Search

In this study, different types of antioxidants (AO) such as natural and synthetic AOs are mixed with mineral oil (MO) at various individual and grouping concentrations to enhance the life of transformers. Water content in oil, water content in paper, breakdown voltage, acidity, 2‐furaldehyde concentration, degree of polymerisation and tensile strength are the laboratory‐based ageing‐related performance characteristics considered in the proposed work to evaluate the degradation rate of MO samples. Multi‐criteria decision‐making methods such as analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS) are used to identify the sample concentration which gives maximum performance while considering all the characteristic performance of the MO samples precisely. Two different methods are employed to assess the performance characteristics of the MO samples. In first method, AHP is employed for both priority weight calculation and ranking of MO samples. In second method, AHP is used for weight calculation and TOPSIS is used for ranking. From the experimental results, it is found that, the MO sample S5 yields better performance when compared with other samples. Hence, it is suggested that MO sample S5 can be the best alternative for transformer oil. [ABSTRACT FROM AUTHOR]

Driven by the demand for carbon emission reduction and environmental protection, battery swapping stations (BSS) with battery energy storage stations (BESS) and distributed generation (DG) have become one of the key technologies to achieve the goal of emission peaking and carbon neutrality. Therefore, this paper proposes a strategy to optimize the operation of BSS with photovoltaics (PV) and BESS supplied by transformer spare capacity. Firstly, it introduces the operation mechanism of BSS and uses the spare capacity of building special transformers and the roof PV to supply power to BSS to avoid the investment of transformers. Secondly, this paper establishes the load model of BSS and proposes the charging rules of battery swapping. Thirdly, a segmented pricing mechanism for the rental price of special transformers is formulated to guide BSS operators to preferentially rent spare capacity during low load rate periods. Aiming at the maximum daily profit of BSS, an optimization model is established to optimize the number of batteries to be charged and the charging status of BESS in each period; on this basis, the demand response model is further proposed. Simulation results show that the proposed strategy can improve the daily profit of BSS through shifting load. And the configuration of BESS can improve the battery swapping capacity and peak‐shaving ability. Moreover, the exponential segmented pricing mechanism can greatly reduce the number of high load periods and reduce the burden on the power supply. [ABSTRACT FROM AUTHOR]

The nearest level modulation (NLM) is used to automatically generate ac side voltages of sub‐modules in modular multilevel converter (MMC). Existing literature seldom presents models that describe complex NLM processes. This paper proposes an equivalent model of the NLM to simply describe and simulate the complex NLM process. The main contribution of this study is to build the model of NLM with fast simulation speed for the application focuses on the simulation accuracy at the millisecond level. The duty cycle of the average model generated by the NLM in sub‐modules of the MMC is divided into two components, which are the stable component for generating the bridge arm voltage and the fluctuation component for balancing the dc side voltage of sub‐modules, respectively. The stable component is generated by the modulation wave of the MMC control system. By adding a voltage control closed loop to the sub‐module, the fluctuation component for balancing the dc side voltages of sub‐modules can automatically adjust the ac side voltages of sub‐modules. The proposed equivalent model of NLM improves the simulation speed and has the same effect with the traditional NLM within the low‐frequency range or with the time step of millisecond level. [ABSTRACT FROM AUTHOR]

The social economy is growing rapidly, and the power grid load demand is increasing. To maintain the stability of the power grid, it is crucial to achieve accurate and rapid power system stability assessment. In the actual operation of the power network, data loss is an unavoidable situation. However, most of the data‐driven models currently used assume that the input data is complete, which has obvious limitations in real‐world applications. This paper suggests an IVS‐GAN model to assess power system stability using incomplete phasor measurement unit measurement data with random loss. The proposed method combines the super‐resolution perception technology based on generative adversarial network (GAN) with a time‐series signal classification model. The generator adopts a 1D U‐Net network and uses convolutional layers to complete and recover missing data. The discriminator adopts a new gated recurrent unit–attention architecture proposed here to better extract voltage temporal variation features on key buses. The result of this paper is that the stability evaluation method outperforms other algorithms in high voltage data loss rates on the New England 10‐machine 39‐bus system. [ABSTRACT FROM AUTHOR]

Multi‐terminal high‐voltage direct current technology based on voltage‐source converter stations (VSC‐MTDC) is expected to be one of the most important contributors to the future of electric power systems. In fact, among other features, it has already been shown how this technology can contribute to improve transient stability in power systems by the use of supplementary controllers. Along this line, this paper will investigate in detail how these supplementary controllers affect electromechanical oscillations, by means of small‐signal stability analysis. The paper analyses two control strategies based on the modulation of active‐power injections (P‐WAF) and reactive‐power injections (Q‐WAF) in the VSC stations which were presented in previous work. Both control strategies use global signals of the frequencies of the VSC‐MTDC system and they presented significant improvements on transient stability. The paper will provide guidelines for the design of these type of controllers to improve both large‐ and small‐disturbance angle stability. Small‐signal stability analysis (in Matlab) has been compared with non‐linear time domain simulation (in PSS/E) to confirm the results using CIGRE Nordic32A benchmark test system with a VSC‐MTDC system. The paper analyses the impact of the controller gains and communication latency on electromechanical‐oscillation damping. The main conclusion of the paper is that transient‐stability‐tailored supplementary controllers in VSC‐MTDC systems can be tuned to damp inter‐area oscillations too, maintaining their effectiveness. [ABSTRACT FROM AUTHOR]

The virtual synchronous generator (VSG) is a good solution for stabilizing the power system with high penetration of renewable energy. However, in case of serious unbalanced voltage disturbance/fault, the conventional VSG may lose voltage, inertia, and damping support characteristics to the grid and even can cause disconnection of renewable energy. This paper proposes an improved fault control strategy for VSG with the coordination of STATCOM. The proposed method can provide sufficient voltage support while keeping continuous system inertia and damping support under severe unbalanced fault. In the paper, an improved VSG and STATCOM control topology based on positive and negative sequence current control are first proposed so as to keep the damping and inertia support to grid during the grid fault. Secondly, the voltage support control method for the VSG with improved topology during unbalanced fault is introduced, which can achieve multiple control objectives, in terms of voltage support, current limitation, and active power output simultaneously. Then a coordination control scheme of improved VSG and STATCOM is developed so as to optimize the maximum control objectives in all possible scenarios, especially in the case of severe unbalanced fault. Finally, the effectiveness of the method is verified by using the MATLAB/SIMULINK simulation platform. [ABSTRACT FROM AUTHOR]

