digital twin technology for condition monitoring and diagnosis (CMD) in electrical power systems. Three different cases are presented for CMD, that is, CMD of power transformers, CMD of electrical grids and CMD of substations. IoT and digital twin applications are also highlighted in power electronic systems. Finally, the paper discusses the challenges and opportunities of applying IoT and digital twin technology to electrical power systems and provides recommendations for future research. [ABSTRACT FROM AUTHOR]

Future distribution networks (DN) are subject to rapid load changes and high penetration of variable distributed energy resources (DER). Due to this, the DN operators face several operational challenges, especially voltage violations. Optimal power flow (OPF)‐based reactive power control (RPC) from the smart converter (SC) is one of the viable solutions to address such violations. However, sufficient communication and monitoring infrastructures are not available for OPF‐based RPC. With the development of the latest information communication technology in SC, cyber‐physical co‐simulation (CPCS) has been extensively used for real‐time monitoring and control. Moreover, deploying OPF‐based RPC using CPCS considering the controller design of SC for a realistic DN is still a big challenge. Hence, this paper aims to mitigate voltage violations by using OPF‐based RPC in a real‐time CPCS framework with multiple SCs in a realistic DN. The OPF‐based RPC is achieved by performing the CPCS framework developed in this study. The CIGRE medium‐voltage DN is considered as a test system. Real‐time optimization and signal processing are achieved by Python‐based programs using a model‐based toolchain of a real‐time DN solver and simulator. Real‐time simulation studies showed that the proposed method is capable of handling uncertain voltage violations in real time. [ABSTRACT FROM AUTHOR]

The impulse performance of grounding electrodes highly depends on soil impulse discharge characteristics. The analysis of soil discharge dynamic process images is helpful to understand the impulse discharge mechanism of grounding electrodes. This paper designed an optical‐electrical synchronous observation platform for simulate soil (SiO2 crystal) discharge, and discharge dynamic process images is obtained by high‐speed camera. Through analysing breakdown delay time and thermal power before breakdown, it is found that soil impulse discharge is mainly an electrical breakdown process, and soil ionization intensity is positively correlated with the light intensity emitted by whole soil sample in breakdown channel development stage. The time from voltage application to the occurrence of ionization is defined as initial ionization delay time (IIDT). Using image processing technology, the change curve of optical image average grayscale value with time in the process of soil discharge is obtained, and a calculation method of IIDT is proposed by comparing the difference between average grayscale value curve and background image average grayscale value. Experiment results show that IIDT is negatively correlated with impulse voltage, particle size and water content, but not with salt content. [ABSTRACT FROM AUTHOR]

An editorial is presented on future distribution grids and integrated energy systems (IES). Topics include distributed energy resources (DERs) such as wind, solar, energy storage, combined heat and power plants, electric vehicles, and smart loads; and taking into account long-term uncertainties in natural gas prices and electric and natural gas demands through scenario realizations.

High energy consumption around the world and concerns over climate change and high greenhouse gas emissions have led to a significant increase in using renewable energy resources, particularly wind power plants. In spite of using small wind farms in distribution networks as distributed generation, the interest in employing large‐scale wind farms in transmission levels has grown significantly in recent years. The presence of large‐scale wind farms with a synchronous generator to supply the energy demand can affect the power swing parameters. These effects are in a way that can mislead power swing detection methods and cause undesirable tripping of transmission line due to mal‐operation of distance relay against power swing. Therefore, in this paper, a method has been presented based on modified empirical mode decomposition (EMD) method to differentiate fault from power swing in the networks connected to the large‐scale wind farms. The results prove the efficiency of the presented method in detecting the power swing in large‐scale wind farm networks. Finally, a comparison is conducted between the proposed method and similar methods which proves the efficiency and superiority of the proposed method in terms of noise tolerance, detection fault detection speed, and multi‐mode power swing detection compared to the current methods. [ABSTRACT FROM AUTHOR]

In 2019, triggered lightning was used to directly strike phase C of a 1.5 km, 10 kV double‐circuit distribution line in Guangzhou, China, with 2 flashes (13 return strokes) recorded. This paper presents the characteristics of induced voltage at the closest pole on the parallel line. The induced voltage is bipolar, which can be divided into 3 stages: negative increase stage, fast and positive transition stage and slowly returning to zero stage. The positive peak value of phase A voltage ranges from 111.4 to 228.9 kV and that of phase C voltage is from 90.1 to 200.9 kV, corresponding to lightning current from −8.9 to −29.9 kA. The positive peak value of the induced voltage is approximately 3 to 10 times the negative peak value. The negative peak, positive peak and positive 10%–10% duration time of induced voltage show a good linear relationship with the peak value of the return stroke current. There was no flashover occurred during the whole process. The result in this paper can provide data support for numerical simulation and line protection analysis. [ABSTRACT FROM AUTHOR]

State estimation stands as one of the most crucial applications in energy management systems of control centres, ensuring the secure operation of the power system. The real‐time availability of accurate system variables, including voltages, currents, and power flows, presents an excellent opportunity to consider the actual network characteristics, including imbalances. This paper presents a linear and non‐iterative method to solve the three‐phase state estimation problem in transmission systems with unbalanced loading. The method utilises supervisory control and data acquisition measurements obtained from remote terminal units. The formulation is based on complex variables derived from traditional supervisory control and data acquisition measurements, with assumptions made regarding the availability of certain three‐phase bus voltages, as well as a number of three‐phase currents and active and reactive power flows. The proposed algorithm employs the classical weighted least squares technique for solving the three‐phase state estimation problem. Due to its straightforward and linear nature, the method ensures no convergence issues. To validate its effectiveness, the proposed method is validated on a three‐bus network and the IEEE 39‐bus network simulated using the three‐phase model within the DIgSILENT Power Factory environment. [ABSTRACT FROM AUTHOR]

