Search

Control laws can be constructed in systems design by introducing parameters to obtain good system performance or robustness. Cai et al., in their paper 'Design of LPV controller for morphing aircraft using inexact scheduling parameters', establish a linear parameter-varying model for a morphing aircraft by Jacobian linearization. With such a model, Cai et al. investigate the design problem of gain-scheduled output-feedback controllers by using inexact scheduling parameters for morphing aircraft during the wing transition process. [Extracted from the article]

Concerning the problems that the traditional Convolutional Neural Network (CNN) ignores contextual semantic information, and the traditional Recurrent Neural Network (RNN) has information memory loss and vanishing gradient, this paper proposes a Bi‐directional Encoder Representations from Transformers (BERT)‐based dual‐channel parallel hybrid neural network model for text sentiment analysis. The BERT model is used to convert text into word vectors; the dual‐channel parallel hybrid neural network model constructed by CNN and Bi‐directional Long Short‐Term Memory (BiLSTM) extracts local and global semantic features of the text, which can obtain more comprehensive sentiment features; the attention mechanism enables some words to get more attention that highlights important words and improves the model's sentiment classification ability. Finally, the dual‐channel output features are fused for sentiment classification. The experimental results on the hotel review datasets show that the Accuracy of the proposed model in sentiment classification reaches 92.35% and the F1 score reaches 91.59%. [ABSTRACT FROM AUTHOR]

This paper considers the equilibrium‐free stability and performance analysis of discrete‐time nonlinear systems. Two types of equilibrium‐free notions are considered. Namely, the universal shifted concept, which considers stability and performance w.r.t. all equilibrium points of the system, and the incremental concept, which considers stability and performance between trajectories of the system. This paper shows how universal shifted stability and performance of discrete‐time systems can be analysed by making use of the time‐difference dynamics. Moreover, the existing results are extended for incremental dissipativity for discrete‐time systems based on dissipativity analysis of the differential dynamics to more general state‐dependent storage functions for less conservative results. Finally, it is shown how both these equilibrium‐free notions can be cast as a convex analysis problem by making use of the linear parameter‐varying framework, which is also demonstrated by means of an example. [ABSTRACT FROM AUTHOR]

A two‐player planar target defense game where the intruder attempts to breach the circular region guarded by the defender in the presence of a fixed line segment obstacle is addressed. Based on prior research, the entire game was divided into three phases to address the partial information problem. Additionally, the impact of obstacles on the game outcome is thoroughly analyzed. In contrast to the scenario without obstacles, this paper presents redesigned strategies for both defender and intruder, accompanied by quantitative results illustrating the influence on the winning probability. Finally, illustrative examples are given to demonstrate the effect of the obstacle. [ABSTRACT FROM AUTHOR]

This paper concentrates on presenting a reliable procedure to compute the stabilizing region of fractional‐order proportional integral derivative (FOPID) controllers for interval fractional‐order plants having an interval time delay. An interval fractional‐order plant is defined as a fractional‐order transfer function whose denominator and numerator coefficients are all uncertain and lie in specified intervals. Also, an interval time delay points to a delay term whose value varies in a specific interval. The D‐decomposition technique and the value set concept are employed to determine the stabilizing region of FOPID controllers. In this study, first, a theorem is presented to compute the boundary of the value sets of systems having interval time day. Then, a lemma is provided for robust stability analysis of the given closed‐loop control system. For a convenient use of the paper results, an algorithm is proposed to solve the problem of robustly stabilizing interval fractional‐order plants with an interval time delay using FOPID controllers. Finally, four examples are provided to illustrate the proposed procedure. [ABSTRACT FROM AUTHOR]

This paper proposes a novel solution to the problem of robust ripple‐free hybrid robust regulator ensuring the elimination of intersample ripples. The paper considers a structurally stable regulation approach in the hybrid framework. A regulator is designed using this technique under periodic sampling and is applied to the nonlinear model of a quadrotor. The control of unmanned autonomous vehicles has become a research topic that is important by itself, particularly in the case of multi‐rotor systems due to their versatility in various applications. Tracking a reference signal for such vehicles can be challenging, particularly when the frequency of communication is limited, or the control station is located far away. The proposed controller is hence tested for this challenging application. [ABSTRACT FROM AUTHOR]

This paper extends the characteristic ratio approach using novel inequalities to ensure zero/low overshoot for linear‐time‐invariant systems with zeros. The extension provided by this paper is based on the maximally‐flatness property of a transfer function, where the square‐magnitude of the transfer function is ensured to be a low‐pass filter. In order to be able to design low‐order/fixed structure controllers, a partial pole‐assignment approach is used instead of the full pole‐assignment used in the Characteristic Ratio Assignment (CRA) method. The developed inequalities and additional stability conditions are combined into an optimization problem using time domain restrictions when necessary. Although the method given in the paper is general, particular inequalities are developed for PI and PI‐PD controller cases, due to their frequent use in industrial applications. Similarly, First‐Order‐Plus‐Delay‐Time (FOPDT) and Second‐Order‐Plus‐Delay‐Time (SOPDT) systems are considered specifically, since most of the practical systems can be approximated by one of these types. The study is extended to plants with uncertainties where a theorem is developed to decrease computation time dramatically. The benefits of the proposed methods are demonstrated by several examples. [ABSTRACT FROM AUTHOR]