In recent years, the interest in using DC microgrids has greatly increased due to their higher efficiency, less complexity, and greater transmission power compared to AC microgrids. To address challenges in DC microgrids in the presence of electrical vehicles (EVs) and the uncertainty of charging EVs, researchers have used PV/EV combination systems with energy storage systems (ESS). Controlling DC microgrids, including PV/EV/ESS, is crucial to cope with the existing challenges. On the other hand, the research on DC microgrids' protection systems is in the early stages, and there are still many challenges in this field. In addition, differences in control systems can pose different challenges for the protection system. The simulation results in this paper demonstrate that considering the best case (use of unipolar resistance grounding system) the DC bus voltage is improved by 22.3% (based on MAPE% data comparison). In the protection part, the empirical‐mode decomposition (EMD) method and selecting a suitable intrinsic mode functions (IMF) have been used to protect the DC microgrid. The proposed protection method has been tested under pole‐to‐pole and pole‐to‐ground fault conditions. The results show that the proposed method is capable of detecting various fault types in the studied microgrid. [ABSTRACT FROM AUTHOR]

The utilization of accurate models is crucial in the various stages of development for photovoltaic (PV) systems. Modelling these systems effectively allows developers to assess new modifications prior to the manufacturing phase, resulting in cost and time savings. This research paper presents a viable approach to accurately estimate both static and dynamic PV models. The proposed estimation method relies on a novel and enhanced optimization algorithm called leader artificial ecosystem‐based optimization (LAEO), which improves upon the original artificial ecosystem‐based optimization (AEO). The proposed LAEO algorithm integrates the adaptive probability (AP) and leader‐based mutation‐selection strategies to enhance the search capability, improve the balance between exploration and exploitation, and overcome local optima. To evaluate the effectiveness of LAEO, it was tested on 23 different benchmark functions. Additionally, LAEO was applied to estimate the parameters of static three‐diode PV models, as well as integral‐order and fractional‐order dynamic models. This paper showcases practical implementations of photovoltaic (PV) parameter estimation in various scenarios, including the static three‐diode model, dynamic integral order model (IOM), and fractional order model (FOM). The results were assessed from various angles to examine the precision, performance, and stability of the LAEO algorithm. [ABSTRACT FROM AUTHOR]

In addition to providing mobility, plug‐in hybrid electric vehicles (PHEVs) provide a two‐sided energy exchange opportunity which makes them highly flexible distributed energy storage systems for the future of energy systems. This paper analyzes PHEVs' performance from the perspective of urban traffic and energy using a decentralized multichannel blockchain network based on the hyperledger model. This network using a layered design and local management of energy sources can significantly contribute to urban management and optimal use of its infrastructures. Then, dynamic modelling of PHEVs in this network is performed, and their data is added to the network to evaluate the network performance compared with the current centralized networks. The results indicated that the proposed blockchain network could simultaneously optimize PHEVs' performance, urban traffic management, and energy systems. Furthermore, by utilizing smart contracts, it can consider and optimize multiple challenges, such as congestion in the electricity network, urban traffic, and limited fuel, simultaneously. Therefore, it gives a strong tool to study the impact of mass deployment of PHEVs and their value and role in the sustainable cities and communities of the future while helping to support the global efforts toward affordable and clean energy for all. [ABSTRACT FROM AUTHOR]

In this paper, Gaussian Process Regression (GPR)‐based models which use the Bayesian approach to regression analysis problem such as load forecasting (LF) are proposed. The GPR is a non‐parametric kernel‐based learning method having the ability to provide correct predictions with uncertainty in measurements. The proposed model provides an hourly and monthly load forecast for an Australian city and four Indian cities in the Maharashtra state. Twelve GPR models are trained with historical datasets including hourly load and environmental data. To evaluate the trained model, the actual and predicted load demand curve is plotted and mean average percentage error (MAPE) is calculated corresponding to different kernel functions of the GPR model. To the best of the author's knowledge, the prediction of load demand using GPR for Indian cities of Maharashtra state has been made for the first time. The calculated MAPE in LF is 0.15% for Australia and 0.002%, 0.209%, 0.077%, and 0.140% for Indian cities viz. Nasik, Bhusawal, Kolhapur, and Aurangabad, respectively. The test results illustrate that minimum MAPE in load prediction is obtained using the proposed model that is GPR with 'Exponential' kernel functions. Furthermore, the comparative analysis with the existing approaches confirms the dominance of the proposed model. [ABSTRACT FROM AUTHOR]

Accurate power load prediction is an important guide for power system planning and operation. High‐ or low‐load prediction results will affect the operation of the power system. In recent years, deep learning technology represented by convolution neural network (CNN) and transformer has been proved to be suitable for power load prediction. This paper proposes a new short‐term power load hybrid forecasting model, called channel enhanced attention (CEA) and temporal convolutional network (TCN)‐based transformer comprehensive forecasting model. This method combines the short‐term feature extraction ability of TCN with the long‐term dependent capture ability of transformer for short‐term load forecasting. And the CEA designed in this study is added to improve the prediction accuracy. On the same dataset, the designed model predicts power load mean square errors of 0.056 and 0.146 for the next 24 h and the next week, respectively, which is 0.002 to 0.073 and 0.012 to 0.024 lower than the baseline model. The experimental results show that the hybrid short‐term power load prediction model proposed in this paper is significantly better than the existing methods. The predicted curve is in agreement with the actual charge change, which provides a good guidance for short‐term power load prediction. [ABSTRACT FROM AUTHOR]

Since compact high temperature superconducting (HTS) transformer has a small size and high efficiency, it can meet the requirements of high‐voltage transformers for vehicle‐mounted mobile substation. However, due to the small internal insulation size of the compact HTS transformers, it is necessary to improve the insulation strength to ensure the insulation safety of the transformer. Reasonable main insulation structure can greatly improve the insulation level of transformer. Based on the design theory of main insulation structure, this paper designs a main insulation structure model "small liquid nitrogen gap—barrier" suitable for compact HTS transformer. The insulation withstand voltage experiment of the main insulation structure shows that when the liquid nitrogen gap distance is less than 8 mm, the insulation strength of liquid nitrogen in the structure is improved. When the liquid nitrogen gap distance is too small, the size and thickness of the barrier will affect the insulation strength of the structure. According to the insulation strength of main insulation structures with different liquid nitrogen gaps, the feasibility of "small liquid nitrogen gap—barrier" main insulation structure is verified. The small liquid nitrogen gap structure can be adopted for the main insulation of compact HTS transformer. [ABSTRACT FROM AUTHOR]

