Search

As the number of antennas increases, the massive multiple-input multiple-output (MIMO) system can precisely point to user equipments (UEs) with narrow beams. Accurate and timely channel state information (CSI) feedback is crucial to keep UEs in service. Mobile UEs, however, may suffer from the narrow beam nature of the massive MIMO system since UEs can move out of the beam coverage. When intelligent reflecting surface (IRS) is applied to the massive MIMO system, the adjustment of the IRS cannot be frequent as the IRS is controlled remotely by the base station (BS). Limiting the number of CSI feedback and the number of both BS and IRS adjustments significantly reduces the overhead of transmission and computation to the system. In this paper, we consider the UEs’ mobility adaptation problem in an IRS assisted multiuser massive MIMO downlink system with infrequent CSI feedback. We propose a beam control method that adapts to UEs’ mobility. The problem is constructed as a sum rate problem where both the BS and IRS are taken into account to jointly optimize the beamforming matrices. Simulation results show that our proposed algorithm can converge quickly and provide satisfactory performance for mobile UEs. At the same time, our proposed algorithm reduces the frequency of updating the beamforming matrices effectively both at the BS and at the IRS. [ABSTRACT FROM AUTHOR]

Multicell coordinated beamforming (CB) can mitigate intercell interference (ICI). However, existing work on CB focuses on systems that maximize overall throughput. This paper considers CB for systems with multiple receive antennas and further extends the CB to multiuser and multistream transmission. We consider fairness and pay close attention to cell-edge users. CB that maximizes the harmonic sum of signal-to-interference-plus-noise ratio (SINR) can be derived into a low-complexity algorithm that favors cell-edge users. Two iterative algorithms are developed. From the simulation results, the proposed algorithms can provide a better fifth-percentile user throughput compared with the CB algorithms minimizing mean square error, maximizing uplink SINR, and maximizing weighted sum rate. Furthermore, the computational complexity of the proposed algorithms is significantly lower than that maximizing the minimum SINR of users. [ABSTRACT FROM AUTHOR]

We investigate the performance of multiuser multiple-input-single-output (MU-MISO) downlink in the presence of the mutual coupling effect at the transmitter. Contrary to traditional approaches that aim at eliminating this effect, in this paper we propose a joint analog–digital (AD) beamforming scheme that exploits this effect to further improve the system performance. A jointly optimal AD beamformer is first obtained by iteratively maximizing the minimum received signal-to-interference-plus-noise ratio in the digital domain, followed by an optimization on the load impedance of each antenna element in the analog domain. We further introduce a decoupled low-complexity approach, with which existing closed-form beamforming schemes can also be efficiently applied. For the consideration of hardware imperfections in practice, we study the case where the analog load values are quantized, and propose a sequential search scheme based on greedy algorithm to efficiently obtain the desired quantized load values. Moreover, we also investigate the imperfect channel state information (CSI) scenarios, where we prove the optimality for closed-form beamformers, and further propose the robust schemes for two typical CSI error models. Simulation results show that with the proposed schemes the mutual coupling effect can be exploited to further improve the performance for both perfect CSI and imperfect CSI. [ABSTRACT FROM PUBLISHER]

In this paper, the problem of mode switching in multiple-input–multiple-output (MIMO) broadcast channels utilizing the Per-User Unitary Rate Control (PU2RC) transmission scheme is considered. Since there is no mathematical expression for the achievable rate of the PU2RC systems, it is proposed to approximate them using proper bounds. It is shown that certain simple feedback distributions will lead to tight bounds on the achievable rates of the PU2RC systems. The proposed bounds are used for the calculation of mode-switching points and maximization of the system rate under different multiplexing order conditions. The asymptotic behavior of the preferred modes is also studied under high-signal-to-noise-ratio (SNR) and low-SNR conditions, and it is shown that the single-user transmission mode is the preferred mode for both regimes. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate a novel relaying technique employing scheduling, precoding, beamforming, and power allocation for a multiuser multiple-input–multiple-output (MU-MIMO) relay network. In the proposed scheme, the interference is canceled by using a combination of transmit–receive weights and Tomlinson–Harashima precoding (THP). To achieve data rate fairness among different users and further improve the performance of MU-MIMO relay networks, we propose a low-complexity power allocation (LC-PA) to allocate power to each user. In addition, an algorithm to select a subset of users that has maximum sum rate performance is proposed. The performance of the proposed scheme is investigated by examining the sum rate of the system for different user selection algorithms and different power allocation schemes. [ABSTRACT FROM PUBLISHER]

