Search

Unmanned Aerial Vehicles (UAVs) have attacted much attention in the field of wireless communication due to its agility and altitude. UAVs can be used as low-altitude aerial base stations (UAV-BSs) to provide communication services for ground devices (GDs) in various scenarios, such as emergency communication and traffic offloading in hotspots. However, due to the limited communication ranges and high prices of commercial UAV-BSs, covering a target area all the time with sufficient UAVs is quite challenging, especially under dynamic environment. We need to design the trajectory of the UAV-BSs to optimize system performance. Most existing works focus on the energy-efficient coverage and throughput maximization but ignore the fairness of communication service, especially the fairness at user-level. Besides, reinforcement learning is suitable for solving decision problems in dynamic environments. However, most existing works use centralized deep reinforcement learning (DRL) approaches. Due to the scalability and low time complexity, a distributed DRL approach is more suitable for multiple UAV-BSs communication system in dynamic environment. Unlike previous works, we characterize the fairness at user-level based on proportional fairness scheduling and formulate a weighted-throughput maximization problem via designing UAV-BSs’ trajectory. Then we model the dynamic deploymentproblem of UAV-BSs as a Markov game and propose a multi-agent deep reinforcement learning-based distributed UAV-BSs control approach named MAUC. MAUC approach adopts the framework of centralized training with distributed execution. Simulation results show that the MAUC can improve fairness of communication service by sacrificing a small amount of throughput. [ABSTRACT FROM AUTHOR]

The explosive computation demands in the Internet of Things (IoT) have triggered the research interests on unmanned aerial vehicle (UAV) assisted mobile-edge computing (MEC) systems even though there are still many challenges, such as computing delay requirement, multi-UAV cooperation, and resource management. This letter focuses on the computing delay issue in MEC systems assisted by multiple UAVs with the goal of task completion time minimization. In particular, both the partial offloading and binary offloading modes are considered by jointly optimizing time slot size, terminal devices scheduling, computation resource allocation, and UAVs’ trajectories. Particularly, an non-LoS channel model is adopted for UAV-ground communication. To handle the formulated problems, we develop alternating optimization algorithms by invoking the successive convex approximation method, Karush-Kuhn-Tucker conditions and penalized method. Numerical results show that the completion time is significantly decreased by the proposed algorithms. [ABSTRACT FROM AUTHOR]

In this letter, we investigate an unmanned aerial vehicle (UAV) enabled wireless powered communication network (WPCN), in which the UAV first employs the radio frequency (RF) signal to power ground users, and then the users communicate with the UAV by using the harvested energy. The sum rate maximization problem in WPCN suffers doubly near-far effect caused by the double signal propagation loss in both the energy harvesting and communication stage. It is generally believed that this effect can be alleviated by integrating UAV into WPCN, thanks to its flexible deployment. However, due to the lack of analytical solution in state-of-art research, it is still unclear how to quantify the advantage that the mobility of UAV brings to migrating the doubly near-far effect. To address this issue, by showing that the optimal UAV trajectory has a multi-location hovering structure, we first derive the closed-form optimal solution of resource allocation, as a function of the UAV hovering location for downlink wireless power transfer (WPT). We then prove that the UAV in our case only needs to hover at a single location for WPT. More importantly, it is explicitly shown that the doubly near far effect can be alleviated into near-far effect. Simulation results validate our analysis. [ABSTRACT FROM AUTHOR]

This letter considers a solar-powered unmanned aerial vehicle (UAV) system, where the UAV collects data from Internet of Things Devices (IoTDs) on the ground while also charging them using laser charging technology. Both the linear and nonlinear laser charging models are considered. We aim to maximize the residual energy of the UAV while satisfying the requirements of IoTDs by jointly optimizing the three-dimensional (3D) trajectory of UAV and scheduling for IoTDs. The optimization problem is formulated as a mixed integer non-convex problem which is difficult to solve in general. We apply the successive convex approximation and block coordinate descent algorithm to address this problem successfully. Simulation results verify the effectiveness of our algorithm compared with two benchmark methods. [ABSTRACT FROM AUTHOR]