State estimation is critical for railway power supply systems (RPSSs). Pseudo‐measurement is commonly used in state estimation. However, the fluctuations of renewable generations and railway traction loads in RPSS may introduce data noise, which will jeopardize the accuracy of the generated pseudo‐measurements and thus impact the state estimation. Additionally, when learning the historical measurement data sequences, the traditional pseudo‐measurement model is likely to have overfitting, which will further impact the accuracy of pseudo‐measurements, thereby affecting the accuracy of state estimation. To address these issues, this paper proposes a high‐accuracy pseudo‐measurement‐based state estimation approach for RPSSs. Firstly, a denoising autoencoder‐based method is used to mitigate the impact of data noise on the accuracy of pseudo measurements, and a gated recurrent unit‐based method is used to adaptively learn the historical measurement data sequence, thereby improving the accuracy of pseudo measurements. Next, the pseudo‐measurement weights are obtained by generating pseudo‐measurement variances using the Gaussian mixture model. Finally, the pseudo measurements and real‐time measurements are integrated by weighted least squares to realize the state estimation of RPSS. The effectiveness and accuracy of the proposed method are verified by simulation on a modified IEEE 33‐node system which includes a railway traction substation and renewable generations. [ABSTRACT FROM AUTHOR]

In the hydrogen‐based integrated energy system (HIES), there exists a hydrogen trading market where hydrogen producers and consumers are distinct stakeholders. Current research in hydrogen trading predominantly focuses on high‐cost green hydrogen (GH), which is not aligned with the current trend of utilizing hydrogen from multiple sources. To address this, this paper proposes a hydrogen trading strategy between the virtual hydrogen plant (VHP) and electro‐hydrogen energy system (EHES) based on a bi‐level model, considering the synergy of GH produced from electrolyzers and blue hydrogen (BH) derived from natural gas in the HIES. In the VHP level, the objective is to maximize profit from hydrogen sales, allowing for the determination of hydrogen prices. In the EHES level, the goal is to minimize the cost of energy supply, leading to the formulation of GH and BH purchasing plans based on hydrogen prices. Additionally, this paper incorporates a risk‐averse model from the information gap decision theory (IGDT) to account for the impact of wind power output uncertainties in the VHP level. Subsequently, leveraging the Karush–Kuhn–Tucker (KKT) conditions of the EHES level, the bi‐level problem is transformed into a solvable single‐level mathematical program with equilibrium constraints (MPEC), with the non‐linear equilibrium constraints linearized. The proposed bi‐level optimization model is validated through case studies encompassing industrial and residential hydrogen utilization within the HIES. The outcomes confirm the rationality of the proposed model, demonstrating that, in comparison to exclusively trading GH, the coordinated GH and BH trading can increase the profit of the VHP by 2.7% and reduce the costs of the EHES by 8.5%. [ABSTRACT FROM AUTHOR]

Power transformers play a critical role in the performance of power systems. This equipment is costly due to significant copper and iron prices and manufacturing costs. Therefore, maintenance and protection of such equipment is essential. Despite its robust performance, maloperation of differential protection (DP) in transformers may cause operational challenges to power system operators. The differential relay may operate incorrectly after the transformer energization leads to an inrush current (IC) and the relay identifies the event as an internal fault, and consequently issues the trip command. The other case of maloperation includes, but not limited to, a moment when the current transformer saturates due to an external fault. In this paper, a novel approach for DP is proposed, that is based on signal processing methods. In this paper, variational mode decomposition (VMD) and the deep neural network are implemented by using the convolutional neural network (CNN) and bi‐directional long short‐term memory (BiLSTM) models. The VMD decomposes differential current signal (DCS) to intrinsic mode functions with corresponding narrow‐band property frequency spectrums, which provides more detailed information about signal characteristics in different frequency bands. At the next stage, an effective feature for the BiLSTM is extracted by the CNN with the convolutional layers to classify events and proper discrimination. Extensive simulations on a 500 MVA transformer in MATLAB demonstrate the effectiveness of the proposed protection approach to differentiate ICs from internal and external faults with 99.8% accuracy in less than 1/8th of a power cycle. [ABSTRACT FROM AUTHOR]

Increasing the penetration level of distributed generation (DG) units requires overcoming the technical challenges associated with their integration into the distribution systems, especially protection problems. Change in the current profile of the distribution system due to the presence of DG units disrupts the operation of the conventional fuse saving coordination (FSC) scheme. The first objective of this paper is to provide an overview of the state‐of‐the‐art of FSC schemes in distribution systems with distributed generators that has not been systematically presented yet. In addition to comparing the features of reliability, cost, speed, implementation, calculation burden, and requirements, the impact of presence of distributed generations on the performance of the conventional FSC scheme is investigated in details. The second objective of this paper is to propose an FSC restoration scheme for minimizing the challenges of previous works. Using a quasi‐voltage current term, the proposed scheme modifies the adjustable time coefficient of the recloser in two ways of pro and plus. The former scheme provides an approximate FSC with a simple setting while the latter scheme provides complete coordination at the expense of a more complex setting. No need for voltage measurement makes its implementation practical in available distribution systems. The effective performance of the proposed FSC scheme is verified through extensive simulation studies in the ETAP environment. [ABSTRACT FROM AUTHOR]

A power line carrier (PLC) communication characteristics‐based method is proposed for single‐phase‐to‐ground fault location in neutral isolated medium voltage meshed distribution networks in this paper. The carrier signals with a time‐varying frequency and constant amplitude are processed by a set of PLC transmitters and receivers, whose placement is optimized by regarding the power network as an undirected graph. Two signal encoding and decoding algorithms for the PLC terminals are proposed to avoid using expensive timing systems between the terminals. The fault location technique is implemented by comparing the cosine similarity of amplitude attenuation and phase offset between the fault and a feature library. The node corresponding to the maximum cosine similarity of the characteristics between the present fault and the library is selected as the location of the current fault. Only one set of low‐cost PLC communication terminals and the widely available power lines are needed in the fault location system, making this approach highly practical. Numerical simulations using MATLAB/Simulink have been performed to verify the technique's feasibility. The results show that the method can accurately locate faults in neutral isolated medium voltage meshed distribution networks. Besides, the presented approach achieves a high level of accuracy in estimating transition resistance values. [ABSTRACT FROM AUTHOR]