This paper proposes an improved expanding interior algorithm (EIA) to estimate the region of attraction (ROA) of power systems with wind power generation based on sum of squares (SOS) programming. An ordinary differential equation (ODE) model is derived for the doubly‐fed induction generator‐based wind turbine (DFIGWT), which is named as an enhanced synchronous‐generator‐mimicking (ESGM) model. The ESGM model bridges the gap between the requirement of an ODE model in ROA estimation and the conventional differential‐algebraic equation (DAE) model of the DFIGWT system. The ESGM model is able to accurately reflect the low frequency dynamics of the DFIGWT. Moreover, an improved EIA is designed to estimate the ROA based on SOS programming, which has higher efficiency than the existing ROA estimation algorithms based on SOS programming. It is able to adaptively search for the Lyapunov function and obtain an optimal estimation of the ROA in an iterative process. The accuracy and efficiency of this algorithm are verified in three test systems composed of DFIGWTs and synchronous generators (SGs). The morphological changes in the ROA of the test systems caused by the penetration of DFIGWT are examined. [ABSTRACT FROM AUTHOR]

Resilience is one of the main features of smart distribution networks, and a microgrid (MG) access to the distribution network provides an effective way to improve resilience. MG and distribution network belong to different interests, so it is necessary that MGs and flexible resources are actively guided through price leverage. In this way, MGs take part in the post‐disaster restoration and enhance its resilience. Firstly, this paper proposes a dynamic restoration electricity price response mechanism after extreme disasters and constructs a power response model for loads and electric vehicles within the MGs. Secondly, the optimal scheduling model of the distribution network with multiple‐microgrids (MMG) is proposed to improve the restoration rate of critical loads (RRCL). Single microgrid achieves the largest microgrid revenue and restoration contribution, and MMG uses the power headroom index to optimize the dynamic restoration electricity price to achieve the smallest power purchase cost of distribution network. Finally, the optimal scheduling method for resilience enhancement of distribution networks with MMG considering dynamic restoration electricity price response mechanism is validated by dual microgrid access to an IEEE 33‐node distribution system. The simulation results show that the proposed optimization method effectively improves the RRCL of distribution network. [ABSTRACT FROM AUTHOR]

Maintaining stability in modern power systems is challenging due to complex structures, rising power demand, and load disturbances. The integration of renewable energy sources further threatens stability by causing imbalances between generation and demand. Conventional load frequency stabilization methods fall short in such scenarios. This paper proposes an optimal fractional‐order proportional‐integral‐derivative‐acceleration (FOPIDA) controller, enhanced by a robust adaptive neuro‐fuzzy inference system (ANFIS), to improve load frequency control and reliability in power systems with wind and solar generators. First, the dynamical model of a multi‐area interconnected power system, including a thermal power plant, wind turbine, and solar photovoltaic generators, is developed. A decentralized ANFIS‐FOPIDA controller is then designed for load frequency control objectives. The gains of this controller are optimized using the whale optimization algorithm (WOA), focusing on frequency deviation and tie‐line power exchange. Simulations on a New England IEEE 10‐generator 39‐bus power system demonstrate the approach's effectiveness under various disturbances, including random load‐generation disturbances and nonlinear generation behaviors. Comparisons with other strategies, such as fractional order (FO) beetle swarm optimization algorithm (FOBSOA)‐FOPIDA, WOA‐PIDA, and WOA‐ANFIS‐PIDA, and recent control approaches highlight the superior performance of the WOA‐ANFIS‐FOPIDA method in enhancing power system stability. [ABSTRACT FROM AUTHOR]

Autonomous microgrid is known to lack appropriate inertia and damping for grid stabilization. Due to this, virtual synchronous machine (VISMA) has been introduced to provide necessary ancillary services through control of power converters. In a multi‐VISMA (n‐VISMA) microgrid, relative rotor angle stability of the power system is dependent on the active power balance after small perturbation. Thus, the use of relevant analytical models are essential issues for microgrid stability analysis. This paper presents a comprehensive small‐signal stability analysis to study inherent electromechanical oscillations in the virtual rotors. The subsystems of the microgrid consisting of VISMA, network, load and the outer power control were all modelled in Synchronous Reference Frame. The small‐signal model (SSM) was tested on IEEE‐9 bus system with VISMA replacing electromechanical synchronous machines on the network. To validate the developed numerical analytics, dynamic responses of the SSM are compared with those of the non‐linear (NL) system dynamics and the results reveal that the developed linearized SSM is sufficient to accurately characterize behaviour of the VISMA microgrid when operated in autonomous mode. Eigenvalues analysis and parameter sensitivities of the critical modes were investigated. Oscillatory participations of the VISMAs and steady state stability limit of the microgrid have also been investigated. [ABSTRACT FROM AUTHOR]