This paper considers secure communications for an underlay cognitive radio network (CRN) in the presence of an external eavesdropper (Eve). The secrecy performance of CRNs is usually limited by the primary receiver's interference power constraint. To overcome this issue, we propose to use an unmanned aerial vehicle (UAV) as a friendly jammer to interfere Eve in decoding the confidential message from the secondary transmitter. Our goal is to jointly optimize the transmit power and UAV's trajectory in the three-dimensional space to maximize the average achievable secrecy rate of the secondary system. The formulated optimization problem is nonconvex due to the non-convexity of the objective and non-convexity of constraints, which is very challenging to solve. To obtain a suboptimal but efficient solution to the design problem, we first transform it into a more tractable form and then develop an iterative algorithm for its solution by leveraging the inner approximation (IA) framework. Combining tools from IA framework and S-procedure, we further extend the proposed algorithm to a more realistic scenario, where the imperfect location information of ground nodes (including Eve, secondary receiver and primary receiver) is considered, resulting in the average worst-case secrecy rate. Extensive numerical results are provided to demonstrate the merits of the proposed algorithms over existing approaches. [ABSTRACT FROM AUTHOR]

Due to the inherent mobility and enhanced communication capability of the unmanned aerial vehicle (UAV), it is foreseen that effective UAV-based sensing schemes can achieve faster deployment and flexible observation as compared to the traditional fixed sensing systems. In many sensing applications, multiple geographically distributed tasks need to be executed while satisfying a stringent requirement on the transmission delay of the sensory data, especially for the time-critical sensing tasks, such as disaster rescue and environment monitoring. To minimize the overall mission completion time in such delay constrained multi-task UAV-based sensing applications, it is imperative to properly design the inter-task trajectory, the UAV-BS association, and the sensing order. Nonetheless, finding the optimal sensing scheme is highly non-trivial since these three sub-problems are tightly coupled and involve non-convex constraints. To overcome these challenges, firstly, a novel space pruning based trajectory search (SPTS) algorithm is proposed by exploiting the geometric characteristics of the optimal inter-task UAV trajectory, which can achieve a substantially faster convergence as compared to the Ployblock algorithm. Secondly, a novel optimal UAV-BS association (OUBA) algorithm is presented to quickly identify the best BS for each sensing task. Thirdly, by combining these two proposed algorithms with the Lin-Kernighan-Helsgaun (LKH) algorithm, a lower bound of the mission completion time can be efficiently computed and a near-optimal solution can be obtained. Numerical simulations demonstrate that significant performance improvement can be achieved by the proposed scheme. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) play a significant role in various 5G or Beyond-5G (B5G)-enabled Internet-of-Things (IoT) applications. However, the UAV performance in an air-ground cooperative network is significantly affected by its mobility and air-to-ground (A2G) communication and computation behaviors. In this paper, a UAV-oriented computation offloading system is investigated, where the UAV desires to complete its onboard computation demands with the assistance of a ground edge-computing infrastructure, i.e., a road-side unit (RSU). The objective is to maximize the energy efficiency of the UAV. Specifically, a non-convex constrained optimal control problem is formulated to optimize the overall energy efficiency of UAV by jointly considering the coupled effects of UAV's longitudinal mobility, A2G communication, and computation dynamics. To address the coupled complexity and non-convexity of the original problem, a primal decomposition approach is developed to transform the problem into a convex subproblem and a primary problem, and then a closed-form optimal transmission power control is derived by solving the subproblem, which is dependent on mobility information. By embedding the closed-form optimal power control into the primary problem, a gradient projection-based iterative algorithm is proposed to obtain a joint optimal solution for both the longitudinal acceleration control and the power control, the feasibility and convergence of which is also theoretically proven. Extensive simulations have been conducted to validate the effectiveness of the proposed method in terms of constraint satisfaction and convergence speed, and comparative results also demonstrate that it can outperform other benchmark methods in terms of global energy efficiency. [ABSTRACT FROM AUTHOR]

