Search

The article discusses about the special section on cross-layer design for mobile ad hoc networks and wireless sensor networks published within the May 01, 2006 issue in the U.S. The first section, which consist of seven papers, focuses on the capacity analysis/enhancement and quality-of-service support. The following papers, from eight to twelve, address the routing issues. In addition, four paper after the 12th explores the idea of cross-layer design.

Wireless channel characterization and modeling is the foundation of vehicular communication systems. However, most of the existing researches on vehicle-to-vehicle (V2V) channel are aimed at the traditional scenarios such as urban and suburban, and the researches on some complicated vehicular scenarios are insufficient. For example, little attention is paid to viaduct, tunnel, and cutting scenarios in vehicular communications, and these complex scenarios often become the high-incidence area of communication interruption, and then affect the overall performance of the vehicular communication system due to the bad and unique channel characteristics. In this paper, to fill this gap, time-varying characteristics of V2V channels in viaduct, tunnel, and cutting scenarios are investigated. Specifically, based on 5.9 GHz channel measurements, channel non-stationarity is quantitatively evaluated and compared. Further, a detailed analysis of time-varying power and delay of multipath components (MPCs) is presented. Based on the obtained results, the mechanism of physical environment affecting channel characteristics is analyzed, and the impacts of vehicular scenarios are quantified. Besides, the impacts of scenarios on the spatial distribution of MPCs are investigated. The angular distributions of MPCs in the three typical V2V scenarios are revealed, and the corresponding statistical characteristics are presented. Moreover, the characteristics of MPC clusters in different scenarios are further quantified and analyzed, such as MPC number in each cluster and cluster lifetime. It is revealed that the non-stationarity of the V2V channel originates from the birth-death process of MPC clusters, and the birth-death process is modeled statistically. The results in the paper show the V2V channel propagation mechanism and can be used for the design of vehicular communication systems in complicated scenarios. [ABSTRACT FROM AUTHOR]

Radio signal recognition has a wide application in future communication systems and the vehicular communication, whose core is the extraction of signal features such as electromagnetic fingerprints. With the rapid development of artificial intelligence technology, deep learning has made amazing breakthroughs in image recognition, speech recognition and other fields. Deep learning is applied to electromagnetic fingerprint extraction in this paper. Firstly, thousands of the downlink aircraft communications addressing and reporting system (ACARS) signals used for communication between civil aircraft and airport tower are collected and generated. Then a pre-transformation network suitable for electromagnetic signals is constructed to convert one-dimensional signals into two-dimensional feature maps, and afterwards the feature maps are input into the convolutional neural network (CNN) for classification. By adopting the attention modules, the classification results were improved by a few percentage points over the baseline with a little cost. The method proposed in this paper achieves an accuracy rate of 94.1% and can obtain the aircraft type in a shorter time than traditional method. Moreover, the robustness of the proposed model in response to additive Gaussian white noise (AWGN) and phase deviation is studied and tested. [ABSTRACT FROM AUTHOR]

The mobile traffic explosion has caused spectrum shortage and polarization of data usage among users, which will eventually decrease user welfare (UW) in mobile communication services. Governments around the world are planning to make more spectrum available for mobile broadband use, and the key policy issue is to find an efficient spectrum allocation method that will improve UW. In this paper, we propose a data subsidy scheme where the regulator offers a spectrum price discount to mobile network operators (MNOs) in return for imposing the responsibility of providing a predefined data amount to users free of charge. To analyze the subsidy effect, we adopt the two-stage approach of Cournot and Bertrand competition and find a Nash equilibrium (NE) of the competition. An interesting observation is that the increase in UW does not involve MNO profit (MP) loss and that the increasing amount is higher than the regulator's expenses for implementing the data subsidy scheme. Most of the paper concerns the duopoly competition, which is finally extended to the general case. [ABSTRACT FROM PUBLISHER]

Nowadays, wireless communication has become a fabric of our daily life, and it has been a universal demand for higher capacity and longer battery lifetime. For the sake of solving these problems, this paper considers taking the advantage of cooperative communication with the assistance of green relays. So, in this paper, we design an auction market that is composed of one base station (acts as the auctioneer), multiple green relays (act as sellers), and multiple mobile terminals (act as buyers). The terminals need to pay for the cooperative service, and the relays sell it for revenue. In addition, the terminals can raise their bid according to their residual energy; thus the terminals that lack energy have more opportunities to get cooperative service to avoid energy exhaustion. At the same time, the relays can reduce the price based on their instantaneous energy harvesting amount, and, hence, the relays can serve more terminals when they can harvest more energy from the environment. This paper also proposes three different auction rules to show the effect of relay selection. Furthermore, power allocation among relays and terminals is adopted to minimize the power consumption of terminals under the SNR requirement. Simulation results show that the three relay selection rules perform diversely and have their own advantages and disadvantages, but all of them can improve system capacity and prolong the lifetime of the mobile terminals effectively. And, with power allocation, the terminal can utilize the least energy to achieve its SNR requirement. [ABSTRACT FROM AUTHOR]

A ticket dispenser (TD) is used to assist customers with the waiting process in, e.g., a restaurant. This paper deploys a mobile TD system (MTDS) with waiting time prediction to enhance the user experience while waiting. For example, the MTDS for a restaurant allows a customer to remotely draw a ticket for a meal order anywhere through a smartphone before she/he arrives at the restaurant and therefore reduces her/his waiting time. The developed MTDS system can dynamically adjust the predicted waiting time. We propose two output indicators and develop a discrete-event simulation model to investigate the performance of the predicted time adjustment (PTA) mechanism for the MTDS. With a proper frequency of recalculation for the predicted waiting times, this paper indicates that the waiting times can be more accurately predicted without consuming more wireless network resources and power of mobile devices. [ABSTRACT FROM PUBLISHER]