This paper is concerned with the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. In contrast to existing synchronization network models, the current study considers both internal time‐varying delays and coupling time‐varying delays. By analyzing the two factors (i.e. time‐varying delays and uncertainties) on the synchronization performance of stochastic uncertain complex dynamic networks, a new inverse optimal adaptive control is proposed. The analysis tool developed in this paper is based on Lyapunov technique, algebraic graph theory and inverse optimality, which does not need to solve Hamilton‐Jacobi‐Bellman equation. Some sufficient conditions are established for the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. To demonstrate the effectiveness of the present approach, simulation results are illustrated. In this paper, we consider the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. Different from the existing synchronization of the networks model, we take the internal time‐varying delays and the coupling time‐varying delays into account. By analyzing the two factors (i.e. time‐varying delays and uncertainties) on the synchronization performance of stochastic uncertain complex dynamic networks, a novel inverse optimal adaptive control is proposed. The analysis tool developed in this paper is based on Lyapunov technique, algebraic graph theory and inverse optimality, which does not need to solve Hamilton‐Jacobi‐Bellman equation. Some sufficient conditions are established for the synchronization of stochastic uncertain complex dynamic networks with time‐varying delays. [ABSTRACT FROM AUTHOR]

Advances in image processing technology have made it possible to measure the surface shape of the road ahead while driving. A new semi‐active suspension control method considering the forward road surface shape is proposed. A vehicle model equipped with a semi‐active suspension can be expressed as an mixed logical dynamical model. When the shape of the road ahead can be measured, the information on future disturbances is available before the vehicle undergoes. In this paper, the finite time optimization problem for the mixed logical dynamical model is formulated to consider the future disturbances as a mixed integer quadratic programming problem in the same way as the conventional control problem without future disturbance. However, the mixed integer quadratic programming problem is hard to obtain the control action within the control cycle period required in the real‐time vibration control with general computers for vehicles. In this paper, the reduction of the computational load is achieved by constructing an approximation function of the designed controller. A neural network is adopted for the approximation. The performance evaluation of the proposed method is evaluated by simulations. In the simulation study, the proposed method achieves better ride comfort with the equivalent suspension stroke compared to the traditional methods. [ABSTRACT FROM AUTHOR]

Precise timing plays a key role in the time‐sensitive industrial Internet of Things (IIoT). However, precise time synchronization requires more frequent packet exchange, which consumes more communication bandwidth and energy. This is a particular challenge in battery‐powered wireless nodes, and low communication costs have become an important factor in clock synchronization. To address the challenge of achieving low communication cost clock synchronization in distributed wireless sensor networks, this paper proposes an improved event‐triggered control and synchronization scheme with a novel asynchronous broadcast packet exchange protocol. Unlike the traditional event‐triggered control scheme which is based on synchronous polling packet exchange, this proposed asynchronous broadcast packet exchange is more communication efficient and requires fewer number of packet exchanges. And it is worth noting that the proposed algorithm in this paper is a distributed algorithm and does not require real‐time acquisition of information from neighbouring nodes. Finally, a numerical example is given to illustrate the effectiveness of the proposed event‐triggered control strategy. The efficiency and precision of the proposed clock synchronization method is evaluated by intensive simulations, which show that the number of packet exchange is reduced by 60% for a moderate IIoT network and is particularly useful for large scale network. [ABSTRACT FROM AUTHOR]

This paper presents a novel input channel gain adaptive active disturbance rejection control (ICGA‐ADRC) framework for the nonlinear control system with large load variation. This paper first introduces the design of ICGA‐ADRC and proves its stability through the rigorous Lyapunov approach. Subsequently, the proposed controller is simulated by subjecting it to a nonlinear mass‐spring‐damping system characterized by significant load variations. Furthermore, the position‐tracking performance of the controller is tested experimentally by using a motor‐driven pendulum system with various loads. Finally, the results of both simulations and experiments show that the ICGA‐ADRC is capable of compensating for system model uncertainty and external perturbation while accurately estimating the system input channel gain in real‐time. The innovation of this paper is that the robustness of active disturbance rejection control (ADRC) to the system load variation is significantly strengthened by integrating robust adaptive finite‐time parameter estimation method into the conventional ADRC control architecture. [ABSTRACT FROM AUTHOR]

This paper presents a study of the cooperative optimal swarm control problem for two‐order multi‐agent systems with partially unknown nonlinear functions. Unlike traditional approaches that consider a single error, this paper proposes to use multi‐order errors in the performance index function to achieve optimal control performance. Additionally, different proportional coefficients are assigned to illustrate the varying influences of each sequence error, and a two‐order cooperative (TOC)performance index function is designed. To address the influence of unknown nonlinear functions, a swarm control system based on sliding mode control with an actor‐critic network is constructed, which increases the applicability of the proposed method to a variety of dynamic models. Furthermore, to alleviate the computational pressure caused by the multi‐order errors in the TOC performance index function, a new reinforcement learning (RL)‐based sliding mode swarm controller is designed. The stability of the proposed controller is demonstrated using the Lyapunov function. Finally, the control model and control rate are applied to a quadrotor unmanned aerial vehicle system, and simulation results demonstrate that the multi‐agent systems can effectively achieve swarm control. Impact Statement: This paper proposes a reinforcement learning‐based sliding mode control strategy for the cooperative optimal swarm control problem, where the nonlinear functions of two‐order multi‐agent systems are only partially known. In addition, we also propose a cooperative performance index function, which takes into account multi‐order errors for optimizing the performance. This contribution is significant for research in sliding mode control strategies and error co‐optimization. [ABSTRACT FROM AUTHOR]

Due to variable and complex work environments, nonlinearities, uncertainty and disturbances are inevitable in multi‐agent systems. Approximation‐free control can address these issues without involving approximators, such as fuzzy logic systems and neural networks. However, some issues like the singularity problem caused by the signals exceeding the preset boundary in changing work conditions still remain. This paper proposes an adaptive and reliable approximation‐free control, which comprises a novel singularity compensator and a modified transforming function. The proposed control scheme performs better in terms of convergence rate and overshoot, avoids issues relating to singularity, and has added flexibility in terms of parameter choice. The proposed control law adapts to changes in operating conditions and nonlinearities—the efficacy of which is demonstrated using simulations. [ABSTRACT FROM AUTHOR]

