Search

Increasing the penetration level of distributed generation (DG) units requires overcoming the technical challenges associated with their integration into the distribution systems, especially protection problems. Change in the current profile of the distribution system due to the presence of DG units disrupts the operation of the conventional fuse saving coordination (FSC) scheme. The first objective of this paper is to provide an overview of the state‐of‐the‐art of FSC schemes in distribution systems with distributed generators that has not been systematically presented yet. In addition to comparing the features of reliability, cost, speed, implementation, calculation burden, and requirements, the impact of presence of distributed generations on the performance of the conventional FSC scheme is investigated in details. The second objective of this paper is to propose an FSC restoration scheme for minimizing the challenges of previous works. Using a quasi‐voltage current term, the proposed scheme modifies the adjustable time coefficient of the recloser in two ways of pro and plus. The former scheme provides an approximate FSC with a simple setting while the latter scheme provides complete coordination at the expense of a more complex setting. No need for voltage measurement makes its implementation practical in available distribution systems. The effective performance of the proposed FSC scheme is verified through extensive simulation studies in the ETAP environment. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of the fault current contributions of small‐scale single‐phase photovoltaic inverters under grid‐connected operation and their potential impact on the protection of distribution systems. To conduct this analysis, an autotransformer‐based voltage dip generator is proposed as a means to test the photovoltaic inverters' contribution to short‐circuit currents. Laboratory tests are then performed to obtain the short‐circuit current contribution of eight single‐phase photovoltaic inverters. Using the short‐circuit current data obtained, a behaviour model is developed and simulated on Matlab‐Simulink. The model is then applied to a real distribution system and case studies are conducted to simulate the potential impacts on the protection system. Results indicate that while the massive penetration of small‐scale single‐phase photovoltaic inverters can alter the protection system's operating time, the impacts are not significant. Only in very specific scenarios, such as events related to high impedance faults, some impact can be observed. In these situations, the presence of photovoltaic inverters further complicates the already difficult task of identifying high impedance faults through conventional overcurrent protections. This study provides valuable insights into the integration of photovoltaic inverters into distribution systems, and can aid in the development of effective protection measures for future grid designs. [ABSTRACT FROM AUTHOR]

Integration of distributed generation systems and diversity of microgrid operations led to a change in the structure of the power system. Due to this conversion, new challenges have arisen when employing traditional overcurrent protection schemes. As a consequence, non‐classical protection schemes have attracted significant attention in the last few years. Engineers and scholars have proposed different non‐standard methods to increase the power protection system and ensure the highly selectivity performance. Although the non‐standard characteristics and their requirements, in general, have been outlined and analyzed in the available literature, protection coordination based on voltage current–time inverse, as a branch of non‐standard optimization methods, has not yet been thoroughly discussed, compared, or debated in detail. To close this gap, this review introduces a broad overview of recent research and developments of the voltage current–time inverse based protection coordination. Focuses on assessing the potential advantages and disadvantages of related studies and provide a classification and analysis of these studies. The future trends and some recommendations have been included in this review for improving fault detection sensitivity and coordination reliability. [ABSTRACT FROM AUTHOR]