The 21st century is defined as the era of technological development. With drastic increase in population, automation is becoming the need of the hour in order to make life more comfortable and easy. Due to the advancement and development in the field of automation and embedded system, the notion of smart car has become very popular. Smart cars are modernizing trends in the traditional automobile industry. Companies across the globe have been investing a huge amount of resources on the production and design of smart cars. Every technological development needs to overcome certain obstacles, and hence, in this paper, a design of a collision detection system for smart car using light fidelity (Li-Fi) and ultrasonic sensor on the Arduino platform is proposed. This design consists of an ultrasonic sensor, an Arduino processor, and a Li-Fi circuit. The ultrasonic is used for measurement of distance between vehicles, and Arduino processes the data and makes decisions accordingly. Data transmission between vehicles is ensued using a Li-Fi transmitter circuit and a Li-Fi receiver circuit. The transmitter circuit is mounted on the tail lights of the leading car and the receiver circuit is mounted on the front side of the car that follows. Using visible light communication, the transmitter circuit transmits the calculated speed and the information is received by the receiver circuit of the second car. On the basis of the information received, the speed of the second car is changed in order to avoid collision. In this paper, a system that can detect and thus avoid collision between vehicles and prevent accidents is proposed and studied. [ABSTRACT FROM AUTHOR]

Vehicle-to-vehicle (V2V) communication based on the device-to-device (D2D) communication in long term evolution (LTE) system is emerging as a key enabler for connected vehicles today. In this paper, we consider safety-related messages periodically transmitted by vehicle to announce its current status to other neighboring vehicles. The current state-of-the-art LTE V2V communication uses greedy algorithm for the transmission of such periodic messages. Greedy algorithm is known to have decent performance, but the performance is limited due to the lack of a collision–detection mechanism. In this paper, we proposefeedback-aided greedy algorithm (FAGA)to complement the drawback of greedy algorithm. We evaluate FAGA via realistic simulations to show that it outperforms comparison schemes in terms of overall message reception ratio (MRR). As a result, it is shown that FAGA operates well even with small amount of feedback and its performance is close to the performance of centralized scheduling method. Moreover, FAGA outperforms greedy algorithm by up to 23.7% in terms of MRR performance. [ABSTRACT FROM AUTHOR]

In an infrastructure-based wireless network, including mobile users and vehicles, many crucial and important services are provisioned by a centralized server. However, due to damaged infrastructure and increased mobility caused by an emergency, maintaining continuous service coverage in such a network can be challenging. Although several prediction-based replication methods have been proposed to achieve service coverage through replication of the central server, they are unable to accurately predict future topological changes and thus maintain service coverage in a post-emergency network. These topological changes are, in fact, directly related to user mobility. Nevertheless, existing mobility models are unable to realistically represent post-emergency user movements. Consequently, at first, this paper proposes a realistic mobility model that includes users' post-emergency complex behavioral changes. Subsequently, this paper proposes a machine-to-machine (M2M) networking-based service coverage framework for post-emergency environments. The proposed framework performs not only accurate prediction of the proposed user mobility but also optimal replication, utilizing these predictions, of the central server to achieve continuous service coverage. In addition, the framework requires no supervision and fewer resources to perform these functions due to use of the M2M networking. Simulation results are further used to verify the effectiveness of proposals presented in this paper. [ABSTRACT FROM PUBLISHER]

The use of multi-interfaced devices has been steadily increasing due to the popularity of multihomed streaming services in heterogeneous wireless access networks. However, running multiple interfaces simultaneously in a mobile terminal (MT) may cause serious battery drain even when interfaces employ sleep modes. In addition, sleep modes may result in significant degradation of the quality of service (QoS) in terms of packet delay or jitter. This paper examines multihomed MTs and the use of data stripping load distribution across the multiple wireless interfaces of the MTs to minimize their power consumption. This paper then develops a theoretical framework for a power-efficient multipath load distribution that encompasses a dynamic load distribution to each interface employed with sleep mode. For this purpose, the paper first presents analytical models for power consumption and the delay of each interface by considering a medium access control (MAC) operation. Using these models, two simple greedy distribution algorithms are proposed to optimize the load distribution. Extensive simulations in an ns-2 simulator under various practical configurations demonstrate that the proposed algorithms significantly reduce power consumption while satisfying QoS constraints. [ABSTRACT FROM PUBLISHER]

In this paper, we study an uplink network configuration in a two-tier macro–femto heterogeneous system with hybrid access control. We consider a system where one macro base station (MBS) and a cluster of adjacent femto base stations (FBSs) together serve a number of mobile users. In this system, base stations and users make decisions in various network configuration processes with different optimization objectives. Such decision-making processesz are usually correlated, and an efficient mechanism is needed to coordinate the decision makers. In this paper, we propose a five-stage network configuration mechanism where access control, resource allocation, and power management are sequentially performed at the base stations and users, respectively. We show that this mechanism provides incentive for the FBSs to operate at the hybrid access mode. We model the configuration mechanism as a multistage decision-making process and formulate a multilevel optimization problem. We analyze the problem in a bottom-up manner and propose efficient algorithms to solve the optimization problem in each level sequentially. Simulation results show that the proposed network configuration mechanism achieves a higher system utility than configuration mechanisms with topology-based hybrid access or closed access. [ABSTRACT FROM AUTHOR]