This paper presents an edge‐based event‐triggered delay distributed algorithm for solving the economic dispatch problem (EDP) in smart grids. The objective of the EDP is to minimize the total generation cost by allocating power to individual generators, each with its local generation constraint. To save the overhead of communication resources between agents, an edge‐based event‐triggered mechanism is suggested. By setting distinct triggering thresholds for each communication edge, the agent may efficiently regulate the communication frequency among all neighbors. However, in practice, owing to the instability of the network, the agent may receive information regarding its neighbors, leading to communication lags for every communication link. The virtual agent technique and double‐stochastic matrix augmentation technique provide an equivalent delay‐free EDP. It is demonstrated that the proposed algorithm can asymptotically converge to the global optimal solution as long as the communication delay is arbitrary, time‐varying, and random, but bounded. Objective and clear evidence is provided through a case study in smart grids to verify the algorithm's feasibility. [ABSTRACT FROM AUTHOR]

This paper introduces an adaptive control scheme for quadrotor suspended load systems, to track desired trajectory with variable payload and wind disturbances. The dynamic model of the quadrotor suspended load system is developed, taking into account the impact of the wind field described by the Dryden model. To attenuate the effects of payload variation and wind disturbances on the system, an adaptive control method based on disturbance observers is devised. Additionally, the uniform boundedness of all error signals is demonstrated. The effectiveness of the designed control method is verified through simulations, which serves to strengthen its applicability in practical applications. [ABSTRACT FROM AUTHOR]

For enhancing the load torque synchronization performance of dual‐driven systems, the inherent coupling effect between the parallel axes is analyzed first and could be described as two distinct components of the synchronous error. Thus, the feedforward‐feedback composite synchronous control scheme is proposed in this paper to eliminate these desynchronization factors. Secondly, the selection of synchronization objectives such as speeds, positions or currents of parallel axes is analyzed, which may not accurately reflect the actual load desynchronization due to mismatch dynamics. To overcome this drawback, the synchronous feedback controller is modified by incorporating a load torque observer, which can provide good adaptation to modelling errors, disturbances and eliminate the load desynchronization effectively. Simulation and experimental results demonstrate significant improvement in load torque synchronization performance achieved by the proposed control scheme. [ABSTRACT FROM AUTHOR]

Formation control is a fundamental task in the realm of autonomous multiagent systems. To drive a group of agents to maneuver continuously with the desired formation, this paper studies the finite‐time affine formation control problem with disturbances, input constraints and safety guarantee. A non‐singular terminal sliding mode control (NTSMC) is implemented to achieve finite‐time convergence of all followers to their desired positions. Additionally, an auxiliary system is deployed to address input constraints resulting from the physical properties of the affine formation system. To mitigate the impact of lumped disturbances, a finite‐time disturbance observer (FTDO) is employed to estimate the disturbances and compensate for their effects. Based on FTDO, the auxiliary system and the above NTSMC, a finite‐time robust controller is developed as the nominal controller. By modifying the nominal controllers to comply with safety constraints, control barrier functions are employed to ensure the safety of the formation system in obstacle‐filled environment. Finally, the effectiveness and feasibility of this method are validated through simulations and real‐world experiments. [ABSTRACT FROM AUTHOR]

In industrial process control, the proportional–integral–derivative (PID) control scheme is well‐recognized and widely utilized. However, due to the distinctive characteristics of real systems, their control design primarily aims at achieving optimal production performance, constrained by uncertainty and variations. This paper initially discusses a database‐driven PID (DD‐PID) control scheme that was previously proposed. This scheme combines the DD‐PID with the cerebellar model articulation control to minimise computational and memory requirements for industrial application. Subsequently, a hydraulic system is introduced, detailing its characteristics and control necessities. Furthermore, both the DD‐PID and the proposed cerebellar model articulation control memory‐based DD‐PID control schemes are implemented and evaluated through experimental examples on a hydraulic system. Lastly, as a practical validation of the theoretical approach, a quantitative assessment compares the two methods, discussing the practicality and efficacy of the proposed scheme in reducing computation and memory consumption. [ABSTRACT FROM AUTHOR]

This study addresses the state estimation problem of discrete‐time non‐linear stochastic systems with non‐Gaussian noises, particularly impulsive noises. Instead of minimizing the mean square error of the state estimate, which tends to excessively focus on outliers caused by non‐Gaussian noises, the ℓ1${\ell }_1$ norm‐based non‐linear recursive filter (L1KF) is put forward in this paper. Here, minimizing the ℓ1${\ell }_1$ norm of model errors is actually to pursue the minimum sum of absolute values of all errors, which is equitable to all model errors rather than paying much attention on outliers. To further improve estimation accuracy, a recursive nonlinear smoother (L1KS) is proposed, based on minimizing the ℓ1${\ell }_1$ norm of model errors. The proposed ℓ1${\ell }_1$ norm‐based filter and smoother are implemented using unscented transformation for statistical linear regression applied to nonlinear models. Additionally, the computational complexity of the proposed method is analysed. Simulation results of tracking a radar target with impulsive noises demonstrate the effectiveness and robustness of the proposed estimator. [ABSTRACT FROM AUTHOR]