Machine learned fault detection approaches are being increasingly used for fault detection in distribution grid. However, the performance of the models can be improved by customizing the models. In this regard, a customised artificial neural network (CANN) for fault detection in a distribution grid is proposed in this paper. The proposed work develops a CANN that combines the "up‐pyramid" and "down‐pyramid" model of ANN into a "custom‐pyramid" model. As a result, the same model can be used both for determining the types of fault as well as its location. The data needed to train the model has been taken from a reconfigured IEEE‐33 bus distribution system developed in Typhoon HIL real‐time simulator. Spectral‐kurtosis is utilized for extraction of features of the faulted transient signals which are used as input data to develop the CANN. The result showcases that the reduction of input features reduces computational complexity without compromising its accuracy. The proposed model classifies fault location with an accuracy of 95.43%. The proposed method also identifies fault type with an accuracy of 96.08%. Several test cases have been developed to test the method. The method proved to be able to perform in most of the cases. [ABSTRACT FROM AUTHOR]

Harmonic resonance is caused by harmonic source matching resonance frequency and presents the characteristics of decentralization and whole network in modern grids. The current resonance suppression methods mainly focus on reducing the harmonic source, and are suitable for single‐site and small‐scale grids. This paper presents a new method for suppressing parallel resonance at system level. The holistic harmonic resonance is suppressed by reducing the harmonic impedance. In addition, new resonances are prevented by weakening the coupling between resonance and non‐resonance frequencies. The resonance modal analysis and resonance frequency shift (RFS) are employed to optimize harmonic impedance. Simulation results indicate that the capacitance parameter has higher sensitivity and is theoretically more suitable for RFS. Considering the accuracy of modal frequency sensitivity, a variable‐limit genetic algorithm for iteration is proposed. The validity of the proposed method was verified using an IEEE 14‐bus test network. [ABSTRACT FROM AUTHOR]

The increased penetration of renewable energy sources and the intensification of peak‐valley differences present challenges to peak regulation in the power system. Fulfilling the peak regulation needs of the power system solely through generation‐side resources proves to be challenging. Large‐scale fixed frequency air‐conditioning (FFAC) and inverter air‐conditioning (IAC) are high‐quality flexible load resources. This paper proposes a hierarchical coordinated control strategy of air‐conditioning (AC) loads for peak regulation service. In the first layer of the control strategy, the load aggregator collaborates with multiple AC groups to ensure the completion of peak regulation tasks with specific power‐constrained requirements. In the second layer of the control strategy, the control centre of each group optimizes the temperature adjustment values for each AC load, aiming to reduce incentive costs. Finally, the proposed method is validated through simulations, demonstrating its capability to achieve coordinated control of FFAC and IAC loads under various power‐constrained requirements. Furthermore, the simulation demonstrates the effectiveness of the control strategy in reducing user discomfort and the AC's incentive costs. [ABSTRACT FROM AUTHOR]

The linear power flow (LPF) model is widely used in the optimization, operation, and control of distribution networks. These applications require the LPF model to be accurate, fast, and simple in order to simplify calculations as well as to efficiently perform operations and scheduling. In addition, it is difficult to realize the online update of parameters in the existing LPF models. The model retraining brings serious data burden and inefficiency. To serve these applications and comply with requirements, a brand new LPF model is proposed in this paper. A quadratic power flow model is trained by regression learning first, and then the proposed LPF model is derived by Taylor expansion. After only one initial regression learning, the proposed LPF model no longer needs retraining when updated. The refreshed parameter is simply updated online according to the real‐time measurement data, which improves the generalization ability. In conclusion, the proposed LPF model is accurate, generalizable, and greatly minimizes the data consumption and running time. Performance analysis verifies these superiorities. [ABSTRACT FROM AUTHOR]

Due to the increasing share of inverter‐based renewable energy sources and the increased retrofitting of conventional hydropower plants with power electronics, novel possibilities arise for providing damping power in case of occurring inter‐area oscillations in power systems. This paper presents a complete model of a variable‐speed hydropower plant (VSHP) in a single‐machine infinite bus system. The demonstrated analytical model is applied for small‐signal stability analysis that contains all relevant converter dynamics and is verified by an additional non‐linear time‐domain simulation. The damping controller approach located in the full‐size converter (FSC) consists of the classical power system stabilizer with additional phase compensation, to which an appropriate wide‐area input signal is fed via a phasor measurement unit device. Subsequently, the FSC‐VSHP with additional damping algorithm is examined with respect to the significantly higher damping performance with regard to inter‐area modes in a three‐machine model. [ABSTRACT FROM AUTHOR]

Under the envisioned smart grid paradigm, there is an increasing demand for a fast, accurate, and efficient power flow solution for distribution system operation and control. Various solution techniques have been proposed, each with its own unique formulation, solution methodology, advantages, and drawbacks. Motivated by challenges associated with the integration of renewable distributed energy resources and electric vehicles into distribution systems and further by the speed and convergence limitations of existing tools, this paper presents a novel graph‐based power flow solution for smart grid's real‐time operation and control, named Flow‐AugmentationPF algorithm. The proposed method formulates a power flow problem as a network‐flow problem and solves it by using a maximum‐flow algorithm, inspired by the push‐relabel max‐flow technique. The performance of the proposed algorithm is tested and validated using several benchmark networks of different sizes, topologies, and parameters and compared against the most commonly used solution techniques and commercial software packages, namely PSS/E and PSCAD. The proposed formulation is simple, accurate, fast, yet computationally efficient, as it is based on matrix‐vector multiplication, and is also scalable, considering the formulation works as a graph‐based method, which, inherently, allows for parallel computation for added computational speed. [ABSTRACT FROM AUTHOR]