The explosively increasing traffic demand in the fifth generation (5 G) mobile communication system has made the limited licensed spectrum quite competitive. Such status quo motivates the development of new radio (NR) based access to the unlicensed band, which is a promising solution for system performance enhancement. In this paper, we focus on the coexistence between the NR system and the WiFi system based on the duty cycle mechanism. Firstly, an optimization model is formulated to maximize the throughput of the NR system in the unlicensed band (NR-U) via the joint bandwidth and transmission opportunity allocation under the fairness requirement. Then, to solve this optimization problem, we convert it into a Markov decision process with continuous action space, based on which a deep deterministic policy gradient (DDPG) based coexistence algorithm is proposed. At last, simulation results show that the proposed algorithm can ensure the coexistence between the NR-U system and the WiFi system from three aspects. Firstly, the throughput improvements of the NR-U system under different fairness thresholds and different number of user equipments and access points are illustrated. Secondly, the proposed algorithm adapts to the dynamic situations of varying fairness thresholds and channel conditions. Thirdly, the effectiveness of the proposed algorithm is validated with at least 5.01% throughput improvement by comparing with proportional scheme, average scheme and Q-learning scheme. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the joint sub-channel and power allocation problem for cellular vehicle-to-everything (V2X) communications, where multiple vehicle-to-infrastructure (V2I) users share the spectrum resources with vehicle-to-vehicle (V2V) users. In particular, a novel channel state information (CSI)-independent decentralized algorithm based on multi-agent reinforcement learning (MARL) is proposed to maximize the sum throughput of V2I links while meeting the latency and reliability requirements of V2V links. Specifically, we implement the individual double dueling deep recurrent Q-networks (D3RQN) and the carefully designed common reward to train the implicitly collaborative agents, through which, each agent optimizes the policy individually based solely on local CSI-independent observations. To handle the non-stationarity induced by multi-agent concurrent learning, we incorporate hysteretic Q-learning and concurrent experience replay trajectory (CERT) to stabilize the training process. Besides, we incorporate the approximate regretted reward (ARR) to alleviate the unstable reward estimation problem caused by shifting environment dynamics. Simulation results demonstrate that the proposed algorithm outperforms the baselines and can achieve close performance compared with the centralized Brute-force method. Furthermore, the proposed CSI-independent design exhibits comparable performance as the CSI-involved version, which sheds some light on the potential to further reduce the signalling overhead of machine learning-based vehicular communication systems. [ABSTRACT FROM AUTHOR]

Economical and environmentally friendly geocast (EEFG) uses traffic signals to communicate with approaching vehicles. The communication can be signal-to-vehicle (TLS2V) and vehicle-to-vehicle (V2V). Based on the information sent, the vehicle receiving the message adapts its speed to a recommended speed (SR ) , which helps the vehicle reduce fuel consumption and emissions. Our previous paper entitled “Optimization of Fuel Cost and Emissions Using V2V Communications” develops a model to determine the optimum SR . It also proposes heuristic expressions to compute the optimum or near-optimum SR. [ABSTRACT FROM PUBLISHER]

In this paper, we propose low-complexity algorithms for downlink traffic scheduling in green vehicular roadside infrastructure. In multiple roadside unit (RSU) deployments, the energy provisioning of the RSUs may differ, and it is therefore desirable to balance RSU usage from a normalized min-max energy viewpoint. This paper considers both splittable RSU assignment (SRA) and unsplittable RSU asssignment (URA) scheduling. An offline integer linear programming bound is first derived for normalized min-max RSU energy usage. We then show that in the SRA case, there is a polynomial complexity 2-approximation bound for the normalized min-max energy schedule. This paper then proposes several online scheduling algorithms. The first is a greedy online algorithm that makes simple RSU selections, followed by minimum-energy time slot assignments. A normalized min-max algorithm is then proposed [2-approximation online algorithm (TOAA)], which is an online version of the 2-approximation bound. Two algorithms are then introduced based on a potential function scheduling approach. The 1-objective algorithm uses an objective based on normalized min-max energy, and we show that it has an upper bounded worst-case competitive ratio performance. The 2-objective algorithm uses the same approach but incorporates a total-energy secondary objective as well. Results from a variety of experiments show that the proposed scheduling algorithms perform well. In particular, we find that in the SRA case, the TOAA algorithm performs very close to the lower bound but at the expense of having to reassign time slots whenever a new vehicle arrives. In the URA case, our low-complexity 1-objective algorithm performs better than the others over a wide range of traffic conditions. [ABSTRACT FROM PUBLISHER]

Proximate cloud computing enables computationally intensive applications on mobile devices, providing a rich user experience. However, remote resource bottlenecks limit the scalability of offloading, requiring optimization of the offloading decision and resource utilization. To this end, in this paper, we leverage the variability in capabilities of mobile devices and user preferences. Our system utility metric is a measure of quality of experience (QoE) based on task completion time and energy consumption of a mobile device. We propose a heuristic offloading decision algorithm (HODA), which is semidistributed and jointly optimizes the offloading decision, and communication and computation resources to maximize system utility. Our main contribution is to reduce the problem to a submodular maximization problem and prove its NP-hardness by decomposing it into two subproblems: 1) optimization of communication and computation resources solved by quasiconvex and convex optimization and 2) offloading decision solved by submodular set function optimization. HODA reduces the complexity of finding the local optimum to O(K^3), where $K$ is the number of mobile users. Simulation results show that HODA performs within 5% of the optimal on average. Compared with other solutions, HODA's performance is significantly superior as the number of users increases. [ABSTRACT FROM PUBLISHER]

Cellular heterogeneous networks (HetNets), which are realized through shared carrier deployments of macrocells and small cells, are widely seen as a potential solution to serve growing data capacity demands. While these networks pose significant challenges in interference management, much of the focus in earlier efforts has been limited only to small-cell range expansion in the downlink. In this paper, we provide a comprehensive analysis of interference management techniques applicable to the uplink of cellular HetNets, with the goal of characterizing and improving edge user (e.g., 5th percentile) performance. In particular, we propose and study virtual soft-handoff (VSHO), which offers a low-complexity and low-overhead solution that exploits the link asymmetry observed in the uplink geometry of HetNets. VSHO exploits the fact that, in the uplink, an edge macro user who suffers from very low throughput may be closer to a nearby small cell than its own macrocell. The intuition is that such macro users should have better decoding opportunity when their signals are processed at the nearby small cell with better channel conditions. We also study how interference cancelation (IC) and interference avoidance through resource blanking can be incorporated into our VSHO proposal for further throughput gains. In addition to the VSHO techniques outlined in this paper, we also analyze other candidate techniques available in the Third Generation Partnership Project Long-Term Evolution (3GPP-LTE), such as cell-range expansion (CRE) and joint processing, to present a unified view of interference management options available in HetNets. [ABSTRACT FROM PUBLISHER]