In this paper, an improved zeroing neural network (ZNN) model is proposed to obtain the positive definite solutions of the continuous coupled Lyapunov matrix equations (CLMEs) associated with continuous‐time Markovian jump (CMJ) systems. To achieve this, a general ZNN model is established by constructing a matrix‐valued error function. Then, to accelerate the convergence rate of the proposed ZNN model, the latest estimation is introduced to obtain an improved ZNN model. Some convergence conditions have been derived for the presented improved ZNN model through Lyapunov theory. Comparisons among the improved ZNN model and the existing results are conducted to illustrate the advantages of the proposed improved ZNN model in numerical examples. [ABSTRACT FROM AUTHOR]

The paper is devoted to the adaptive tracking control based on the mismatched disturbance observer for motor‐driven robotic manipulators. A novel mismatched disturbance observer is introduced, which does not make bounded derivative assumptions on mismatched disturbances in the robotic manipulator system. Additionally, a new adaptive tracking controller for a motor‐driven robotic manipulator based on the mismatched disturbance observer is designed, which guarantees that all closed‐loop signals are globally uniformly bounded and the tracking error is asymptotic stable. Finally, the simulation comparisons are carried out between the proposed and existing control strategies to demonstrate the superiority of the developed controller. [ABSTRACT FROM AUTHOR]

The concurrent existence of model uncertainties, external disturbances, and actuator faults in a nonlinear system such as a robotic manipulator can significantly affect the trajectory tracking performance of these systems. Therefore this study is devoted to proposing a control approach based on fixed‐time control theory to improve the trajectory tracking performance of the robotic manipulator in the presence of lumped disturbance, including uncertainties, external disturbances, and actuator faults. The control approach in this paper is designed based on the integration of a fixed‐time adaptive sliding mode observer and a fixed‐time non‐singular fast terminal sliding mode control design strategy. Firstly, a new fixed‐time adaptive sliding mode observer is designed based on fixed‐time theory and adaptive control theory to estimate the lumped disturbance present in the system. Then, using the information from the disturbance observer, the fixed‐time non‐singular fast terminal sliding mode control is devised based on a non‐singular fixed‐time sliding surface and a fixed‐time reaching approach. Furthermore, in the sense of the Lyapunov theorem, through rigorous analysis, it is demonstrated that the tracking errors of the closed‐loop system converge to a small neighbourhood within a fixed time, regardless of the information about the initial conditions of the states of the system. Finally, extensive comparative simulations are performed using the PUMA560 robot to manifest the feasibility and validity of the proposed control strategy in terms of trajectory tracking accuracy and fast convergence in the presence of uncertainties, disturbances, and actuator faults. [ABSTRACT FROM AUTHOR]

This paper presents an analytical method to solve the optimal control problem for affine nonlinear systems with unknown drift dynamics. A new non‐quadratic cost function over an infinite horizon is presented that considers input constraints and includes the cost of the feed‐forward component of the control law. The mean value theorem for vector‐valued functions has been used to derive an integral form of this theorem. Based on this theorem, a rigorous proof is provided demonstrating that the cost function can be converted into another form. In the presence of input constraints, this converted form enables extracting the optimal control solution without solving the HJB equation. Additionally, unknown nonlinearity effects in drift dynamics are compensated in the control input. This is accomplished by estimating the unknown drift dynamics via an adaptive neural network (NN) approach. It is proven that the states and weights of NN are uniformly ultimately bounded based on a Lyapunov technique. The necessary and sufficient conditions are provided that ensure the optimality of the infinite horizon optimal control problem with a discount factor. As a result, it is demonstrated that the proposed approach satisfies the optimality criteria. To evaluate the effectiveness of the proposed approach, simulation examples are provided. [ABSTRACT FROM AUTHOR]

This paper proposes a nonlinear control law with a dynamic controller based on high gain observer (HGO) for a co‐axial double rotor magnetic gear (CADRMG) based on Halbach array used in wind turbines. The generalized canonical form (GCF) is used to normalize the nonlinear augmented system to achieve the dynamic control signal with a chain of integrator of system output. In addition, a tracking problem is defined to track high speed rotor (HSR) with respect to GCF. On the other hand, the HGO is used to estimate the error tracking at the expense of nonlinear terms. Furthermore, the nonlinear system observability of the augmented system is evaluated. A dynamic control law is used to solve the tracking problem based on HGO. This controller can eliminate the effect of load torque as a constant and unknown disturbance in the closed‐loop system. Moreover, the closed‐loop stability of the system under dynamic signal control is guaranteed. The system states estimation is calculated by recursive equations from tracking error estimations. Finally, numerical simulations are given to illustrate the theoretical results of proposed system. [ABSTRACT FROM AUTHOR]

This paper is dedicated to proposing improved input‐to‐state stability (ISS) criteria for a class of continuous‐time time‐varying switched singular systems (CTSSS) under slow/fast/slow‐fast switching signals. Specifically, for a CTSSS with time‐varying singular matrices, the authors start with an improved sufficient condition for verifying its ISS under slow switching signals based on the average dwell time method and a relaxed multiple Lyapunov function. Then, considering several or all subsystems may destroy the overall ISS, relaxed sufficient conditions are presented to ensure the ISS of the CTSSS under fast switching signals and slow‐fast switching signals, respectively. Note that the improvement of the proposed ISS criteria is embodied in the derivative of the required multiple Lyapunov functions along with the state trajectories of CTSSS can be positive or negative. Finally, three numerical examples are provided to illustrate the feasibility of the obtained results. [ABSTRACT FROM AUTHOR]