Stability issues can significantly increase the risk of hybrid microgrids (HMGs), particularly during island mode operation. The dynamic performance of the system can induce constraints and stability margins that may elevate the loss of load probability. This paper presents a new stability‐oriented risk assessment model that bridges the conventional reliability models, stability, and system risk. The proposed model ensures the risk of the system by considering the redesign or reconfiguration of HMGs to address stability issues. First, the interlinking converters (ICs) DC‐link voltage stability is analysed to determine the acceptable power flow margins in rectifying and inversion mode. Next, the new general risk assessment model is introduced. The results show that the stability margin significantly increases the risk of the HMG, particularly when considering the aging of converters. The study also examines the impact of various load characteristics and ICs with different numbers but the same total size. In some cases, the risk is acceptable for the desired loads, or it can be reduced to an admissible level by reconfiguring the ICs. Finally, the paper demonstrates the effectiveness of the proposed model in the optimal design of HMGs, aiming to guarantee the system's risk. [ABSTRACT FROM AUTHOR]

The aggregation of the remaining battery capacity of electric vehicles (EVs) can be used as distributed energy storage to participate in the microgrid optimisation through vehicle‐to‐grid (V2G) technology. However, the reliability of this service to be delivered is affected by the uncertainty of EVs' behaviour. The un‐reliable service will bring risks in the operation of microgrid when EVs' V2G electricity is regarded as an important flexibility resource. This paper, first proposes an analytical method to quantify the reliability of EV aggregation's (EVA's) V2G electricity based on the analysis of historical charging data and compound Poisson process. Based on this model, electric vehicles aggregators can evaluate the V2G bid quantity for any time slot on day t+1 according to the reliability requirements. Secondly, an optimal operation model of microgrid with consideration of V2G's reliability is considered. Finally, a test system with photovoltaics (PVs) and EVA on top of the original IEEE 33‐node system is used to verify the effectiveness of the proposed model. The results show that with the proposed reliability evaluation method of V2G electricity, the optimal operation of the microgrid can be reached with appropriate evaluation of the capability of the EVA. [ABSTRACT FROM AUTHOR]

The phase‐locked loop (PLL) is a critical control module applied in the control system of renewable energy sources (RESs) to synchronize with the grid voltage. When a fault occurs, the dynamic response process of the PLL will generate a phase locking error, resulting in a mass of harmonic components in the fault current of the PV inverter, which further poses challenges to transformer differential protection. To address the challenges posed by the phase locking error in practical engineering applications, this paper proposes an improved scheme that uses a digital computer algorithm to record and store the pre‐fault voltage and introduces the limiting coefficient. Firstly, the memory voltage is used to eliminate the phase locking error of the PLL, thereby mitigating harmonic distortion in the fault current of the RESs and ensuring the reliability of the transformer differential protection. In addition, the limiting coefficient is introduced to eliminate the effect of the increased amplitude of the fault current caused by the memory voltage. The voltage reference value of the inverter is multiplied by an appropriate limiting coefficient k and then output to the physical system. Finally, the effectiveness of the proposed scheme is verified by MATLAB/Simulink simulation. [ABSTRACT FROM AUTHOR]

The rise of distributed energy resources has empowered consumers to become prosumers, generating their own electricity. This trend has led to the development of peer‐to‐peer (P2P) energy trading, where P2P participants trade energy among themselves. Since the integration of P2P energy trading can influence retail markets in distribution systems, the focus is on its effects on retail markets. Therefore, this paper proposes a method to determine the maximum P2P penetration levels on distribution systems while considering the effects on the benefits of stakeholders, including P2P participants, retail customers, and distribution system operators. The proposed method also assesses the impact of P2P energy trading on two schemes: the impact on buy‐from‐grid prices for retail customers and the impact on social benefits. The analysis revealed three distinct zones of photovoltaic and P2P penetration: the P2P restricted zone, the P2P with curtailment zone, and the P2P free trading zone. By examining these zones, the maximum P2P penetration levels—which ensure that buy‐from‐grid prices and social benefits remain within acceptable thresholds—can be determined. This study enables DSOs to find the maximum P2P penetration level at which a balance of stakeholders' benefits can be achieved and non‐beneficial effects on retail customers do not occur. [ABSTRACT FROM AUTHOR]

With the increasing integration of distributed energy resources (DERs) into distribution systems, the optimization of system operation has become complex, facing challenges such as inadequate consideration of market participants' benefits, poor computational efficiency, and data privacy concerns. This paper introduces the concept of a virtual power plant (VPP) as a solution for energy integration and management. To strike a balance between operational safety and the interests of market participants, a dual‐layer model is proposed. This model considers the benefits of both Distribution System Operators (DSO) and VPP, while also enhancing the consideration of distribution network constraints. The DSO considers AC optimal power flow and utilizes penalty functions to ensure network security in case of violations. To enhance computational efficiency and privacy, the paper presents the parameter‐sharing twin delayed deep deterministic policy gradient approach. This approach allows multiple intelligent agents to share a neural network model, effectively reducing the computational load. During the training process, only essential data is exchanged among the agents, ensuring the privacy of sensitive information. The effectiveness of the proposed model and the algorithm is validated through a case study on an IEEE 33‐node system. [ABSTRACT FROM AUTHOR]

The multi‐microgrids operation can greatly improve the proportion of renewable energy integration and power reliability of rural microgrids through energy trading between adjacent microgrids. Therefore, this paper proposes an optimization method for the low‐carbon economic operation of rural microgrids which contain wind power, photovoltaic, biogas, and other common rural renewable energy sources. Using the asymmetric Nash bargaining model which can form the non‐linear energy mapping function to quantify the bargaining power of each microgrid to establish the multi‐microgrids energy trading model, and the non‐convex trading optimization problem is equivalently transformed into two convex optimization subproblems, subproblem 1 is microgrids alliance costs containing the emission costs, and subproblem 2 is cooperative benefits distribution. Then, the accelerated Alternating Direction Method of Multipliers (ADMM) method is used to solve subproblem 1 and subproblem 2, respectively, and the privacy of transaction information is also protected. The results show that: compared with the single‐microgrid operation, the combined operation of rural multi‐microgrids with biogas can greatly improve the renewable energy consumption rate, reduce carbon emission, and improve the profit income of the alliance and each microgrid. Meanwhile, the accelerated ADMM algorithm used can greatly improve the solution speed. [ABSTRACT FROM AUTHOR]