In this paper, we study the problem of delay-constrained data transmission in mobile opportunistic device-to-device networks. In contrast to the deterministic or greedy single-copy single-path (SCSP) and multicopy multipath (MCMP) routing schemes that have been discussed in the literature, we develop a planned opportunistic routing scheme that aims to determine the optimal single-copy multipath (SCMP) transmission strategy that satisfies the delay requirement and, at the same time, minimizes communication cost. We first address the unicast by formulating the optimization problem and developing a distributed routing algorithm under practical network settings. Then, we explore optimal multicast strategies based on the SCMP transmissions. We implement the proposed algorithms on Android tablets and carry out extensive experiments, each with 25 nodes, for a period of two weeks. Moreover, we extract the algorithm codes from our prototype and run simulations based on the Haggle trace to study performance trends under various network settings. The experimental and simulation results show that the proposed protocols achieve significant performance gain in comparison with their counterparts based on SCSP and MCMP transmissions. [ABSTRACT FROM PUBLISHER]

This paper evaluates the practically achievable best error performance obtained from a dimmable visible light communication (VLC) system that conveys information using binary modulations, such as on-off keying (OOK). As compared to previous studies that address the ideal performance of dimmable VLC systems only over reliable channels with arbitrarily small error probability, this paper presents the best achievable error probability of various configurations with the dimming targets, signal quality, and data rate. The numerical results establish the ultimate decoding error performance targeted for dimmable VLC systems and are expected to provide a practical guideline for the enhanced VLC system design. [ABSTRACT FROM AUTHOR]

This paper presents the analysis of short-term fading behavior in high-speed railway (HSR) communication networks, based on passive channel measurements. A long-term evolution (LTE)-based channel sounding system is used to measure the propagation characteristics in a dedicated HSR LTE network with multiple scenarios, such as rural, station, and suburban, and with the echo channel effect (ECE) caused by the same signaling from different remote radio units. The measurement data are partitioned into four cases, involving rural, rural with the ECE, station, and suburban, aiming to investigate the impact of two factors, e.g., the scenario and the ECE, on the propagation characteristics. Based on the processed data, the short-term fading behavior is characterized in terms of the fading severity and the time-frequency-space dispersion in the four cases. The distance-dependent models and statistical models of Ricean K-factor, delay spread, Doppler spread, and angular spread are proposed and compared with previous paper. The presented results will be useful in time-frequency-space channel modeling for future HSR mobile communication systems. [ABSTRACT FROM AUTHOR]

To promote the massive video content delivery and to realize the long-term overall cost, the caching and computing functions have to be installed at some intermediate nodes within the networks. This paper presents a cache-aware multicast beamforming design for multicell multigroup multicast, where information-centric networking and mobile edge computing techniques are brought in the multicell multicast system to cache and transcode the contents passing through the nodes. The proposed cache-aware multicast beamforming design jointly optimizes the multicast mode, the caching strategy, and the network-wide beamforming vector, and focuses on minimizing the energy cost of the caching, computing, and communications. To make the formulated problem tractable, a two step method is proposed in this paper, where the first step is devoted to the cache-aware multicast approach design, while the second step is focused on the sparse multicast beamforming design. Furthermore, in order to promote the stabilization of the system, we further design a robust joint optimization strategy for the scenario with the imperfect channel state information. Extensive simulations are conducted to evaluate the performance of our proposed schemes. [ABSTRACT FROM AUTHOR]

A method to locate the position of the target vehicle with the aid of infrared signal-direction discrimination for short-range vehicle-to-vehicle communications is proposed in this paper. With the use of two one-dimensional (1-D) signal-direction discriminators mounted on a vehicle with a lateral separation between them to measure the coming directions of the signal emitted from another target vehicle, the position of the target vehicle relative to this detecting vehicle can be located by triangulation. The aforementioned 1-D signal-direction discriminator is composed of two planar receiving modules forming a specific geometric structure, which leads to different responsivities of these individual receiving modules for a signal incident from a definite direction. The coming direction of the signal is determined by comparing the signal strengths received by these individual receiving modules. With a proposed hardware and software implementation, the position of the target vehicle can be accurately determined within a longitudinal range of 50 m. Owing to the restriction of the width of the vehicle, the separation of the signal-direction discriminators mounted on the vehicle cannot exceed 1.8 m. This leads to the consequence that in the remote region any small inaccuracy of the measured signal directions may cause very large position error. However, our measured results reveal a specific characteristic of the distribution of the measured positions for the target vehicle at a definite location. This allows us to design deliberate statistical algorithms to accurately extract the position of the target vehicle in the remote region. Using the simplest statistical algorithm, we are able to locate the position of the target vehicle with acceptable accuracy within a longitudinal range of 80 m. In this paper, we show the feasibility and applicability of this method. Furthermore, improvement is foreseeable with more deliberate design of hardware and software. [ABSTRACT FROM AUTHOR]

The thirteen articles in this special section are devoted to mobile multimedia communications with a focus on green-based services. The objective of this special section is to cover the most recent research and development on the enabling technologies for green mobile multimedia communications and to stimulate discussions on state-of-the-art and innovative aspects in the field. [ABSTRACT FROM PUBLISHER]

In this paper, we propose a physical layer secret key (PLSK) generation scheme for secure encrypted transmissions in orbital angular momentum (OAM) communication systems which improves the secret key capacity via taking advantage of OAM orthogonal modes. Based on the line-of-sight (LoS) quasi-static channel conditions in OAM systems, we propose a mode-based active defense phase in the PLSK scheme to invalidate keys generated by an eavesdropper when it is extremely close to the legitimate user. Our simulation results highlight that the key information generated by the eavesdropper is almost zero in the case of highly correlated legitimate and eavesdropping channels under LoS conditions. In addition, our proposed OAM PLSK scheme achieves a higher key generation rate (KGR) than existing works since mode-based active defense can disrupt the process of PLSK by the eavesdropper. [ABSTRACT FROM AUTHOR]