In distribution networks, among the planning problems, optimal placement of medium voltage to low voltage (MV/LV) transformers is a vital and challenging issue. Electrical load uncertainty is an important factor that affects the result of this planning problem. This paper investigates optimal allocation of service transformers with respect to the load uncertainty modelled by information gap decision theory (IGDT). For this aim, the planning problem is solved in risk‐neutral (RN) and risk‐averse (RA) frameworks. In RN strategy, objective function is defined to minimize the cost of service transformers and low voltage feeders as well as the cost of power losses. On the other hand, in RA strategy, objective function is defined to maximize the radius of the uncertainty in such a way that any deviation of the uncertain parameter results in an objective function value that is not worse than the critical limit. The optimization problem is solved by crow search algorithm (CSA) and particle swarm optimization (PSO) and the results are compared. In mid‐term planning, with respect to the deviation factors of 0.05, 0.1, 0.15, 0.2, 0.25 and 0.3, optimal values of the uncertainty radius are 5.89%, 13.64%, 21.37%, 28.97%, 34.39% and 43.46%, respectively. In long‐term planning, with respect to the deviation factors of 0.05, 0.1, 0.15, 0.2, 0.25 and 0.3, optimal values of the uncertainty radius are 6.92%, 13.33%, 20.39%, 27.03%, 34% and 40.46%, respectively. Moreover, on average, CSA finds more promising results than PSO. [ABSTRACT FROM AUTHOR]

This paper proposes a new multistage AC model for transmission expansion planning that finds an optimal combination of transmission lines, fault current‐limiting high‐temperature superconducting cables, and multiple distributed generations (DGs). On this basis, the proposed model, from a new perspective, allows for simultaneous improvement of the short‐circuit level and grid‐scale flexibility (GFLX) under both normal and fault conditions. The objective function to be minimized includes not only the net present worth of the total investment and operation costs but also the congestion‐induced GFLX degradation measure. This model also takes the AC power balance and flow relationships, equipment capacity limits, nodal voltage bounds, DG penetration level limit, as well as discrete logical and financial restrictions together into account with the short‐circuit level constraint. To overcome the complexity of solving the resultant non‐convex mixed‐integer non‐linear optimization problem, a multi‐objective integer‐coded melody search algorithm is employed, followed by a fuzzy satisfying decision‐making mechanism to obtain the final optimal solution. The exhaustive case studies conducted on the IEEE 24‐ and 118‐bus test systems verify the efficacy of the newly developed model in terms of cost‐effectiveness, flexibility, and short‐circuit level suppression when facing different normal and fault conditions. [ABSTRACT FROM AUTHOR]

A machine learning‐based optimized droop method is suggested here to simultaneously reduce the production cost (PC) and power line losses (PLL) for a class of direct current (DC) microgrids (MGs). Traditionally, a communication‐less technique known as the hybrid droop method has been employed to decrease PC and PLL in DC MGs. However, achieving the desired reduction in either PC or PLL requires arbitrary adjustments of weighting coefficients for each distributed generator in the conventional hybrid droop method. To address this challenge, this paper introduces a systematic approach that capitalizes on the benefits of artificial intelligence to accurately predict both the PC and PLL in a DC MG. Furthermore, an optimization technique relying on the gradient descendent method is employed to independently optimize both PC and PLL for each scenario. The effectiveness of the proposed method is confirmed through a comparative study with classical and hybrid droop coordination schemes under various scenarios such as rapid load changes. [ABSTRACT FROM AUTHOR]

Existing interturn fault detecting methods rely on winding impedance, winding current, and dissolved gases. They are effective only when the insulation is severely damaged. This paper proposes a novel detection method based on fusion analysis of electrothermal characteristics including winding currents, temperatures of four areas on the tank wall, top oil and ambient temperatures, which can identify the interturn fault at an early stage. When an incipient interturn fault occurs, the heat generated by the faulty turns is transferred to the oil and tank wall, leading to an increase in top oil and tank wall temperatures. Thus, the incipient fault can be detected by analysing these electrothermal characteristic parameters. Borrowing the idea of digital twin (DT), this method establishes a high‐fidelity simulation model to simulate the transformer electrothermal characteristics under different operating conditions. Afterward, an intelligent neural network is adopted to extract the quantitative relationship between the eight feature attributions and fault conditions. Finally, this neural network is utilized to detect the incipient interturn fault for the transformer entity. Case studies are conducted on a 100 kVA transformer with oil natural air natural (ONAN) cooling mode. The detection accuracy is improved by 68.5% compared to the winding current‐based method. [ABSTRACT FROM AUTHOR]

This paper presents a state‐space average model of a three‐level photovoltaic (PV) inverter to understand short‐circuit currents transient characteristics. Analytical solution of the model is also derived. The proposed model is validated with PV system controller hardware in‐loop (HIL) test method. The errors between simulation and HIL tests results under various conditions are evaluated, testifying the validity of the proposed model. With the model and analytical solution, the decaying time constants of sub‐transient and transient processes are derived, which shows that the time constants of a three‐level PV inverter are not fixed and they vary with voltage dips. The analytical expression of short‐circuit currents is also formulated. The findings from this study are essential to short‐circuit current calculations of a power grid with large‐scale PV plants, coordination of power system protections, and grid planning. [ABSTRACT FROM AUTHOR]