In the finite blocklength scenario, which is suitable for practical applications, a method of maximizing the average effective secrecy rate (AESR) is proposed for a UAV-enabled secure communication by optimizing the UAV's trajectory and transmit power subject to the UAV's mobility constraints and transmit power constraints. To address the formulated non-convex optimization problem, it is first decomposed into two non-convex subproblems. Then the two subproblems are converted respectively into two convex subproblems via the first-order approximation. Finally, an alternating iteration algorithm is developed by solving the two subproblems iteratively based on successive convex approximation (SCA) technique. Numerical results show that our proposed scheme can achieve a 6% to 13% improvement on the AESR performance compared with the benchmark schemes. [ABSTRACT FROM AUTHOR]

Due to the small size, low cost, and autonomous nature, unmanned aerial vehicles (UAVs) have attracted growing attention in improving traditional networks’ performance. This paper considers a multi-UAV enabled large-scale wireless recharge networks, where a group of UAVs is dispatched as mobile wireless power transfer, and information collection systems to serve a set of ground low-power sensor nodes. Specifically, the UAVs employ radio frequency (RF) wireless power transfer (WPT) to supply energy towards the sensor nodes, and the communication services are available via wireless information transfer (WIT) systems. To achieve balanced energy consumption among UAVs, we maximize the energy utilization efficiency of UAVs, and minimize the communication delay by optimizing the trajectory jointly with constraints of the energy capacity, and the area of the target region. The formulated problem is a mixed-integer programming problem that is a variation of multiple traveling salesman problem. Thus we present a heuristic algorithm that combines the evolutionary algorithm, and variable neighborhood search to achieve the optimal visited sequence of the sensor nodes. Finally, extensive numerical results are provided to evaluate the performance of the proposed algorithm. It draws new insights on the estimation of the feasibility of the given UAVs whose energy capacity is limited. [ABSTRACT FROM AUTHOR]

This paper considers a rotary-wing unmanned aerial vehicle (UAV)-enabled wireless power transfer system, where a UAV is dispatched as an energy transmitter (ET), transferring radio frequency (RF) signals to a set of energy receivers (ERs) periodically. We aim to maximize the energy harvested at all ERs by jointly optimizing the UAV's three-dimensional (3D) placement, beam pattern and charging time. However, the considered optimization problem taking into account the drone flight altitude and the wireless coverage performance is formulated as a non-convex problem. To tackle this problem, we propose a low-complexity iterative algorithm to decompose the original problem into four sub-problems in order to optimize the variables sequentially. In particular, we first use the sequential unconstrained convex minimization based algorithm to find the globally optimal UAV two-dimensional (2D) position. Subsequently, we can directly obtain the optimal UAV altitude as the objective function of problem is monotonic decreasing with respect to UAV altitude. Then, we propose the multiobjective evolutionary algorithm based on decomposition (MOEA/D) based algorithm to control the phase of antenna array elements, in order to achieve high steering performance of multi-beams. Finally, with the above solved variables, the original problem is reformulated as a single-variable optimization problem where charging time is the optimization variable, and can be solved using the standard convex optimization techniques. Furthermore, we use the branch and bound method to design the UAV trajectory which can be constructed as traveling salesman problem (TSP) to minimize flight distance. Numerical results validate the theoretical findings and demonstrate that significant performance gain in terms of sum received power of ERs can be achieved by the proposed algorithm in UAV-enabled wireless power transfer networks. [ABSTRACT FROM AUTHOR]