Current and future mobile network access technologies increasingly rely on multiantenna transmission techniques and on cell miniaturization to achieve orders-of-magnitude gains in capacity. In this paper, we propose and evaluate the idea of multiuser multiple-input–multiple-input-based (MU-MIMO) cell reassignments. Dense small-cell deployments make it possible to pair user equipment units (UEs), which were originally assigned to different cells, enabling multiuser MIMO (MU-MIMO) and resulting in performance improvements to both UEs. We discuss how such pairings can be accomplished, and we assess the potential gains in the resulting spectral efficiency and MU-MIMO usage. These are assessed through both discussion of performance bounds and detailed system-level simulation in a realistic outdoor small-cell scenario. [ABSTRACT FROM PUBLISHER]

There is an ongoing debate in the research and industry communities as to whether IEEE 802.11p or Third-Generation Partnership Project (3GPP) Long-Term Evolution (LTE) should be used for vehicular communications. In this paper, we argue that a hybrid vehicular network combining both technologies can increase the performance of the system. We first propose a mechanism to improve location-based routing in a hybrid vehicular network architecture by data and signaling traffic separation on independent wireless networks. We then develop analytical models to calculate the stochastic upper bound of the end-to-end delay (E2ED) for location-based routing in three different networking architecture alternatives based on a) short-range ad hoc only, b) cellular only, and c) the proposed hybrid ad hoc/cellular network. The analytical approach in this paper is based on the stochastic network calculus (SNC) theory, which provides a solid and uniform framework for analysis of the upper bound of the E2ED in communication networks. It is demonstrated that the proposed hybrid network provides a lower E2ED compared with the other two alternatives. Comparisons of realistic simulation results, carried out in NS-3, and analytical results show that the proposed delay bounds provide relatively tight approximations for the E2ED in the three alternative architectures for vehicular networks investigated in this paper. [ABSTRACT FROM PUBLISHER]

This paper presents the detailed design and the key system performance results of a comprehensive laboratory demonstrator (testbed) for a hybrid satellite/terrestrial S-band mobile digital broadcasting system. The physical layer is based on an enhanced version of the digital video broadcasting—satellite to handheld (DVB-SH) standard, exploiting dual-polarization multiple-input–multiple-output (MIMO) technology. This complete digital MIMO demonstrator, which is the first of its kind, allows for an in-depth verification and optimization of the MIMO techniques applied to satellite broadcasting networks. Moreover, this demonstrator allows for complementing and confirming the theoretical or simulation-based findings published thus far. It is shown that dual-polarization MIMO diversity is able to provide remarkable gains in terms of satellite/terrestrial transmit power reduction and/or capacity increase compared with more conventional non-MIMO solutions. It is also demonstrated that the adoption of a relatively simple spatial multiplexing MIMO technique represents the best way to grasp these gains. This paper provides an extensive set of laboratory measurement results for existing stochastic satellite and hybrid MIMO channels, as well as results based on an S-band satellite-measured dual-polarization time series recently collected during a campaign sponsored by the European Space Agency. Results obtained using MIMO techniques are also compared with a dual- and single-polarization single-input–single-output (SISO) DVB-SH benchmark system and with computer simulation results. [ABSTRACT FROM AUTHOR]

In this paper, we study sleeping control (SC) and power matching (PM) for a single cell in cellular networks with bursty traffic. The base station (BS) sleeps whenever the system is empty and wakes up when N users are assembled during the sleep period. The service capacity of the BS in the active mode is controlled by adjusting its transmit power. The total power consumption and average delay are analyzed, and based on this, the impact of parameter N and transmit power on the energy–delay tradeoff is studied. It is shown that, given the average traffic load, the more bursty the traffic is, the less total power consumed, although the delay performance of more bursty traffic is better only under certain circumstances. The optimal energy–delay tradeoff is then obtained through joint SC and PM optimization. The relationship between the optimal control parameters and the asymptotic performance are also provided. Moreover, the influence of the traffic autocorrelation is explored, which shows less impact on the system performance compared with that of the burstiness. Numerical results show the energy saving gain of the joint SC and PM scheme, as well as the impact of burstiness on the optimal energy–delay tradeoff. [ABSTRACT FROM AUTHOR]

Densely deployed cellular wireless networks, which employ small cell technology, are being widely implemented. Mitigating the impact of inter- and intracell signal interferences induced by the operations of these networks is a challenging yet essential task. In this paper, we consider adaptive rate scheduling for a transmitting node, regardless of whether it is a base station (BS) or a mobile user. We aim to maximize the system's throughput through the employment of fractional frequency reuse (FFR) schemes. Each BS employs either an omnidirectional or a directional antenna system. We derive the optimal configuration of the FFR scheme and evaluate the ensuing system's performance behavior under absolute and proportional fairness requirements. To maximize the attained throughput by mobiles, we determine the best method to use to classify cell users into interior and edge mobiles. The bandwidth levels allocated for serving interior and edge mobiles are optimized. We derive approximate closed-form mathematical expressions for calculating the probability distributions of the interference signal levels measured at the destined receivers. We account for the impact of the classification process on intercell interference power levels. Under an absolute fairness requirement, we show that optimally configured FFR schemes lead to much enhanced performance. We show that the optimally configured directional-FFR schemes increase the throughput capacity by a factor of about 60% relative to that obtained by using optimal omnidirectional-FFR schemes. The analyses and simulation results presented in this paper serve to characterize the performance behavior attainable by using such small cell deployed cellular wireless network systems when employing the underlying configurations. [ABSTRACT FROM AUTHOR]

The results of a wideband channel measurement campaign carried at Ku-band and X-band are presented and discussed in this paper. The propagation effects in the satellite-to-mobile radio link due to the environment surrounding the terrestrial terminal have been characterized using a sweep time delay cross-correlation (STDCC) sounder. The campaign was carried out in four different environments: wooded, rural, suburb and urban. From these results, we obtained the root-mean-square delay spread and coherence bandwidth of the radio channel. The low coherence bandwidth values found for urban and suburb environments suggest that channel equalization would be needed for high-data-rate services. The delay spread values for these two environments are also larger than for wooded and rural environments. A detailed analysis of the results shows that three-state semi-Markov narrow-band channel models for satellite communications could be easily extended to wideband. [ABSTRACT FROM AUTHOR]