The explosion accident due to the internal arc fault in the metal‐enclosed switchgear cannot be ignored. Therefore, improving the ability of switchgear to resist the arc fault has important significance. In this paper, a passive protection measure by installing the buffer volume (BV) was proposed. The short‐circuit arcing tests were carried out in the small‐scale switchgear compartments, and the pressure rise was measured in the different models. The changes of pressure rise before and after installing BV were analyzed. Then, the calculation methods of pressure rise in the compartments and the mechanical response of the enclosure were put forward. By calculating the distributions of the pressure rise and temperature rise in the compartments, as well as the time‐varying displacement and stress of the enclosure, the pressure relief effect of the BV has been discussed. Results show that after installing the BV, the pressure rise, displacement, and stress are all decreased obviously in the initial of arcing. Hence, the arc fault protection effect for the switchgear can be improved by properly installing the BV. [ABSTRACT FROM AUTHOR]

Contemporary distribution networks can be seen with diverse dispatchable and non‐dispatchable energy resources. The coordinated scheduling of these dispatchable resources with non‐dispatchable resources can provide several techno‐economic and social benefits. Since battery energy storage systems (BESSs) and microturbine units are capital intensive. A thorough investigation of their coordinated scheduling on a purely economic basis will be an interesting and challenging task while considering dynamic electricity price and uncertainty of renewable power generation and load demand. This paper proposes a new methodology for optimal coordinated scheduling of BESSs and microturbine units considering existing renewable energy resources and dynamic electricity price to maximize daily profit function of the utility. In this study, a recently explored modified African buffalo optimization algorithm is employed. The key attributes of the proposed methodology are comprised of mean price‐based adaptive scheduling embedded within a decision mechanism system to maximize arbitrage benefits. Decision mechanism system keeps a track of system states as a‐priori thus guides the artificial intelligence‐based solution technique for sequential optimization. This may also reduce the computational burden of complex real‐life engineering optimization problems. Further, a novel concept of fictitious charges in coordination with BESS management algorithm is proposed to restrict the counterproductive operational management of BESSs. The application results investigated and compared on a benchmark 33‐bus test distribution system highlights the importance of the proposed methodology. [ABSTRACT FROM AUTHOR]

Proper current sharing, DC bus voltage deviation reduction, and SOCs balancing, along with ensuring stability are the vital challenges of DC microgrids control algorithms. Addressing these challenges without communication links and a central controller is one of the priorities of control methods. Motivated by the above mentions, this paper presents a novel communication‐free control method. In this regard, a new parameter called "virtual current" is defined according to the unit current and its SOC. Then using a piecewise droop curve and the droop curve shift technique, the virtual current for each unit is determined. The units control coefficients and the relationship of the virtual current are allocated based on the location and power of the loads and RESs such that in the worst case; 1) SOCs are converged; 2) the DC bus voltage deviation is reduced; and 3) the current is appropriately distributed. The simulation and experimental results confirm that the proposed method can balance SOCs like SOC‐based methods and share power properly like piecewise droop methods while reducing DC bus voltage deviation. [ABSTRACT FROM AUTHOR]

The paper presents a ground fault location algorithm (GFLA) in double‐circuit transmission lines (DCTL) with a T‐off connection to an industrial microgrid (IMG) containing electric arc furnaces (EAF), renewable distributed generations (RDG), and static VAR compensator (SVC). The design presented utilizes the information on the current and voltage phasors of one side of the transmission lines (TL) during the fault period, and there is no need for the availability of information on the type of faulty phase(s) and even the faulty section. To find the exact location of the fault in this design, the voltage phasor equations governing the fault point in positive, negative, and zero‐sequence (PNZS) domains, the zero‐sequence current (ZSC) equation of the fault point, and the boundary condition equation of the fault point have been used. The simulation system is implemented in Simulink/MATLAB using accurate modelling of all network components. The algorithm has been tested and evaluated in different fault conditions, including various locations, phase types, phase‐to‐ground connection resistance, occurrence time, and microgrid (MG) operation modes. The successful results of various tests of the proposed design as well as the analysis of various sensitivities confirm the satisfying performance of the suggested algorithm. [ABSTRACT FROM AUTHOR]

There exist problems of hard coordination and threshold setting as well as low sensitivity in overcurrent relay due to the bidirectional and small fault current when distributed generators are integrated into the distribution network. This paper introduces ferrite rings (FRs) to act as boundaries of distribution feeders, and a peak time of voltage traveling wave‐based protection is proposed. The characteristics of FRs are analyzed and their feasibility as line boundary is validated. The fault characteristics of internal and external faults are analyzed when FRs are installed at both ends of the protected feeder. The results show that the peak time of the voltage travelling wave of the internal fault is far smaller than that of the external faults. According to the difference, the fault detection method and the protection scheme are proposed. Simulations in PSCAD and experiment validate that the proposed protection principle can reliably distinguish between internal and external faults. Besides, the proposed protection scheme has higher sensitivity compared to ROCOV‐based protection. [ABSTRACT FROM AUTHOR]

