Search

Various planar folded dipole antennas with feed lines are introduced and analyzed. With the added feed line, the planar folded dipole antenna has two resonance modes. Moreover, adjusting the spacing and width of the feed line improves the broadband characteristics of the antenna. The attached feed line has not only an impedance transforming characteristic but also a bandwidth transforming characteristic. The bandwidth transforming characteristic means that the feed line can broaden the bandwidth of folded dipole antenna. A way to reduce the antenna area is also studied, and the characteristics of the resulting compact antenna are analyzed.

In this study, we propose a method to reduce the mutual coupling between two J-shaped folded monopole antennas (JFMAs), which cover the IEEE 802.11 b/g (2400-2484MHz) band. First, the change in mutual coupling with the spacing between the two antenna elements is investigated by considering two feeding models, and the effects of changes in the coupling on the antenna efficiency are studied. Subsequently, we try the method to reduce mutual coupling, the method involves the use of a bridge line that links the two antennas. The mutual coupling can be significantly reduced and the total antenna efficiency can be improved by linking two shorting strips with the bridge line. In a past study, we had found that in the case of L-shaped folded monopole antennas (LFMAs), the mutual coupling and antenna efficiency vary with the linking location on the bridge line. Moreover, we compare the characteristics of the LFMA and JFMA and show that the JFMA is effective when miniaturized.

A compact built-in handset antenna for multiple-input multiple-output (MIMO) system at 2GHz, comprising two elements array of newly proposed L-shaped folded monopole antenna (LFMA), is evaluated under the multipath radio wave propagation environments. By analyzing the fundamental characteristics, mean effective gain (MEG), correlation, and channel capacity, the significant enhancement in the capability, as a handset MIMO antenna under practical use conditions, was confirmed. The performances were also compared to those of an array antenna comprising two planar inversed-F antenna (PIFA) elements in order to verify the effectiveness of the proposed antenna. The results show that the equivalent or improved performances can be realized, by using the proposed LFMA array with a compact size, taking only the volume of 44% of a PIFA array. The LFMA array provides almost the same bandwidth and enhanced isolation compared with a PIFA array, and the sufficiently low correlation and acceptable effective gain are obtained under the multipath radio wave propagation environments. In addition, a greater channel capacity than a PIFA array is achieved especially when the proposed LFMA array is inclined for the display-viewing mode, and moreover, an almost doubled increase in the channel capacity is obtained by using MIMO transmission compared with single-input single-output (SISO). This study also show that the MEG has much effects on the channel capacity, rather than the correlations, for the proposed antenna.

A folded loop antenna for handsets has already been introduced and shown as one of balance-fed antennas for handsets, which is very effective to mitigate the antenna performance degradation due to the body effect. In order to meet the requirements for the latest handsets such as low profile and small size, a folded loop antenna is modified. The antenna, which is possibly built in the handsets, is newly proposed. Low profile and small size is achieved by consisting of the half of low profile folded loop antenna, which has a structure folded loop elements sideways so that the antenna can be placed on the ground plane (GP). In the analysis, the electro-magnetic simulator based on the FDTD (Finite Difference Time Domain) method is used and the design parameters useful in practical operation are found. The electromagnetic simulator based on the Method of Moment (MoM) is used to calculate the current distribution on the antenna element and the GP. An example of low profile and small size antenna which has wideband characteristics are designed based on these parameters, and the antenna characteristics such as VSWR, the current distributions and the radiation patterns are compared with Planar Inverted-F Antenna (PIFA), which is one of conventional built-in antennas for handset. As a result, it has been confirmed that the physical volume of the antenna, which has been introduced here, becomes smaller than that of PIFA. In addition, the radiation efficiency of these antennas is measured and the results are compared with each other.