In this paper, we propose a heterogeneous framework to deliver smart grid (SG) data cost effectively. The data generated by distributed SG loads, and generation units should be delivered to the utility control center (UCC) within the tolerated delay, which is crucial for SG applications. To this end, a heterogeneous communication framework is proposed, where the cellular network (CN) provides ubiquitous yet expensive data transmission, and vehicle-assisted device-to-device (D2D) communications are leveraged to offload the CN by delivering the delay-tolerant SG data in a store–carry–forward fashion with low cost. To improve the offloading and cost performance of the proposed framework, we put effort in the following aspects: 1) optimal forwarding schemes to optimally select vehicles to carry and forward the data; and 2) mode selection and dynamic resource allocation to maximize the amount of data delivered by D2D communications, reduce the cost of SG data delivery, and guarantee the fairness among SG users. Simulation results are given to validate proposed approaches and demonstrate that the proposed framework is efficient in saving cost for the utility and offloading the CN. [ABSTRACT FROM AUTHOR]

Numerous approaches have been proposed to solve shortest path query problems (SPQPs) in either static or time-dependent spatial networks; however, these approaches are neither appropriately nor efficiently used to find the nearest shelter with fastest paths in disaster evacuations. In disasters, segments of a path computed and saved as the fastest might become impassable. The nearest shelter differs for people depending on their locations and can also change on the basis of an unpredictable and highly dynamic edge cost (e.g., maximum passable vehicle speed), which is influenced by disaster events. To solve this problem, this paper proposes a dynamic network model, which is called an event-dependent network, to represent a spatial network in a disaster. Effective approaches using multiple algorithms are proposed for on-the-fly computation of the nearest shelter and fastest paths in a disaster. A distributed system consisting of a server and multiple mobile clients using our approaches is presented for navigating the fastest paths for people to evacuate a disaster area. Real-world maps, such as a map of California, were used in our experiments. The results revealed that our approaches require less than 2 ms to find a new nearest shelter and its fastest paths, which is faster than other approaches for solving the fastest-path problem. [ABSTRACT FROM AUTHOR]

Online social networks have become increasingly popular. One of the interesting applications is the friend locator, in which the application server informs a user through a mobile device if some of his/her listed friends are close enough in terms of geographical locations. However, in such services, it is challenging to protect the privacy of the individual users. Previous solutions for the friend locator do not guarantee a high level of privacy and do not maintain efficiency. In this paper, we propose a dual-resolution system structure to guarantee both strong privacy and efficiency. Additionally, we use the polygon decomposition method to achieve both accuracy and flexibility. To be more specific, in the coarse resolution level, each regular mobile user uploads his/her encrypted coarse location information to a central server periodically for comparisons. If a regular mobile user is found to be in the same grid block as an active mobile user, then the friend locator procedure with a higher resolution level will be conducted. Finally, through numerical analysis and simulations, we show that the proposed system design and algorithm can achieve high privacy, efficiency, accuracy, and flexibility. [ABSTRACT FROM PUBLISHER]

Simultaneous wireless information and power transfer (SWIPT) has recently drawn significant interest for its dual use of radio signals to provide wireless data and energy access at the same time. However, a challenging secrecy communication issue arises as the messages sent to the information receivers (IRs) may be eavesdropped upon by energy receivers (ERs), which are presumed to harvest energy only from received signals. To tackle this problem, we propose in this paper an artificial-noise (AN)-aided transmission scheme to facilitate the secrecy information transmission to IRs and, yet, meet the energy harvesting requirement for ERs, under the assumption that the AN can be canceled at IRs but not at ERs. Specifically, the proposed scheme splits the transmit power into two parts: to send the confidential message to the IR and an AN to interfere with the ER, respectively. Under a simplified three-node wiretap channel setup, the transmit power allocations and power splitting ratios over fading channels are jointly optimized to minimize the outage probability for delay-limited secrecy information transmission or to maximize the average rate for no-delay-limited secrecy information transmission, subject to a combination of average and peak power constraints (APC and PPC) at the transmitter (Tx) and an average energy harvesting constraint at the ER. Both the secrecy outage probability minimization and average rate maximization problems are shown to be nonconvex, and for each, we propose the optimal solution based on the dual decomposition and the suboptimal solution based on the alternating optimization. Furthermore, two benchmark schemes are introduced for comparison where the AN is not used at the Tx and where the AN is used but cannot be canceled by the IR, respectively. Finally, the performances of proposed schemes are evaluated by simulations in terms of various tradeoffs for wireless (secrecy) information versus energy transmissions. [ABSTRACT FROM PUBLISHER]

Mitigation of interference among adjacent radio systems is a topic of growing interest as the spectrum occupation increases. Site-shielding techniques appear as a method of improving millimeter-wave wireless communication system design, allowing frequency reuse and reducing cochannel interference. The viability of applying such techniques to systems operating in frequency bands around 40 GHz is the aim of this paper. Several propagation mechanisms are experimentally studied, including transmission across building obstacles, depolarization, reflection, and diffraction. The performance of some theoretical models of the different scattering mechanisms has been compared with measurement results. The measuring and processing procedures have also been improved. Values of the dielectric parameters of the materials in this frequency band have been obtained and are given in this paper. The attenuation results indicate that various materials, such as mortar, brick, and concrete walls, that present large values of attenuation in decibels per centimeter, can be used to shield base stations, reducing the frequency reuse distance in radio cellular networks. It can also be concluded that there is a significant diffracted field in the shadow region of brick corners. [ABSTRACT FROM AUTHOR]