This paper studies the H∞ control problem for polynomial time‐varying systems. The H∞ control problem has been much less investigated for time‐varying systems in comparison to the time‐invariant systems. Approximate dynamic programming (ADP) is an optimal method to solve the control problems. Therefore, it is valuable to solve the polynomial time‐varying H∞ control problem with the ADP approach. Considering the time as an independent variable for sum‐of‐squares (SOS) optimization problems, an SOS‐based ADP method is proposed to solve this problem. A policy iteration algorithm is presented, where in its policy evaluation step it is sufficient to solve an optimization problem. Some constraints are added to this optimization problem to guarantee the closed‐loop exponential stability. The convergence and stability properties of the proposed algorithm are stated and proven. Moreover, in order to design an H∞ controller with a smaller disturbance attenuation coefficient, a two‐loop algorithm is suggested. Finally, the effectiveness of the proposed method is demonstrated by simulation examples. [ABSTRACT FROM AUTHOR]

This paper addresses the trajectory tracking problem for a class of uncertain manipulator systems under the effect of external disturbances. The main challenges lie in the input constraints and the lack of measurements of joint velocities. An extend‐state‐observer is utilized to estimate the velocity signals; then, a neural‐network‐based adaptive controller is proposed to solve the problem, where a term based on the nominal model is included to enhance the tracking ability, and the effect of uncertainties and disturbances are compensated by a neural‐network term. Compared with the existing methods, the main distinctive features of the presented approach are: (i) The control law is guaranteed to be bounded by design, instead of directly bounded by a saturation function. (ii) The trade‐off between the performance and robustness of the presented controller can be easily tuned by a parameter that depends on the size of model uncertainties and external disturbances. By virtue of the Lyapunov theorem, the convergence properties of the proposed controller are rigorously proved. The performance of the controller is validated via both simulations and experiments conducted on a two‐degree‐of‐freedom robot manipulator. [ABSTRACT FROM AUTHOR]

Regarding the low accuracy and instability of common online methods for estimating dynamic models in the time domain, in the presence of uncertainty in system dynamics, sensor noise and environmental disturbances, this area is still open for further research. In this paper, a new estimation method is proposed based on a new online robust meta‐heuristic adaptive LSQR (ORALSQR) for simultaneous estimation of a multi input/output linear dynamic model and system state variables. This new adaptive LSQR algorithm is used to solve the output matrix equations of the least squares error problem. The presented algorithm, based on its iterative nature, searches the answer subspace by using a new meta‐heuristic logic. In addition, the algorithm solving steps and the search domain size in each iteration are intelligently determined by the method. In an identification maneuver, this method estimates the state variables using an estimated model in the Kalman filter, then estimates the model online for the next iteration using the state variables. In addition the stability proof of this method is presented. Numerical results show more accuracy and robustness of this method compared to the other methods mentioned in this paper which contain LS and RLS based estimation methods. [ABSTRACT FROM AUTHOR]

In this paper, the prescribed tracking performance control problem is addressed for uncertain nonlinear systems with unknown periodically time‐varying parameters and arbitrary switching signal. By utilizing radial basis function neural network and fourier series expansion, an approximator is developed to overcome the difficulty of identifying unknown periodically time‐varying and nonlinearly parameterized functions. To achieve the ideal tracking control performance and eliminate the influence of filtering error, a novel command filter‐based adaptive neural network prescribed tracking performance controller is designed by introducing a filtering compensation mechanism. Differently from the standard Backstepping technique, the proposed control scheme eliminates the "explosion of complexity" problem and relaxes the constraint condition on the reference signal. And then, it is warranted that the closed‐loop system is semi‐globally ultimately uniformly bounded and the tracking error is always limited to the specified region bounded by the performance functions. Three simulation examples are used to demonstrate the feasibility of the developed technique in this paper. [ABSTRACT FROM AUTHOR]

A tropical cyclone (TC) is extreme weather severely threatening coastal wind turbines. However, the non‐extreme wind speed period (nEWSP) before and after it can also bring considerable economic benefits to wind farms. Aiming at the working conditions of nEWSP‐TC, this paper analyzes the characteristics of the wind field based on historical actual TC data and constructs a pseudo‐Monte Carlo experiment, uses the experimental results to construct a knowledge base and an inference engine, and forms an expert system to guide the yaw control of wind turbines in nEWSP‐TC. The simulation results show that the yaw error has different effects on the fatigue load of the wind turbine under different working conditions of nEWSP‐TC, and the proposed improved yaw strategy can reduce the fatigue load of the wind turbine under the premise of limited power loss and improve safe operation capability of wind turbines under nEWSP‐TC conditions. [ABSTRACT FROM AUTHOR]

In order to improve the efficiency of autonomous robot sorting steel ingots, this paper proposes a two‐dimensional weighted equivalent clustering‐based progressive probabilistic hough transform (2D‐WEC‐PPHT) algorithm for the problem of identifying and locating strip ingots in automatic picking strip ingot palletizing. First, the steel ingot image is preprocessed and the PPHT linear detection method is used to extract the edge linear information of the steel ingot. Second, the angle and position information are normalized and weighted, and a two‐dimensional clustering distance calculation method is proposed for two‐dimensional clustering of the extracted line information. Besides, the clustering line clusters with close angles were processed into equivalent lines by mean fitting. Then, the average threshold method was used to segment the ingot between each two fitting lines, and the minimum rectangle was used to box the segmentation part. The centroid of the box‐selected rectangle is the positioning center of the ingot, and the long side angle of the box‐selected rectangle is the deviation angle information of the ingot. Finally, the experimental results show that the number of redundant lines detected by the 2D‐WEC‐PPHT is significantly less than that of traditional methods such as HT and PPHT. The positioning speed of ingot is faster than that of HT and PPHT, and the processing time is reduced from 20 s to 10 s. In the case of large proportion of old ingots with weak reflection, the recognition accuracy reached 93.5%, and the angular and position positioning accuracy were 2.270° and 11.675 mm, respectively. The recognition accuracy of new ingots with strong reflection reached 99.574%, which met the requirements of picking positioning accuracy. In order to improve the efficiency of autonomous robot sorting steel ingots, this paper proposes a two‐dimensional weighted equivalent clustering‐based progressive probabilistic hough transform (2D‐WEC‐PPHT) algorithm for the problem of identifying and locating strip ingots in automatic picking strip ingot palletizing. [ABSTRACT FROM AUTHOR]