Fast and accurate fault location in DC power systems is of particular importance to ensure their reliable operation. One of the approaches for implementing a fast‐tripping protection scheme is to use Traveling waves (TW) initiated by a fault scenario. This paper proposes a physics‐informed machine learning approach that utilizes TWs for fault location in DC microgrids. TWs are extracted by the so‐called multiresolution analysis which identifies the TW's wavelet coefficients for multiple frequency ranges. This paper deploys Parseval's theorem to find the energy of wavelet coefficients as a quantitative metric for describing TWs. The hypothesis of this paper is that once the Parseval energy curves for a specific cable are extracted, they can be utilized to locate faults along with that cable regardless of the DC system in which the cable is deployed. The fault location algorithm uses Parseval energy curves to train a Gaussian Process (GP) estimator. With the Parseval energy values of measured current at the protection device location, the GP estimator is able to estimate fault locations with high accuracy. The effectiveness of the proposed algorithm is verified by simulating a DC microgrid system in PSCAD/EMTDC. [ABSTRACT FROM AUTHOR]

Due to intermittent renewable energy and fluctuating load demand, distribution networks with renewable distributed generation (DG) installations are more likely to suffer voltage issues and significant power losses. The performance of conservation voltage regulation (CVR) schemes may be adversely affected by the undesirable voltage profile at specific nodes. This paper aims to reduce power losses in CVR‐implemented networks by optimally planning new renewable DGs without changing the existing ones. A scenario‐based optimal renewable DG planning model is proposed with a novel scenario formation method. The uncertainties of load demand and renewables are captured jointly and formed into a finite number of scenarios based on a multivariate Gaussian mixture model (MultiGMM). The locations and capacities of different types of new renewable DGs are optimally planned for CVR performance improvements on power loss saving by aggregating the operation status and probabilities of the scenarios using mixed‐integer non‐linear programming (MINLP). A time‐series simulation is formulated for accuracy verification. The results of case studies show that the proposed model can significantly reduce power losses, active load demand, and reactive load demand. The accuracy of the planning results can be guaranteed with fewer scenarios compared to a widely used classical scenario‐based planning method. [ABSTRACT FROM AUTHOR]

During the operation of the ITER machine, hundreds of MW/Var of active and reactive power will be exchanged with the grid. The E‐STATCOM scheme composed of the Modular Multilevel Converter (MMC) and split supercapacitor energy storage has been proposed to improve the power compensation performance of the existing reactive power compensation system in the previous study. However, one of the main technical challenges which is lack of research is to precharge all submodule capacitors and supercapacitors from zero to their nominal voltage values efficiently during a startup process. As the capacitance and operating voltage of supercapacitors are much different from capacitors in each submodule, the startup of E‐STATCOM is a more complicated process. To coordinate the energy exchange between submodule capacitors and supercapacitors, submodule capacitors and the grid, this paper presents an optimized four‐stage AC side startup strategy for the E‐STATCOM. The proposed method minimizes the use of current‐limiting resistors while suppressing the surge current in the zero‐voltage startup process of supercapacitors, in addition to optimizing the energy consumption. The pulse current charging, constant current charging and constant power charging strategies of supercapacitors are adopted in different charging stages, and the detailed coordinated control scheme between submodule capacitors and supercapacitors are described and analyzed. The effectiveness and performance of the proposed method are verified by simulation results and hardware‐in‐the‐loop (HIL) experiments. [ABSTRACT FROM AUTHOR]

Most of the existing methods for harmonic analysis are from frequency‐domain perspective. In fact, the essential factor for generating harmonics is non‐linear characteristic or time‐varying property. Therefore, the harmonic generation mechanism and the harmonic source location method are investigated from the time domain perspective in this paper. Firstly, a general model of non‐harmonic sources is established. The non‐harmonic sources will match well with the proposed general model while the harmonic source will not. Then correlation coefficient that reflects compliance degree between each device and the general model is defined for distinguishing harmonic sources from non‐harmonic sources. On this basis, a novel time‐domain harmonic source location method is proposed. Numerous simulations and experiments have demonstrated that the proposed method has good performance under fluctuations, saturations, pre‐distortions, transient process, and resonances. The defined correlation coefficient can reflect non‐linearity/time‐varying degree of the harmonic source, which can be used for evaluating harmonic emission level of each harmonic source. On this basis, a simple harmonic responsibility division method is proposed, which is immune to possible fluctuations, pre‐distortions, saturations, resonances, and impedance variation. [ABSTRACT FROM AUTHOR]

In order to improve the measurement accuracy of mutual inductance parameters of transmission lines in the environment of double circuit power lines without power outage, this paper establishes simulation models for measuring mutual inductance parameters of transmission lines using the different frequency method in two modes: equal and unequal zero sequence self‐parameters of two circuit lines, using a parallel zero sequence coupling model of double circuit power lines. In the article, simulation analysis is conducted on the line parameters with a coupling coefficient between 0.4 and 0.6 and a line length of 20–50 km. In order to further verify the correctness of the simulation model and measurement methods, a test bench was established based on the principle of line mutual inductance parameter testing in a laboratory dual circuit line without a power outage environment for experimental testing. By comparing the test values under experimental conditions with the standard values, it has been proven that the model and method can meet the actual measurement requirements of engineering. [ABSTRACT FROM AUTHOR]

The high uncertainty of wind power output greatly affects the rapid reactive power optimization of power systems. This paper proposes a neural network‐based comprehensive reactive power optimization method for large‐scale wind power grids, effectively addressing the challenges of rapid reactive power optimization in power systems. Firstly, by constructing typical wind‐power‐load scenarios, the generalization ability of the neural network is improved. Then, focusing on the comprehensive reactive power optimization problem after integrating typical wind‐power‐load scenarios into the system, the improved Harris hawks optimization algorithm (HHO) is compared with the particle swarm optimization algorithm and traditional HHO algorithm, highlighting its advantages. Finally, HHO is utilized for solving, thereby constructing a comprehensive reactive power optimization strategy tag set. Furthermore, through deep fitting of the neural network between the power grid operating state and the comprehensive reactive power optimization strategy, the computational complexity and decision‐making time of reactive power optimization are reduced. [ABSTRACT FROM AUTHOR]

This paper emphasizes the integration of wind and photovoltaic (PV) generation with battery energy storage systems (BESS) in distribution networks (DNs) to enhance grid sustainability, reliability, and flexibility. A novel multi‐objective optimization framework is introduced in this study to minimize energy supply costs, emissions, and energy losses while improving voltage deviation (VD) and voltage stability index (VSI). The proposed framework comprising normal boundary intersection (NBI) and decomposition‐based evolutionary algorithms (DBEA) determines the optimal siting and sizing of renewable‐based distributed resources, considering load demand variations and the intermittency of wind and solar outputs. The comparative analysis establishes that the proposed strategy performs better than many contemporary algorithms, specifically when all the objective functions are optimized simultaneously. The validation of the proposed framework was carried out on the standard IEEE‐33 bus test network, which demonstrates significant percentage savings in energy supply costs (49.6%), emission rate (62.2%), and energy loss (92.3%), along with enormous improvements in VSI (91.9%) and VD (99.8953%). The obtained results categorically underline the efficiency, reliability, and robustness of the proposed approach when employed on any complex distribution network comprising multiple renewable energy sources and battery storage systems. [ABSTRACT FROM AUTHOR]