High-resolution delay-Doppler estimation is an important requirement for automotive radar systems, especially in multi-target scenarios that require better target separation performance. Orthogonal frequency-division multiplexing (OFDM) is a promising candidate waveform for future intelligent transport networks, since it enables the integration of both radar and communication functionalities. Exploring the dual functionality enabled by OFDM, this paper presents a new cooperative method for high-resolution delay-Doppler estimation. The proposed subspace-based method exploits the combination of both the radar and received communication signals to estimate target parameters. The procedure achieves high-resolution delay-Doppler estimation for both uncorrelated, partially correlated and coherent signals, and enables a significant reduction in the required bandwidth when compared to previous approaches which do not exploit the knowledge of the communication signals. Laboratory measurements at 24 GHz and simulation results demonstrate the efficacy of the proposed method for the estimation of multiple targets. [ABSTRACT FROM AUTHOR]

This paper presents a direct voltage control method for interior permanent magnet synchronous motors (IPMSMs) with a single speed regulator. The method achieves maximum torque per ampere (MTPA) operation by controlling the magnitude and the angle of the voltage vector. For that, the mathematical model for the MTPA trajectory of the IPMSM is derived in the voltage plane. As such, no current sensor is needed, which makes the proposed strategy tolerant to current sensors failure unlike cascaded control loop based methodologies. Although no current sensor is used, the control strategy tracks MTPA trajectory by taking into account both voltage and current limits of the machine. The complete MTPA derivation in the voltage plane is presented in this paper; but, only the final solution is needed for real-time implementation. Henceforth, the simplicity of the control scheme combined with its current sensor dependence free characteristics make it a good candidate for real-time implementation in vehicular applications. The concept is developed and evaluated experimentally on a 10-HP IPMSM. [ABSTRACT FROM AUTHOR]

The developments of connected vehicles are heavily influenced by information and communications technologies, which have fueled a plethora of innovations in various areas, including networking, caching, and computing. Nevertheless, these important enabling technologies have traditionally been studied separately in the existing works on vehicular networks. In this paper, we propose an integrated framework that can enable dynamic orchestration of networking, caching, and computing resources to improve the performance of next generation vehicular networks. We formulate the resource allocation strategy in this framework as a joint optimization problem, where the gains of not only networking but also caching and computing are taken into consideration in the proposed framework. The complexity of the system is very high when we jointly consider these three technologies. Therefore, we propose a novel deep reinforcement learning approach in this paper. Simulation results with different system parameters are presented to show the effectiveness of the proposed scheme. [ABSTRACT FROM PUBLISHER]

In this paper, the tradeoff between energy efficiency and spectral efficiency in multicell heterogeneous networks is investigated. Our objective is to maximize both energy efficiency and spectral efficiency of the network, while satisfying the minimum rate requirements of the users. We define our objective function as the weighted summation of energy efficiency and spectral efficiency functions. The fractional frequency reuse (FFR) scheme is employed to suppress intercell interference. We formulate the problem as cell-center boundary selection for FFR, frequency assignment to users, and power allocation. The optimal solution of this problem requires exhaustive search over all cell-center radii, frequency assignments, and power levels. We propose a three-stage algorithm and apply it consecutively until convergence. First, we select the cell-center radius for the FFR method. Second, we assign the frequency resources to users to satisfy their rate requirements and also maximize the objective function. Third, we solve the power allocation subproblem by using the Levenberg–Marquardt method. Minimum rate requirements of users are also included in the solution by using dual decomposition techniques. Our numerical results show a Pareto-optimal solution for energy efficiency and spectral efficiency. We present energy efficiency, spectral efficiency, outage probability, and average transmit power results for different minimum rate constraints. Among other results, we show that, in a particular setting, \text13\% energy efficiency increase can be obtained in a multicell heterogeneous wireless network by sacrificing \text7\% spectral efficiency. [ABSTRACT FROM PUBLISHER]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM PUBLISHER]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM PUBLISHER]

This article studies the transmit beamforming security in the dual-functional radar-communication (DFRC) system, where the radar beam also serves as the artificial jamming to suppress potential eavesdropper channels. Unlike previous researches, which assumed that the lone target might be a potential eavesdropper on the adversary side, this paper analyses a more generic scenario in which the eavesdroppers’ channel state information (CSI) is unknown. The eavesdropping rate should be limited to guarantee transmission confidentiality, which is intractable owing to the unknown CSI. To address this issue, we present the long-term eavesdropping signal-to-interference-plus-noise ratio (SINR) as a more tractable security metric. Based on the long-term eavesdropping SINR, the sum rate maximization (SRM) and jamming power maximization (JPM) transmission scheme are investigated. For the SRM scheme, we propose a zero-forcing (ZF) suboptimal algorithm to solve the non-convex fractional programming (FP) problem, and for the JPM scheme, the resultant problem is solved via the semidefinite relaxation (SDR) technique. Finally, numerical results validate the effectiveness of the proposed beamforming approaches. [ABSTRACT FROM AUTHOR]

The internet of vehicles needs mobile communication systems for efficient communications. On the physical downlink control channel (PDCCH) of 5G, blind detection is performed to identify the downlink control information (DCI). Due to the uncertainty of DCI formats and PDCCH formats, the existing two-stage blind detection schemes separately decode every PDCCH code block under different DCI formats, leading to a high decoding complexity in the first stage. To reduce the detection complexity, this paper proposes an efficient DCI detection method, where a significance-test strategy is designed to detect the DCI formats. The significance-test strategy can forecast the DCI lengths without separately decoding the whole codeword, thus reducing the decoding complexity by several times. Moreover, the accuracy of the DCI detection is analyzed, with which the test scope of the test statistic is optimized for minimizing the decoding complexity on condition of meeting the detection accuracy requirements. Simulation results show that the proposed method significantly reduces the decoding complexity relatively to the existing two-stage detection schemes. [ABSTRACT FROM AUTHOR]