The behaviour analysis of farmers is very important to gradually improve the sustainable production capacity of the land and promote the economics reasonable increasement. How to effectively extract video features and identify human behaviour is a current research hotspot. In this paper, the authors propose a convolutional neural network model based on the deformable convolution including a residual module and an attention module. The model fuses and encodes video spatial features on the time axis and extracts semantic information. The authors combine the attention mechanism to extract local and global features in the video, which are used to calculate spatial features and micro‐motion features, respectively. Temporal attention mechanism fuses each micro‐motion feature of video to extract higher‐level semantic features of motion. Next, the authors describe their proposed model based on deep learning. First, the authors introduce a video frame sampling method based on the TRN algorithm. Second, they design a feature extraction and fusion model based on the ResNet model and the attention mechanism that extract local and global features in videos. Finally, the authors classify and identify the extracted video features through the classifier. The authors' approach shows comparable performance on publicly available datasets. [ABSTRACT FROM AUTHOR]

In accordance with the requirements of unmanned robot driving power supply for power supply reliability, strong power output, and portability, this paper introduces a design scheme for unmanned robot driving power supply on the basis of a flyback converter, establishes the mathematical model of driving power supply (flyback converter), designs the transformer part of a flyback converter, and recommends a straightforward and efficient clamping circuit to enhance it. The controller of the flyback converter is designed in detail. Ultimately, the feasibility and effectiveness of the design method in the driving power supply of unmanned robots are demonstrated by simulation and experiments. [ABSTRACT FROM AUTHOR]

This paper proposes a new algorithm based on sensitivity analysis and the Wolfe method to solve a sequence of parametric quadratic programming (QP) problems such as those that arise in quadratic model predictive control (QMPC). The Wolfe method, based on Karush–Kuhn–Tucker conditions, has been used to convert parametric QP problems to parametric linear programming (LP) problems, and then the sensitivity analysis is applied to solve the sequence of the parametric LP problems. This strategy obtains sensitivity analysis‐based QMPC (SA‐QMPC) algorithm. It is proved that the computational complexity of SA‐QMPC is O(Nn2)$O(Nn^2)$ for a region of the initial conditions and O(N2n2)$O(N^2n^2)$ for sufficiently small sampling time and all initial conditions, where N$N$ and n$n$ are the horizon time and dimension of the state vector, respectively. Numerical results indicate the potential and properties of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Aiming to improve the estimation and prediction accuracy of a target's position, this paper proposes a state estimation method for photoelectric tracking systems, based on the evaluation of the tracked target's motion intention. Traditional photoelectric tracking systems utilize external physical quantities such as the position, velocity, and acceleration of the target as the estimated states. While this method can output good results for pre‐modelled target positions, it struggles to maintain the accuracy when facing manoeuvering targets or complex motion patterns targets. Here, the relevant parameters of the tracked target's motion intention are directly estimated innovatively, like estimating the circling point position rather than the circular flying target's position and velocity. This approach enables recognizing the target's motion intention and leads to precise estimation, which specifically consists of an interacting multiple model approach, multiple unscented Kalman estimators, and a robust estimator. The effectiveness and stability of this estimator are validated through software simulations and experiments on a dual‐reflection mirror platform. [ABSTRACT FROM AUTHOR]

This paper explores two non‐linear control techniques for designing an effective control system for an omnidirectional autonomous mobile robot with four Mecanum wheels. Due to the unique wheel structure and four separate wheels, the robot has non‐linear dynamics, multiple inputs and outputs. The first technique uses the state‐dependent Riccati equation (SDRE) to address optimal non‐linear control while considering energy and time constraints. The second technique, using an intermediate variable θ$\theta $, has expanded the Hamilton‐Jacobi‐Belman equation in terms of the power series. Consequently, these equations are reduced to a set of recursive Lyapunov algebraic equations, leading to a closed‐form solution for solving the non‐linear optimal control problem. Finally, the maneuverability and path‐tracking capability of the robot are examined by highlighting the non‐linear term through numerical simulation. [ABSTRACT FROM AUTHOR]

This paper studies the finite time stabilization control (FTSC) problem of nonlinear systems with unknown functions and full‐state constraints (FSCs). A lemma dealing with unknown functions is put forward so that the assumptions and the "explosion of terms" (EOT) of backstepping are avoided. Compared with approximation algorithms, this algorithm can make the system states converge to the origin in a finite time. On the other hand, a new logarithmic constraint function is utilized to solve the drawback of barrier Lyapunov functions (BLFs). Then, combined with finite time control (FTC), an FTSC algorithm with FSCs is proposed. Finally, simulations of Chua's circuit system are given to verify the effectiveness and superiority of this algorithm. Compared with the approximation algorithm, this algorithm can theoretically make the states of Chua's circuit system to the origin in a finite time. [ABSTRACT FROM AUTHOR]

This paper considers the secure distributed control consensus problem of linear multi‐agent systems (MASs) under switching topologies, subject to intermittent sequential scaling attacks, which was compelled to scaling factor, attack frequency, duration and cooperative‐competitive networks. First, the scenario of a fixed topology is considered, and a novel control protocol combined with a logarithmic quantizer and relative state measurements of neighbouring agents is discussed. The sighed graph is utilized to characterize the communication topology determined by the information flow directions and captured by the graph Laplacian matrix. After that, sufficient conditions for effectiveness of the developed control methods in guiding the MASs to secure bipartite leader‐following consensus are constructed. Second, the scenario of switching topologies is considered, and it is derived that the secure bipartite consensus will be achieved if the designed state feedback control protocol with the scaling factor, the attack duration, attack frequency and switching signal are selected properly. At last, to prove the effectiveness of the designed controllers, a simulation example depended on the real‐word actual military is introduced. [ABSTRACT FROM AUTHOR]