There is a change in the traditional power system structure as a result of the increased incorporation of microgrids (MGs) into the grid. Multi‐area MGs will emerge as a result, and issues related to them will need to be addressed. Load frequency control (LFC) is a challenge in such structures, which are more complicated due to variations in demand and the stochastic characteristics of renewable energy sources. This paper presents a cascade fuzzy active disturbance rejection control technique to deal with the LFC problem. In order to tune different parameters of controllers, a newly developed heuristic algorithm called the Gazelle optimization algorithm (GOA) is also employed. Moreover, due to the fact that multi‐area MGs are regarded as cyber‐physical systems (CPSs), a relatively new concern for LFC problems is their resilience to cyberattacks such as false data injection (FDI) and denial of service (DoS) attacks. Therefore, this research also presents a novel machine learning approach called parallel attack resilience detection system (PARDS) to deal with the LFC problem in the presence of cyberattacks. The efficiency of the proposed strategy is investigated under different scenarios, such as non‐linearities in the power system or server cyberattacks. [ABSTRACT FROM AUTHOR]

This paper presents various control strategies to improve operations in two interconnected areas connected by a VSC‐HVDC transmission line. The main focus is on designing a central control system (CCS) that coordinates control units in both areas. In area 1, an AC voltage control unit is connected to the CCS. In area 2, three control units including a load power control unit, a fault detection unit, and an AC voltage control unit are also connected to the CCS. The CCS receives inputs from these units and generates commands for the DC voltage and active/reactive power control units on both sides of the DC line. The first proposed strategy addresses permanent voltage drops caused by load fluctuations in area 2. It adjusts the transmitted power from area 1 based on voltage variations in area 2. The second strategy focuses on mitigating faults in area 2 by injecting active and reactive power from area 1 during such events. The third strategy resolves transient voltage oscillations in both areas by controlling the reactive power of stations on either side of the DC line. Simulations using MATLAB‐SIMULINK demonstrate that these mechanisms successfully achieve their objectives. [ABSTRACT FROM AUTHOR]

Microgrids play a pivotal role in modern power distribution systems, necessitating precise control methodologies to tackle challenges such as performance instability, especially during islanding operations. This paper introduces an advanced control strategy that employs artificial intelligence, specifically deep neural network (DNN) predictions, to enhance microgrid performance, particularly in an islanding mode where voltage and frequency (VaF) deviations are critical concerns. By utilizing real‐time data and historical trends, the proposed controller accurately forecasts power demand and generation patterns, enabling proactive planning and optimization of efficiency, reliability, and sustainability in microgrid management. One significant aspect of this approach is to establish an intelligent distributed control system that minimizes reliance on communication devices while ensuring that VaF remains within acceptable limits. Moreover, it consolidates the roles of primary and secondary controllers within the microgrid and facilitates the prediction of load changes and load injection processes. This capability significantly reduces microgrid VaF deviations, enhancing system performance through precise power distribution and balanced coordination among distributed generators. Consequently, it ensures the stability and reliability of the system. In summary, the integration of DNN‐based predictive control represents a significant advancement in microgrid management, providing a solution to address performance challenges and optimize operational efficiency, reliability, and sustainability. [ABSTRACT FROM AUTHOR]

This paper sets out to develop an efficient probabilistic optimal power flow (POPF) algorithm to assess the influence of wind power on power grid. Given a set of wind data at multiple sites, their marginal distributions are fitted by a newly developed generalized Johnson system, whose parameters are specified by a percentile matching method. The correlation of wind speeds is characterized by a flexible Liouville copula, which allows to model the asymmetric dependence structure. In order to improve the efficiency for solving POPF problem, a lattice sampling method is developed to generate wind samples at multiple sites, and a logistic mixture model is proposed to fit distributions of POPF outputs. Finally, case studies are performed, the generalized Johnson system is compared with Weibull distribution and the original Johnson system for fitting wind samples, Liouville copula is compared against Archimedean copula for modelling correlated wind samples, and lattice sampling method is compared with Sobol sequence and Latin hypercube sampling for solving POPF problem on IEEE 118‐bus system, the results indicate the higher accuracy of the proposed methods for recovering the joint cumulative distribution function of correlated wind samples, as well as the higher efficiency for calculating statistical information of POPF outputs. [ABSTRACT FROM AUTHOR]

The paper presents a new method for estimating the contribution of distortion sources based on the application of passive harmonic filters. The method does not require the measurement of harmonic network impedance and is based on the measurement of harmonic currents of the grid, consumers and passive harmonic filters. Evaluation of the consumer contribution using a passive harmonic filter is necessary to select the parameters and connection points for harmonic reduction devices. A feature of the method is the correct determination of share contributions, regardless of background harmonic distortions. Based on this method, a single consumer can evaluate both the harmonic contributions of its own loads, even in the presence of background distortions, and the harmonic voltage distortions in the case of installing harmonic reduction devices. The research results are confirmed in laboratory conditions with various combinations of electrical loads connected both at the grid side and at the consumer side. For such conditions, the proposed method was compared with existing methods, among which are methods based on the measurement of harmonic voltage vectors, harmonic current vectors and active harmonic power. The application of the developed method was demonstrated using the example of a gas production field. [ABSTRACT FROM AUTHOR]

With the continuous growth of electricity demand, the safe and stable operation of distribution lines is crucial for power transportation. Unmanned aerial vehicle (UAV) inspection has been widely used for the maintenance and repair of distribution lines. Due to the limitations of computational power and endurance, it is difficult for UAVs to independently complete data processing. Combined with mobile edge computing (MEC), this paper proposes a computing offloading strategy based on multi‐agent reinforcement learning and double‐layer offloading mechanism, which can further utilize the computing power of non‐task devices and edge servers. Firstly, three‐layer system architecture, named MEC‐U‐NTDC (MEC‐UAV‐Non‐task Device Cloud), is built. Secondly, double‐layer offloading mechanism is designed to comprehensively utilize the computing power of edge servers and neighbouring non‐task devices. Finally, a multi‐agent algorithm DLMQMIX is proposed to minimize the total cost for UAV inspection. Simulation experiments show that the proposed algorithm can effectively solve the task offloading problem of UAV‐aided distribution line inspection, and compared with algorithms such as PSO, GA, and QMIX, it performs better in terms of average delay, system cost, and load balancing, achieving a smaller total system cost. [ABSTRACT FROM AUTHOR]