With the increasing application of renewable energy sources (RESs), more and more grid‐connected voltage‐source converters (VSCs) in the grid need to operate in a "grid‐forming" manner. However, when large disturbances occur in the grid, grid‐connected converters may lose synchronization and cause the current to exceed set limits. To ensure the stable and safe operation of VSC during large disturbances and to improve the power supply capacity during voltage dips of RES, this paper proposes an emergency control method that takes into account the virtual synchronous generator (VSG) current limit and transient stability based on a large‐signal mathematical model of the VSG during fault and normal states. The method divides the operation area of the VSG into non‐emergency area and emergency area. If the operating point is in the non‐emergency region after a fault, only the active power reference value is changed to avoid current exceeding the limit and transient instability; if the operating point is in the emergency region, the current exceeding the limit and transient instability are avoided by changing the active power reference value and adding in the virtual impedance. Finally, the effectiveness of the proposed control strategy is verified by simulation. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of the fault current contributions of small‐scale single‐phase photovoltaic inverters under grid‐connected operation and their potential impact on the protection of distribution systems. To conduct this analysis, an autotransformer‐based voltage dip generator is proposed as a means to test the photovoltaic inverters' contribution to short‐circuit currents. Laboratory tests are then performed to obtain the short‐circuit current contribution of eight single‐phase photovoltaic inverters. Using the short‐circuit current data obtained, a behaviour model is developed and simulated on Matlab‐Simulink. The model is then applied to a real distribution system and case studies are conducted to simulate the potential impacts on the protection system. Results indicate that while the massive penetration of small‐scale single‐phase photovoltaic inverters can alter the protection system's operating time, the impacts are not significant. Only in very specific scenarios, such as events related to high impedance faults, some impact can be observed. In these situations, the presence of photovoltaic inverters further complicates the already difficult task of identifying high impedance faults through conventional overcurrent protections. This study provides valuable insights into the integration of photovoltaic inverters into distribution systems, and can aid in the development of effective protection measures for future grid designs. [ABSTRACT FROM AUTHOR]

The rapid growth of offshore wind power has resulted in a mismatch between generation and demand because of its variability. To quantify the maximum wind power penetration of the transmission network, the dispatchable region is defined as the largest region in the uncertainty space. The security distance is defined as the minimum distance from the operating point to the boundaries of the dispatchable region. System operators can use security distance as a metric to assess the flexibility of the power system. This paper proposes a method to construct the dispatchable region for the AC/DC hybrid system with VSC‐HVDC by outer convex relaxation firstly. The second‐order cone relaxation is employed to reformulate non‐convex and non‐linear power flow equations. Next, a polyhedral approximation is adopted to obtain the convex hull of the dispatchable region. Subsequently, an efficient algorithm known as adaptive constraint generation (Ad‐CG) is introduced to calculate the boundaries of the dispatchable region. Furthermore, solving the Chebyshev centre problem determines the minimal security distance. The modified IEEE 5‐bus and 39‐bus system is used for validating effectiveness of the proposed method and evaluating the impact of the converter reactive power compensation capacity and generation dispatch on the dispatchable region. [ABSTRACT FROM AUTHOR]

Affected by inverter station commutation failure and fast control, line fault characteristics are obviously different from traditional AC transmission line fault characteristics. The existing protection methods for AC line connected to line commutated converter based high voltage DC (LCC‐HVDC) inverter station (ACLs) have the problems of complex setting, weak anti‐noise and high demand for data synchronization. This paper proposes a pilot protection scheme based on high‐frequency transient current waveform similarity. Firstly, with analyzing the fault traveling wave propagation process, the obvious differences are found in the transient current waveforms at both ends of the line when internal and external faults occur. Then the similarity of transient current waveforms is measured with the improved longest common similar subsequence (LCSS) method. And the weak high‐frequency current is extracted with the improved synchronous squeezed S‐transform (SST) method. Finally, a large number of power systems computer aided design (PSCAD) simulation results show that the proposed protection method does not require strict data synchronization, has strong anti‐noise performance, and is tolerant to the influence of abnormal point fluctuations. [ABSTRACT FROM AUTHOR]

The integration of the renewable energy sources (RESs) into the power grid, drives a significant transformation in the conventional power generation landscape. This transition from traditional synchronous generators to inverter based RESs introduces unique challenges in maintaining the grid frequency stability due to the reduced system inertia. The inherent stochastic nature of the RES power generation, load demand, and grid inertia includes further complexity in the assessment of frequency stability. Existing studies have limitations, including neglecting the stochastic nature of RES generation and load demand fluctuations, relying on limited metrics, and lacking a comprehensive day‐to‐day assessment. To address these shortcomings of the existing approaches, this paper introduces a novel methodology for assessing frequency stability in power grids with high RES penetration. It proposes three indices for evaluating grid frequency sensitivity, resiliency, and permissibility amidst varying RES integration. Utilizing a stochastic approach, the study incorporates uncertainties in RES generation and load demand, offering a comprehensive framework for day‐to‐day frequency stability analysis. Additionally, it presents a systematic method to ascertain the necessary inertial support for maintaining desired frequency reliability in RES‐dominated grids. The effectiveness of these methodologies is validated through a case study on a modified IEEE 39‐bus test system, demonstrating their applicability in ensuring reliable grid operation under high RES scenarios. [ABSTRACT FROM AUTHOR]

The integration of high proportion renewable energy not only brings many benefits, but also increases the difficulty of power system stability analysis. One of the reasons for this problem is the unclear internal characteristics of new energy equipment. Therefore, there is an urgent need for a more detailed analysis of the characteristics of new energy equipment. Taking a double‐fed induction generator (DFIG), which has complex operation characteristics and is widely used, as an example, a detailed energy function (DEF) of DFIG for small signal stability analysis is proposed in this paper. This method performs DFIG's internal energy analysis, making the traditional energy structure more comprehensive. On this basis, the internal parameters of DFIG with high sensitivity to stability are obtained, and the damping evaluation index is constructed to evaluate the damping of DFIG. Finally, the proposed model's correctness and method are verified in the 4‐generator 2‐area system. [ABSTRACT FROM AUTHOR]