This paper studies the input‐to‐state stability of an uncertain switched linear system with external disturbances, whose feedback loop is closed over a digital communication network. In the network, only a finite bit rate can be provided to transmit the feedback signal and unknown network delay always exists. By using reachable set approximation and propagation methods, it can well handle with the effects of model uncertainty, external disturbances and network delay on the stability of the system. To save network resources, event‐triggered sampling is taken here. Under the event‐triggered sampling strategies, a new encoder is proposed, which consumes less feedback bits than the conventional time‐triggered encoders. It is proven that even in the existence of model uncertainty, external disturbances and network delay, the proposed event‐triggered sampling strategies require a lower feedback bit rate to stabilize the switched system than conventional periodic sampling methods. To save network resources, event‐triggered sampling is taken here. Under the event‐triggered sampling strategies, a new encoder is proposed, which consumes less feedback bits than the conventional time‐triggered encoders. It is proven that even in the existence of model uncertainty, external disturbances and network delay, the proposed event‐triggered sampling strategies require a lower feedback bit rate to stabilize the switched system than conventional periodic sampling methods. [ABSTRACT FROM AUTHOR]

In the field of optoelectronic tracking, precisely modeling the motion equations of the tracked target is often challenging, and in some cases, they may even be entirely unknown. This necessitates the use of a robust state estimator for accurate state estimation. Additionally, atmospheric turbulence, variations in illumination, and intricate observation backgrounds may introduce a significant increase in observation noise for the tracked target. To address these challenges, one approach is to introduce adaptive factors, such as the Mahalanobis method, into the robust state estimator to enhance estimation accuracy. However, further exploration has revealed that adaptive factors designed using different methods offer unique advantages in scenarios with varying levels of noise amplification. In this paper, different adaptive factors are further combined using an interacting multiple model approach, allowing the designed state estimator to exhibit stronger adaptability to noise amplification. The stability and effectiveness of this algorithm are validated through program simulations, double reflection mirror experiment, and drone trace prediction, demonstrating its applicability and reliability in diverse scenarios. [ABSTRACT FROM AUTHOR]

The stabilization problem for uncertain discrete‐time singular Markovian jump systems (DSMJSs) with time‐varying delays is comprehensively covered in this paper. An updated Lyapunov–Krasovskii functional is presented via a discrete state decomposition method. With the help of this constructed Lyapunov–Krasovskii functional, some delay‐ and mode‐dependent sufficient conditions for the open‐loop DSMJSs are derived. Based on these circumstances, a memory mode‐dependent state feedback control is used to create a closed‐loop DSMJS with parameter uncertainties that is regular and causal. And then, the stochastically admissible conditions are attained. Through the exact calculation of each decomposition component for the designed memory state feedback controller, the intended memory state feedback controller settings are determined. It should be mentioned that the algorithm suggested in this article expands the controller design's feasibility and flexibility. The numerical results show how the approach is superior to previous ones, and the given results are less conservative. [ABSTRACT FROM AUTHOR]

In the realm of evolutionary game theory, the majority of scenarios involve players with incomplete knowledge, specially regarding their opponents' actions and payoffs compounded by the ever‐shifting landscape of players' interactions. These dynamics present formidable challenges in both the analysis and optimization of game evolution. To address this, a novel model named the networked evolutionary game (NEG) is proposed based on incomplete information with switched topologies. This model captures situations where players possess limited insight into their opponents' benefits, yet make decisions based on their own payoffs while adapting to different networks and new players. To bridge the gap between incomplete and complete information games, R. Selten's transformation method is leveraged, a renowned approach that converts an incomplete information game into an interim agent game, thereby establishing the equivalence of pure Nash equilibria (NE) in both scenarios. Employing the semi‐tensor product (STP) of matrices, a powerful tool in logistic system, the evolution of the model is articulated through algebraic relationships. This enables to unravel the patterns of game evolution and identify the corresponding pure Nash equilibria. By introducing control players, strategically positioned within the game, optimized control is facilitated over the evolutionary trajectory, ultimately leading to convergence towards an optimal outcome. Finally, these concepts are illustrated with a practical example within the paper. [ABSTRACT FROM AUTHOR]

This paper considers the problem of communication protocols between leaders and its followers for motion planning in an initially partially known environment. In this setting, the leader observes the environment information to satisfy its own local objective and and the follower completes its own local objective by estimating the states of the leader and communicating with the leader to update its knowledge about the environment when it is necessary, where the local objectives can be expressed in temporal logic. A verifier construction is built first to contain all possible communication protocols between the leaders and the followers. Then, a two‐step synthesis procedure is proposed to capture all feasible communication protocol that satisfy the local objectives for the leader and follower, respectively. In the first step, a sub‐verifier is synthesized to satisfy the objective of the follower. In the second step, based on the obtained sub‐verifier, an iterative algorithm is proposed to extract communication protocols such that the objectives of the leader and follower are satisfied, respectively. A running example is provided to illustrate the proposed procedures. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of achieving finite‐time fault‐tolerant consensus control for a class of non‐linear fractional‐order multi‐agent systems (NFO‐MAS) using finite‐time fault detection and estimation, as well as a finite‐time state observer. To achieve this, a specific lemma is utilized to rewrite the high‐order model of NFO‐MAS as a lower‐order NFO unique system. By employing new identification rules and introducing a fault estimation method, both the state variables and faults of the agents are estimated within a finite time. Subsequently, a finite‐time sliding mode control law is designed based on the estimated fault and the state variables obtained from the proposed finite‐time observer to achieve consensus within a finite time for the fractional‐order non‐linear MAS. The stability of the fault estimation, state observer, and consensus controller is proven using the finite‐time Lyapunov theory. The effectiveness of the proposed approach is demonstrated through numerical simulations. [ABSTRACT FROM AUTHOR]