Uncertainty analysis deals with the fluctuations and unpredictability of the electrical power generated from renewable resources (RRs), such as solar PV and wind energy systems. This paper gives an insight into various techniques used for the uncertainty analysis and a probabilistic Monte Carlo Simulation is applied for modelling the uncertainties concerned with RRs and electric vehicle (EV) load in the MATLAB platform. The uncertainty associated with the price sensitivity of EV charging and the state of charge of EVs is taken as a prime factor for analysis in the present work. Despite the fluctuations and unpredictability of electricity generation and consumption, the considered system ensures that the total amount of electricity supplied by solar PV, wind and grid matches the total amount of electricity demanded by EV load. Rao‐1, Rao‐2 and Rao‐3 algorithms are applied in this work to optimize the operation cost of charging stations under uncertain conditions and without any uncertainties. The results obtained without uncertainties by Rao algorithms are compared with the existing particle swarm optimisation method. In the presence of uncertainties, Rao‐1 and Rao‐2 algorithms are compared with Rao‐3 and it is found that the Rao‐3 algorithm performed better. [ABSTRACT FROM AUTHOR]

Cloud energy storage system (CESS) technology is a novel idea to eliminate the distributed energy storage systems from the consumers into a cloud service centre, where CESS acts as a virtual energy storage capacity instead of the actual devices. This combination forms a grid-forming battery-supercapacitor cloud hybrid energy storage system (CHESS) which is responsible for maintaining the voltage stability and power balance at the common DC bus of the multiple NG system. By establishing such an access to CESS, the proposed model allocates optimal shares of charge/discharge capacities for home owners, minimizes the daily operation cost of each home and grants an optimal operation of household appliances. [Extracted from the article]

Based on a practical long‐distance large‐capacity transmission engineering case, the small‐signal stability of fractional frequency transmission system (FFTS) with Y‐connected modular multi‐level converter (Y‐MMC) is mainly researched in this paper. Different from the previous control strategies of Y‐MMC, this paper establishes a frequency decoupling mathematical model and proposes the decoupling control strategies. Then, the small‐signal model of the Y‐MMC system is obtained. Considering the existence of phase locked loop (PLL) will deteriorate the stability of the system under weak grid, this paper applies the short‐circuit ratio (SCR) for analysis and proposed a new structure of PLL, called phase‐shifted PLL (PS‐PLL), to improve the small‐signal stability of the system. In addition, for better stability and dynamic response performance of the closed‐loop control system, this paper proposes a new parameter optimization objective function for parameters adjustment. Controller parameters optimization is conducted by using the particle swarm optimization (PSO) algorithm and stability evaluation of the system is conducted based on the eigenvalue distribution. Finally, the feasibility and superiority of the proposed strategies and optimization are verified in MATLAB/ Simulink. [ABSTRACT FROM AUTHOR]

This paper summarizes our recent work on Grid‐Forming Inverter (GFM) application to power systems. We have developed a novel design of GFM, a single‐phase synchronous inverter (SSI) for the conventional 100/200V distribution network based on the concept of "non‐interference core (NIC) dynamic model." This paper first explains the design concept of NIC‐SSI and a simulation model of SSI for power system analysis. Then the stabilization effect is investigated, where the installation of SSI on the single‐phase consumer side is assumed as a new concept. The improvement of frequency and transient stability are evaluated. The SSI model is verified by comparing the developed root mean square (RMS) simulation, hardware‐in‐the‐loop (HIL) simulation, and the experiment using SSI hardware. The simulation results show that the SSI has the considerable ability of grid stabilization. Singlephase micro‐grid (SMG) operations using SSIs are also presented. The effectiveness of SMG operations is shown based on laboratory experiments. [ABSTRACT FROM AUTHOR]

Renewable energy sources (RES) are increasingly being developed and used to address the energy crisis and protect the environment. However, the large‐scale integration of wind and solar energy into the power grid is still challenging and limits the adoption of these new energy sources. Microgrids (MGs) are small‐scale power generation and distribution systems that can effectively integrate renewable energy, electric loads, and energy storage systems (ESS). By using MGs, it is possible to consume renewable energy locally and reduce energy losses from long‐distance transmission. This paper proposes a deep reinforcement learning (DRL)‐based energy management system (EMS) called DRL‐MG to process and schedule energy purchase requests from customers in real‐time. Specifically, the aim of this paper is to enhance the quality of service (QoS) for customers and reduce their electricity costs by proposing an approach that utilizes a Deep Q‐learning Network (DQN) model. The experimental results indicate that the proposed method outperforms commonly used real‐time scheduling methods significantly. [ABSTRACT FROM AUTHOR]

This paper presents a method for optimal reconfiguration of smart grids following the occurrence of short circuit faults. Due to restoration delays, the aim of the proposed approach is to save the maximum possible number of loads by forming stable islands and serving loads with Distributed Energy Resources (DERs). The islanding plan aims to prevent island instability and to help DERs continue supplying the maximum number of loads by the optimal network reconfiguration. Fault isolation is carried out by the protection system and the proposed procedure is commenced right after the fault isolation by controlling the condition of the network remote‐controlled switches. The proposed islanding plan is a novel method by this paper in the management of the postfault conditions of smart grids. Furthermore, a Q‐learning reinforcement approach is presented as the optimization tool because of its great capability and fast response for the determination of optimal reconfiguration. Numerous simulation tests for various fault locations on a 6‐bus and a 33‐bus test networks show the effectiveness of the proposed method in the improvement of postfault network reliability and sustainability. [ABSTRACT FROM AUTHOR]

Voltage stability assessment based on machine learning has become an important challenge in power systems. This paper presents real‐time short‐term voltage stability (STVS) assessment based on phasor measurement unit (PMU) data and machine learning (ML). The database is created through time series of measurement data to involve system time‐temporal and dynamics. Then multiple operating states of the power system are classified through the calculation of the Lyapunov exponent and dynamic voltage index according to the database. This paper presents a weighted combination of random forest (RF) and LightGBM (LGBM) classifiers to train a time‐series database. One of the main advantages of this paper is using the gradient concept in data preprocessing, which has enhanced performance metrics and reduced the defect of data noise. Also, hyperparameter optimization is conducted to improve machine performance. Studies on the IEEE 118bus and a real local grid (RLG) demonstrate that the proposed method improves the performance metrics such as accuracy and F1‐score. Also, this approach is robust against PMU data noise and topology changes in the network. [ABSTRACT FROM AUTHOR]