The UK net‐zero target requires the integration of significant renewable energy resources into the electrical grid. This, together with the projected growth in electricity demand imposes practical challenges on the power transfer capability of existing transmission feeders. For environmental and planning reasons, construction of new overhead lines is problematic, and where possible upgrading of existing substations and lines is preferred. This paper investigates the feasibility of transforming an existing three‐phase (3Φ) double‐circuit 400 kV line into a six‐phase (6Φ) feeder for a simulated future GB scenario. Results indicate a 6Φ feeder, operating at a 'phase‐adjacent phase' voltage of 400 kV can effectively solve the constraints of boundaries in transmission networks. When considering the various operating contingencies, associated with an important UK network boundary and its expected near‐future winter‐peak power transfer requirements, the thermal overload issues are mitigated by transforming a feeder from 3Φ to 6Φ. The paper demonstrates upgrading to 6Φ technology is a potential solution to certain future boundary constraints and in these cases avoids the need to build new underground or overhead AC/DC lines. [ABSTRACT FROM AUTHOR]

At present, the MVDC distribution grid is developing rapidly and relay protection is the key technology to ensure stable operation. Therefore, this paper focuses on the fault line selection method. Firstly, the fault characteristics are analysed when a fault occurs in the line, and a novel single‐pole fault line selection method is proposed based on 0‐mode power. The polarity of current fault component measured at the terminal of each line is used to identify the internal and external faults. And the 0‐mode power is used to select the faulty line. Finally, to verify the correctness of the proposed method, a radial MVDC distribution grid is built in PSCAD to output fault data in different fault conditions, and the fault line selection algorithm is implemented in MATLAB. The simulation results show that the proposed method is fast, effective, reliable and it has a certain degree of tolerance to transition resistance with a strong anti‐data delay and anti‐interference ability. Moreover, the fault line selection method proposed in this paper can still correctly select the fault line in the case of serious faults such as multiple line faults, sudden removal of lines, and sudden changes in photovoltaic output power. [ABSTRACT FROM AUTHOR]

This paper proposes a new robust method for accurately and reliably estimating remote bus frequencies in a power system. Two different measurement sources for the remote bus frequency are considered, that is, the ideal Frequency Divider (FD) and the Synchronous Reference Frame Phase Locked Loops (SRF‐PLLs). Each measurement signal encounters different uncertainties and data quality issues. In this paper, both data sources are employed and fused together to better estimate the remote bus frequencies. To this end, the model structure of the power system is selected and an Unscented Kalman Filter (UKF) is utilized together with a fusion covariance intersection method to enhance the accuracy of the estimated bus frequency. Since the fusion estimation method fails in case of quality issues on both channels, a robust Generalized Maximum‐likelihood UKF (GM‐UKF) using a novel outlier detection criteria is developed. The impact of the resulting robust fusion filter on the estimation of the remote bus frequencies and on the performance of WAPSS, which makes use of the estimated frequencies as the feedback signal, is examined via simulations. The results demonstrate the excellent performance and reliability of the proposed method in dealing with noise filtering and outlier suppression while ensuring a high statistical efficiency. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to examine cyber security issues related to smart grids (SGs), such as prior cyber‐attacks, possible vulnerability issues, and enhanced cyber‐security procedures for SGs on a technical and management basis. When designing public policies for SGs, it is important to consider both the motivations and obstacles to cyber protection and socio‐economic conditions. Furthermore, the importance of suggested policies is viewed from various perspectives. The present paper provides an assessment of a group of policies specified by various stakeholders as having the potential for developing SG cyber security. The methodology for the formation of such a group of policies includes a perfect examination of global experience and meetings with experts from various fields. Subsequently, such policies are evaluated using a Delphi questionnaire aimed at assessing their advantages in pursuing investment goals for cyber security. The first result is that every policy is considered a positive effect of all goals, different in the priority assigned to each of them. The policies that received the most attention were: "regulatory changes policy to foster innovation in cyber security of SGs," "regulation of new business models to improve cyber security and detect malicious attacks" and "establish a cyber‐security governance strategy." [ABSTRACT FROM AUTHOR]

With the emergence of the Smart Grid concept, utility companies require more active participation of home users in the power sector. This changing paradigm is enabled by the wide deployment of multiple home assets such as small renewable‐based generators or storage facilities. In this context, consumers are no longer conceived as pure loads but also active agents that can exchange energy with the grid. To promote this active participation, utility companies promote different price‐based demand response programs to change the consumer patterns on pursuing a more efficient and economic system operation. In this regard, home energy management programs are becoming an essential tool for efficiently managing the different home users while addressing multiple demand response goals at minimum cost. In essence, a home energy management system is a computational optimization tool, which has to handle multiple uncertainties brought by weather forecast or energy pricing. This paper tackles this issue by developing a novel robust home energy management program based on interval optimization. In contrast to other related approaches, the proposal avoids the explicit use of interval arithmetic. Instead, the different uncertain parameters are sequentially incorporated into the scheduling task through different stages and interval‐based formulation. The developed methodology incorporates weather, load, energy pricing and plug‐in electric vehicle related uncertainties. A benchmark case study in a smart prosumer layout serves to prove the effectiveness of the new approach. [ABSTRACT FROM AUTHOR]