In the past several years, unmanned aerial vehicle (UAV) have been employed to provide enhanced coverage or relay service to mobile users in a scenario with limited or even no infrastructure since they can be deployed to almost everywhere and can be manipulated at anytime. This paper studies UAV as aerial base station (BS) enabled wireless communication system, where a UAV is dispatched to provide wireless communication service to a set of ground users with difference quality-of-experience (QoE) requirements. In real world, user requirements are randomly and unevenly distributed. In addition, UAV communication coverage and on-board energy are limited and system resources are also limited (e.g., transmission power, spectrum). In order to meet the QoE of all users with limited system resources and limited UAV energy, we jointly optimize user communication scheduling, UAV trajectory, transmit power and bandwidth allocation to maximize energy-efficiency and satisfy user QoE requirement. The formulated problem is mixes integer non-convex and non-concave so it is difficult to solve. In this paper, we solvevv the problem with two steps as follows. Firstly, we transform the objective function into a tractable form. Secondly, we divide the optimal problem into four sub-optimal problems, and then use a powerful iterative algorithm with the Dinkelbach and block coordinate descent to solve the optimal problem. That is to say, the user scheduling, UAV trajectory, transmission power and bandwidth allocation are alternately optimized in each iteration. Extensive simulation results present that our proposed method can obtain higher energy efficiency than that of baselines. Specifically, the energy efficiency obtained by our proposed method is 12.5% higher than the approach that only maximizes throughput. [ABSTRACT FROM AUTHOR]

This paper studies the physical layer security of an unmanned aerial vehicle (UAV) network, where a UAV base station (UAV-B) transmits confidential information to multiple information receivers (IRs) with the aid of a UAV jammer (UAV-J) in the presence of multiple eavesdroppers. We formulate an optimization problem to jointly design the trajectories and transmit power of UAV-B and UAV-J in order to maximize the minimum average secrecy rate over all IRs. The optimization problem is non-convex and the optimization variables are coupled, which leads to the optimization problem being mathematically intractable. As such, we decompose the optimization problem into two subproblems and then solve it by employing an alternating iterative algorithm and the successive convex approximation technique. Our results show that the average secrecy rate performance of the proposed scheme provides about 20% and 150% performance gains over the joint trajectory and transmit power optimization without UAV-J scheme and the transmit power optimization with fixed trajectory scheme at flight period $T=150$  s, respectively. [ABSTRACT FROM AUTHOR]

This paper investigates unmanned aerial vehicle (UAV) enabled secure communication systems where a mobile UAV wishes to send confidential messages to multiple ground users. To improve the security performance, a cooperative UAV is additionally considered that transmits the jamming signal. In this system, we maximize the minimum secrecy rate among the ground users by jointly optimizing the trajectory and the transmit power of the UAVs as well as the user scheduling. To efficiently solve this nonconvex problem, we adopt block successive upper bound minimization techniques, which address a sequence of approximated convex problems for each block of variables. Numerical results verify that the proposed algorithm outperforms baseline methods. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) are anticipated to be widely deployed in future wireless communications, due to their advantages of high mobility and easy deployment. However, the broadcast nature of air-to-ground line-of-sight wireless channels brings a new challenge to the information security of UAV-ground communication. This paper tackles such a challenge in the physical layer by exploiting the mobility of UAV via its trajectory design. We consider a UAV-ground communication system with multiple potential eavesdroppers on the ground, where the information on the locations of the eavesdroppers is imperfect. We formulate an optimization problem, which maximizes the average worst case secrecy rate of the system by jointly designing the robust trajectory and transmit power of the UAV over a given flight duration. The nonconvexity of the optimization problem and the imperfect location information of the eavesdroppers make the problem difficult to be solved optimally. We propose an iterative suboptimal algorithm to solve this problem efficiently by applying the block coordinate descent method, $\mathcal {S}$ -procedure, and successive convex optimization method. Simulation results show that the proposed algorithm can improve the average worst case secrecy rate significantly, as compared to two other benchmark algorithms without robust design. [ABSTRACT FROM AUTHOR]

In future mobile networks, it is difficult for static base stations (BSs) to support the rapidly increasing data services, especially for cell-edge users. Unmanned aerial vehicle (UAV) is a promising method that can assist BSs to offload the data traffic, due to its high mobility and flexibility. In this correspondence, we focus on the UAV trajectory at the edges of three adjacent cells to offload traffic for BSs. In the proposed scheme, the sum rate of UAV-served edge users is maximized subject to the rate requirements for all the users, by optimizing the UAV trajectory in each flying cycle. The optimization is a mixed-integer nonconvex problem, which is difficult to solve. Thus, it is transformed into two convex problems, and an iterative algorithm is proposed to solve it by optimizing the UAV trajectory and edge user scheduling alternately. Simulation results are presented to show the effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]