In this paper, the problem of state estimation for systems over wireless networks using user datagram protocol is focused on. It is known that for such a system, the probability density function of the system state follows a Gaussian mixture model (GMM), and the number of components in this model grows exponentially over time, which makes the computation of optimal estimates infeasible. To compute optimal estimates, based on Kullback‐Leibler divergence, a strategy with variable step‐sizes to truncate and fuse the GMM is proposed. Based on the obtained GMM, a variable step‐size estimator is designed to compute optimal estimates during an estimation cycle. The advantages of the proposed estimator are twofold: (1) its estimation performance is superior to that of existing one‐step fast estimators; (2) its estimation efficiency is much higher than that of the optimal estimator. Finally, trajectory tracking has been proposed for a real‐world hydrogen‐powered unmanned aerial vehicle to show the effectiveness of our methods. [ABSTRACT FROM AUTHOR]

This paper proposes explicit solutions for the algebraic Riccati matrix equation. For single‐input systems in controllable canonical form, the explicit Hermitian solutions of the non‐homogeneous Riccati equation are obtained using the entries of the system matrix, the closed‐loop system matrix, and the weighting matrix. The unknown entries of the closed‐loop system matrix are solved by scalar quadratic equations. For a homogeneous Riccati equation with a zero weighting matrix, the explicit solutions are proposed analytically in terms of the system eigenvalues. The advantages of the explicit solutions are threefold: first, if the system is controllable, the solution is directly given and the invariant subspaces of the Hamiltonian matrix are not required; second, if the system is near singularity, the explicit solution has higher numerical precision compared with the solution computed by numerical algorithms; third, for a real system in the controllable canonical form, the non‐negativity can be analysed for the explicit almost stabilizing solution. [ABSTRACT FROM AUTHOR]

This paper is concerned with the stability analysis of discrete‐time systems with a time‐varying delay. The conservatism and computation burden are two important factors to evaluate a stability condition. By taking the relationship of two reciprocally convex parts into consideration, a new combined matrix‐separation‐based inequality is proposed that involves only a few free matrices. Moreover, an improved matrix‐injection‐based transformation lemma with the parameter varying within a closed interval is proposed by introducing only one free matrix. By constructing an appropriate Lyapunov–Krasovskii functional and applying the improved methods, a relaxed stability condition is consequently obtained with a small number of decision variables. Two numerical examples are given to show the merits of the proposed methods. [ABSTRACT FROM AUTHOR]

This paper studies the control problem of free‐floating space manipulators, and a control scheme is proposed to solve reactionless control of the end‐effector pose tracking with parameter uncertainty and input disturbance. First, based on dual modeling to treat the end‐effector as a virtual base spacecraft, the dynamics with uncertainties are established which map the joints' torque to the end‐effector pose and base spacecraft attitude, while the inverse kinematics and the derivative of the generalized Jacobi matrix can be avoided in controller design. Then, the reference acceleration stabilization schemes satisfying prescribed performance constraints are carefully designed for tracking errors, and based on these schemes the steady‐state and transient performance of the tracking control can be guaranteed. Further, the radial basis function neural network is adopted to estimate modeling errors caused by parameter uncertainty and input disturbance. In addition, a concurrent learning method is introduced in the network weights matrix update law, which allows the estimation errors to converge a neighborhood of zeros without the need for satisfying the persistent excitation condition. The simulation results verify the effectiveness of the proposed control scheme. [ABSTRACT FROM AUTHOR]

This paper introduces a novel data‐driven approach to develop a fault‐tolerant model predictive controller (MPC) for non‐linear systems. By adopting a Koopman operator‐theoretic perspective, the proposed method leverages historical data from the system to construct a data‐driven model that captures the non‐linear behaviour and fault characteristics. The fault influence is addressed through an online estimation of a time‐varying Koopman predictor, which allows for adjusting the MPC control law to counteract the fault effects. This estimation is performed in a higher dimensional Koopman feature space, where the dynamics behave linearly. As a result, the non‐linear fault‐tolerant MPC optimization problem can be replaced with a more practical and feasible linear time‐varying one using the approximated Koopman predictor. Moreover, by incorporating the online update procedure, the time‐varying Koopman predictor can represent the dynamics of the faulty system. Hence, the controller can adapt and compensate for the faults in real‐time, integrating the fault diagnosis module in the MPC framework and eliminating the need for a separate fault detection unit. Finally, the efficacy of the proposed approach is demonstrated through case study results, which highlight the ability of the controller to mitigate faults and maintain desired system behaviour. [ABSTRACT FROM AUTHOR]

In this paper, a novel nonlinear unknown input observer is proposed in order to fault estimation for nonlinear uncertain systems with time delays. By the estimation of the faults, the features are detected such as shape, size occurrence time etc. The time delay is considered a constant and known parameter in the states. The disturbances are investigated in the states and outputs and also, and sensor and actuator faults are considered. The stability of the closed‐loop system is guaranteed by Lyapunov–Krasovskii theory and some feasible Linear matrix inequalities (LMI). The proposed method is simulated on a continuous‐stirred tank reactor (CSTR) with uncertainties and time delay. Simulation results show the appropriate efficiency of the proposed method. [ABSTRACT FROM AUTHOR]