IEEE 802.11p vehicle-to-vehicle and vehicle-to-infrastructure communication technology is currently an emerging research topic in both industry and academia. Respective spectrum allocation of 10-MHz channels in the 5.9-GHz band in the United States and Europe allows considering intervehicle transmission of live-video information as a basis, which enables a new class of safety and infotainment automotive applications such as road video surveillance. This paper is first of its kind where such a video transmission system is developed and experimentally validated. We propose a low-complexity unequal packet loss protection and rate control algorithms for scalable video coding based on the 3-D discrete wavelet transform. We show that in comparison with a scalable extension of the H.264/AVC standard, the new codec is less sensitive to packet losses, has less computational complexity, and provides comparable performance in case of unequal packet loss protection. It is specially designed to cope with severe channel fading typical for dynamic vehicular environments and has low complexity, making it a feasible solution for real-time automotive surveillance applications. Extensive measurements obtained in realistic city traffic scenarios demonstrate that good visual quality and continuous playback is possible when the moving vehicle is in the radius of 600 m from the roadside unit. [ABSTRACT FROM PUBLISHER]

This paper addresses the problem of energy-aware multihop cooperation among the mobile terminals (MTs) that cooperatively download a common content from a wireless network. The base station (BS) unicasts or multicasts the content to selected MTs that, in turn, either unicast or multicast it to other MTs, forming a multihop ad hoc network with a predefined maximum allowed number of hops. This paper presents the optimization formulations whose solution gives the exact optimal set of receiving MTs from the BS, the optimal multihop ad hoc network, and the optimal unicasting and multicasting transmission bit rates that minimize the total energy consumption of the MTs. Second, a simplified multicasting formulation is proposed that has a close-to-optimal performance with notably lower computational complexity. Third, interference avoidance among the transmitting MTs is considered. For each presented formulation, the complexity is identified, and results show that some formulations can be efficiently solved for medium network sizes, while others are more computationally complex. Thus, polynomial-time heuristic solutions are presented that have close-to-optimal performance. Results demonstrate remarkable energy consumption reduction gains and wireless resources savings under various network scenarios. [ABSTRACT FROM PUBLISHER]

Travelers in vehicles often have a strong willingness to share their travel experience and exchange information to each other through social networks, such as Facebook and Twitter. This, however, can be costly due to the limited connections on the road to the Internet. In this paper, we develop Verse to facilitate the social communications among vehicle travelers on highways. Verse enables passengers onboard vehicles to share the content information, such as travel blogs with pictures, among each other using impromptu wireless intervehicle communications. Unlike traditional online social networks, which are built upon reliable internet protocol (IP) networks, vehicular social networks face fundamental challenges in that 1) users are anonymous and strangers to each other and that it is hard to identify potential friends of shared interests and that 2) users communicate through intermittent and unreliable intervehicle connections. On addressing the two challenges, Verse implements a friend recommendation function, which helps passengers efficiently identify potential social friends with both shared interests and relatively reliable wireless connections. In addition, Verse is equipped with a social-aware rate control scheme toward efficient utilization of network bandwidth. Using extensive simulations, we show that the friend recommendation function of Verse can effectively predict the mobility of vehicles to assist in social communication and that the social-aware rate control scheme quickly and efficiently adapts to the vehicle's transmission rate according to their social impact. [ABSTRACT FROM PUBLISHER]

Ultra-dense networking (UDN) is a promising technology to improve the network capacity in the next-generation mobile communication system. The virtualization paradigm is tightly integrated into UDN to address the problem of interference management. However, mobility management based on virtual cells meets significant challenges in UDN due to the frequent handovers and massive signaling overhead. These problems become severe for vehicles owing to their high-speed movement. In this paper, driven by trajectory prediction using a real-world vehicle mobility dataset, we propose a proactive mobility management solution based on virtual cells. Four modules are designed in the centralized Software-Defined Networking controller to support the proposed solution. The proposed LSTM-DR framework predicts the next locations of vehicles by integrating Long Short-Term Memory (LSTM) networks and Dead Reckoning (DR) method. The active gNBs selection algorithm selects the serving gNBs to form virtual cells according to predicted locations and mobility preferences. The corresponding signaling procedure is then carefully designed to further reduce the signaling overhead. Simulation results show that the proposed prediction framework can achieve higher accuracy and robustness in trajectory prediction. The proposed proactive solution reduces the handover frequency and handover failure rate and thereby saves the handover signaling overhead significantly. [ABSTRACT FROM AUTHOR]

In intelligent transportation systems (ITSs), the communication between the base station (BS) and the vehicles can form a virtual multiple-input multiple-out put (VMIMO) vehicle communication system. This paper addresses the issue of channel estimation in a virtual MIMO system that simultaneously adopt a smart antenna (SA). First, based on quaternion theory, a novel algorithm named quaternion noncircular MUSIC (QNC-MUSIC) is proposed, and direction of arrival (DOA) estimation is achieved for circular and noncircular signals. Then, a dimension reduction procedure is performed for the parameter search by employing the partial derivative of the spectrum function with respect to the noncircular phase; thus, a novel dimensional reduction noncircular MUSIC (DRNC-MUSIC) algorithm with a low computational complexity is proposed for DOA and polarization estimation of circular signals and noncircular signals. Finally, numerical examples are provided to demonstrate the parameter estimation performance of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Identifies and corrects the critical error made by D. Hong and S.S. Rappaport in their study `Teletraffic Model and Performance Analysis for Cellular Mobile Radio Telephone Systems with Prioritized and Nonprioritized Handoff Procedures.' Discussion of the effects of the correction on the related results mention in Hong and Rappaport's study.

Hybrid networks constructed from cellular networks and delay- and disruption-tolerant networks (DTNs) are able to provide reliable communications to mobile nodes in base-station-starved areas regardless of node mobility or density. However, no routing scheme in DTNs has considered the adaptation to other networks, i.e., cellular networks. Thus, the reliability of message delivery is dependent on the position relationship between source nodes and base stations. In this paper, we propose an advanced routing scheme that controls the maximum number of replicas according to the distance between the source node and the nearest base station. Furthermore, we show how to decide the maximum number of replica messages for the distance from the base stations by analyzing the message delivery reliability of an existing DTN routing scheme. Additionally, we execute extensive computer simulations to evaluate the performance of our proposed routing scheme. Our results show that our proposed routing scheme keeps the required reliability regardless of the source node location. [ABSTRACT FROM PUBLISHER]