With the development of intelligent distribution networks and the proposal of the carbon peaking and carbon neutrality goals, the importance of demand‐side management for the improvement of flexible power operation systems is becoming increasingly prominent. To solve the problems of the excessive peak–valley load differences, the insufficient utilization of demand‐side resources, and the unreasonable pricing of aggregators, this paper proposes a three‐stage economy optimization method for the aggregator based on EV(electric vehicle) user response volumes. To gain the advantages of different types of EVs while increasing the dispatchable capacity, the contract mode between the aggregator and EVs is divided into three categories: complete dispatching, rolling reward and punishment mechanism dispatching, and free dispatching. Based on the cloud model, considering loss aversion, the user's own time flexibility, and the impact of the tariff set by the aggregator on the user's decision‐making, we introduced indicator weights to obtain the improved cloud model. Based on the improved cloud model, a user response volume model is obtained. Then, the aggregator performs a three‐stage pricing optimization operation for EVs based on the bid‐winning peak shaving capacity. In the first stage, the attraction between EVs and charging stations is determined based on the law of gravity, and the charging and discharging reward electricity price is set. In the second stage, the dynamic electricity price of three types of EVs and the charging punishment electricity prices of the rolling reward and punishment mechanism dispatching type are determined. In the third stage, the electricity price of the rolling reward and punishment dispatching EVs is further optimized based on their lack of peak shaving capacity. The method proposed in the paper has been verified to be effective in increasing aggregator profits, increasing EV dispatch capacity, and reducing EV charging costs through the example analysis. [ABSTRACT FROM AUTHOR]

The upcoming network investment decisions and regulatory framework adopted by distribution system operators (DSOs) are most likely to be impacted by the integration of fluctuating distributed generation. The economical hosting capacity (HC) improvement method is investigated in this paper as a trade‐off between curtailment and upgrade using a Monte Carlo simulation procedure. The associated costs of both methods are vital indicators for network operators that are trying to maximize the HC and minimize cost. In addition, the breakeven point where curtailment and upgrade costs intersect is the decisive point at which network upgrade becomes sensible as marginal curtailment cost exceeds upgrade cost. A shift in global climate conditions can impact the photovoltaic (PV) levels that motivate network operators to investigate PV penetration, especially in colder climate regions. Thus, the primary objective of this paper is to investigate the shift of the breakeven point to guide DSOs to either adopt PV curtailment as a temporary measure or grid upgrade as a risk aversion strategy considering Finnish climate and load patterns. The real‐time load and PV generation data are utilized for the simulations to consider the dynamic performance indication of three Finnish distribution networks. Curtailment remains a low‐cost option to obtain a percentage HC rise of 13%, 7%, and 8% for rural, suburban, and urban regions, respectively, beyond which curtailment compensation cost surpasses upgrade cost. In essence, PV curtailment serves as an immediate and least‐cost solution to relieve network violations and defer network investment until the HC level (118%, 106%, 97%) making the upgrade a practical option afterwards. [ABSTRACT FROM AUTHOR]

This paper offers non‐linear control for enhancing the transient stability in power systems containing a photovoltaic (PV) and doubly fed induction generator (DFIG) by transient energy function (TEF) method and finite‐time observers. At first, the TEF method is utilized to enhance the transient stability in a power system containing a PV, DFIG, and synchronous generator (SG) by constructing a hybrid Lyapunov function. Then, the derivative terms in control are estimated with finite‐time observers. The main contribution of the research is the application of the TEF technique in the transient stability evaluation of a power system consisting of PV, SG, and DFIG. Another innovation of the research is the simultaneous control of DFIG and PV, whose uncertain parameters are estimated with the use of finite‐time observer. The proposed non‐linear control scheme is robust against changes in the configuration of the power system. In order to show the capability of this control scheme, time domain simulations are performed on the IEEE 9‐bus, and the NEW ENGLAND Standard 39‐Bus power system. Using the obtained result, some comparisons are made with the back‐stepping control scheme to clarify the superiority of the proposed method. The comparisons show that the proposed non‐linear control scheme can properly provide extra damping to reduce the first‐swing fluctuations in less time. The manuscript contains the new original results of the authors' research. In this article, to maintain and improve the transient stability, a new controller with simultaneous management of photovoltaic (PV) and doubly fed induction generator (DFIG) has been developed. The contributions of the paper are as follows. (1) The transient energy function (TEF) is obtained for the power system containing synchronous generator (SG) and DFIG. (2) The control laws are acquired with four PV and DFIG control variables. (3) The derivative parameters of the PV and DFIG controls by a finite‐time observer are estimated. [ABSTRACT FROM AUTHOR]

The goal of contingency ranking is to provide a list of possible critical situations and rank them according to the severity of their impact on a power network. The methods of contingency ranking may be divided into two major categories: static and dynamic techniques. Static approaches are fast and can be implemented in real‐time, but they present different results depending on the parameter which has been selected for contingency ranking. Dynamic methodologies are more accurate than static ones, but they are time‐consuming. This paper presents a novel combined static and dynamic method for contingency ranking which takes advantage of both techniques and shows the performance evaluation for the hybrid method using accuracy and efficiency as criteria. The proposed method uses three well‐known static indices and the Lyapunov spectrum based dynamic approach to select the worst critical lines. IEEE 39‐bus (New England grid) and IEEE 118‐bus networks are utilized to verify the proposed method. The method provides speed and accuracy. One of the prominent features of the proposed approach is its ability to rank contingencies that lead to network load flow divergence. [ABSTRACT FROM AUTHOR]