Deteriorated power system components have a higher probability of failure than new components. Still, the reliability of supply analyses traditionally models all components of the same type with the same probability of failure, and thus neglects the effect of deteriorated components. This paper presents a methodology to integrate a condition‐dependent component probability of failure model into a power system reliability analysis. The component state is described by a semi‐Markov process, and the paper shows how this, under reasonable assumptions, can be approximated by a Markov process. The Markov assumption simplifies the analysis and allows the model to include preventive retirement and be calibrated to statistical data. A case study using statistical data for Norwegian power transformers shows that, in the Norwegian power system, the proportion of failures that are due to the poor condition is small, partly due to the common strategy of preventive retirement. However, if the condition of the transformers were worse, the impact of poor conditions can be considerable. The methodology further enables the identification of the transformers that contribute most to the risk to the reliability of supply. The paper thus highlights the importance of accounting for the component condition in strategic decisions such as long‐term renewal planning [ABSTRACT FROM AUTHOR]

The high‐voltage direct current (HVDC) power transmission short‐circuit fault protection is a big challenge, and it is the main obstacle to promote the HVDC multi‐terminal networks. A natural commutation current topology (NCCT) of hybrid HVDC circuit breaker (DCCB) integrated with limiting fault current is proposed in this paper, which shares several obvious merits, such as lower peak fault current, shorter fault isolation time and low turn‐off loss. The main contributions in this paper are made as follows. (1). A second‐order RLC circuit in novel NCCT circuit breaker is utilized as the current limiting circuit to dramatically reduce the fault current rising slope and its peak value. (2) A asynchronous NCCT circuit breaker has been investigated to broaden the proposed NCCT circuit breaker's optimal working area. (3) By taking China Zhangbei 500 kV four‐terminal DC grid as an example, an optimization design technique of the asynchronous NCCT‐DCCB is developed to demonstrate the process of the theoretical analysis and parameter design. The correctness of the proposed NCCT‐DCCB and the feasibility of the optimization design technique are confirmed by EMT simulation on PSCAD/EMTDC and hardware‐in‐loop experiment on PLECS‐RtBox. [ABSTRACT FROM AUTHOR]

Earth faults is a challenging fault type to locate in resonant grounded networks due to their naturally low fault current, and the problem increases with an increased fault impedance. This paper describes the detailed implementation and laboratory testing of a method for detection, location and clearing of earth faults with very small fault currents. The method consists of two indicators used in the fault detection stage, where their simultaneous operation ensures selective fault detection and faulty feeder selection. One of these indicators also enables continuous fault indication throughout a sectionalizing process. The laboratory tests demonstrate that both indicators function as intended, and it is the current sensors which ultimately limit the attainable sensitivity. Faults up to 15 kΩ were detected successfully in the laboratory network based on phase current measurements, while the sectionalizing indicator showed much higher sensitivity and functioned as intended in a 50 kΩ fault. Measurements from one field test in a 22 kV network corroborate the laboratory results and demonstrate the expected earth fault indicator response. [ABSTRACT FROM AUTHOR]

Peak‐valley period partition of load curve is a key aspect of time‐of‐use (ToU) tariff to improve power load characteristics, such as shifting peak loads towards valley time periods. Fuzzy clustering algorithm is an effective and popular method commonly used to solve the peak‐valley period partition of load curves, but it still encounters the difficulty of dividing some data within the boundary regions of different time periods. Therefore, this paper presents a peak‐valley period partition and abnormal time correction scheme for ToU tariffs under typical daily load curves based on improved fuzzy C‐means (FCM) clustering algorithm. In order to improve the accuracy of peak‐valley period partition, modified fuzzy membership functions are proposed to improve the initialization of FCM clustering, and a loss function‐based method is presented for calculating the fuzzy parameters of those membership functions. To resolve the problem of abnormal time partitioning within the boundaries of different time periods, an abnormal time period recognition model and a correction model based on fuzzy subsethood are proposed to obtain the final corrected peak‐valley time period partitioning results. On the MATLAB R2020b platform, the effectiveness of the proposed method is verified through two real daily load curves with a time resolution of 5 min. [ABSTRACT FROM AUTHOR]

The objective of this paper is to determine the transient characteristics and sites of the pre‐breakdown (pre‐BD) in the spark conditioning under power frequency voltage (PFV) in vacuum. A multi‐angle optical path system was designed and made the determination of the pre‐BD sites in spark conditioning possible, through one camera at two viewing angles. The experimental results indicate that, in the spark conditioning under PFV, the pre‐BDs continuously occurred at a random moment. Within several half‐waves, the number of the pre‐BDs could reach dozens of times, which was the key for the treatment of the electrode surface in conditioning. Under the application of PFV, the single pre‐BD occurred at a random moment, in which it would last for several microseconds and the peak value of the current would reach several amperes. Moreover, the pre‐BD sites randomly distributed in the surface of the electrode and almost covered the whole surface of the electrode. The pre‐BDs took place independently in both time and space, in which there should be no effect between each other of two sequential pre‐BDs. To sum up, the transient characteristics and the sites of the pre‐BDs determined in this paper could reveal the physical mechanism of the pre‐BD on the treatment of electrode surface in the conditioning process, which is quite significant to improve the BD voltage of vacuum interrupter. [ABSTRACT FROM AUTHOR]

A power system stabilizer (PSS) is a control system integrated into the control structure of specific generation units within AC grids. It monitors current, voltage, and machine shaft speed. Analysing these variables, the PSS generates appropriate control signals to the voltage regulator unit, aiming to damp system oscillations. With the advancement of high‐voltage direct current (HVDC) overlaid high‐voltage alternative current (HVAC) grids, it is anticipated that direct current power system stabilizers (DC‐PSS) will be developed to perform a similar role as their AC counterparts. DC‐PSS will be responsible for monitoring and controlling DC voltage levels, ensuring stable operations. This paper focuses on DC‐PSS in HVDC grids, designed to ensure stable operation and mitigate voltage fluctuations. Unlike conventional AC power systems, HVDC includes only DC voltage and power. The input signal for DC‐PSS is the variations in DC voltage, and the output signal is proportional to the power changes at the specific bus where the DC‐PSS is installed, aiming to minimize DC voltage oscillations. These characteristics pose significant challenges in DC‐PSS. The paper addresses the challenges and highlights issues such as inertia and low‐frequency oscillations associated with DC‐PSS. Various control methods are presented and a comparison is made among these methods. [ABSTRACT FROM AUTHOR]