In this paper, we consider unicast/multicast multicell cooperative transmission with interference among users/user groups. In this context, we derive the optimal minimum variance distortionless response (MVDR)-based successive minimum variance beamforming (SMVB) scheme that achieves a superior sum-rate performance compared with the block diagonalization scheme. Subsequently, we derive an optimal joint power allocation and broadcast beamforming scheme for multicell cooperative broadcast transmission for a pooled power constraint at the base stations. This scheme is extended to include per base station power constraints by formulating it as a relaxed semi-definite program (SDP). We also consider the multicell cooperative uplink scenario and derive a successive multiuser (MU) uplink beamforming (SMUB) scheme that maximizes the signal-to-interference-plus-noise ratio (SINR) of each user. Next, we consider imperfect channel state information (CSI) and derive a robust beamforming scheme for the downlink, based on minimizing the worst-case interference by formulating it as a second-order cone program. It is demonstrated that the corresponding robust beamformer for the uplink transmission can be derived by employing the multidimensional covariance fitting approach. Simulation results are presented to demonstrate the superior sum-rate performance of the proposed multicell transmission schemes. The performance is also compared with several bounds for cooperative multicell scenarios. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of coordinated beamforming across a group of base stations (BSs) and frequency slots in the downlink of a multiple-input multiple-output (MIMO) orthogonal frequency-division multiple-access (OFDMA) cellular network. Three figures of merit are considered for system design under a per-BS power constraint: 1) the weighted sum of the rates (WSR) on the frequency slots of the coordinated BSs; 2) the global energy efficiency (GEE), defined as the ratio between the network sum rate and the corresponding consumed power; and 3) the weighted sum of the energy efficiencies (WSEE) on the frequency slots of the coordinated BSs. The Karush–Kuhn–Tucker (KKT) conditions of the considered optimization problems are first derived to gain insight into the structure of the optimal beamformers. Then, we propose a suboptimal design method that can be applied to all considered figures of merit. Numerical results are provided to assess the performance of the proposed beamforming strategies. [ABSTRACT FROM PUBLISHER]

Two-stage beamforming is a transmit strategy that uses two types of beamformers to reduce the feedback overhead of frequency-division-duplexing massive multiple-input multiple-output systems that are spatially correlated. In this paper, we present large system analysis of two-stage beamforming when a transmitter has limited channel information from feedback and when regularized-zero-forcing (RZF) is used as a second-stage beamformer. We consider two random-vector-quantization-based feedback schemes that can be respectively applied when users have perfect channel information or perfect effective channel information. For each feedback method, we analyze both expected signal-to-interference-plus-noise ratio (SINR) and expected rate loss and then characterize their bounds as a function of the number of feedback bits. From the characterization, we reveal that the sum rate of two-stage beamforming is very sensitive to the regularization parameter of RZF, especially when the number of feedback bits is limited. Motivated by this, we derive the optimal regularization parameter that maximizes the SINR of two-stage beamforming with limited feedback. Using simulations, we verify the tightness of the characterized bounds and quantify how the use of the optimal regularization parameter improves the sum rate of two-stage beamforming. [ABSTRACT FROM AUTHOR]

In this paper, we propose a practical downlink multiuser multiple-input–multiple-output (MU-MIMO) system. The proposed MU-MIMO system focuses on improving two limiting factors for practical implementations of MU-MIMO: 1) feedback rate and 2) computational complexity. First, users efficiently feed their channel-state information back with low feedback rate based on the proposed channel-quantization method. Second, the beamforming matrix at the base station is easily computed using singular value decomposition (SVD). Numerical results show that the proposed MU-MIMO system achieves a higher sum rate than conventional MU-MIMO systems, particularly at low feedback rate, while the computational complexity is kept reasonable. [ABSTRACT FROM PUBLISHER]

In this paper, we propose a distributed beamforming scheme to realize a full-duplex relay (FDR) in multiuser multiple-input–multiple-output (MIMO) relaying systems. In the proposed scheme, each mobile and relay station performs distributed transmit beamforming and receive combining, whereas the base station performs ordinary multiuser MIMO transmission. Using the channel reciprocity, the proposed FDR scheme can be realized in an iterative way with no cooperation among nodes. Numerical results show that the proposed scheme provides substantial performance improvement compared with the half-duplex relay. [ABSTRACT FROM PUBLISHER]

A precoding scheme is proposed for the downlink of multibeam satellite communication in the face of phase perturbations. In order to alleviate the signal-to-interference and noise ratio degradation induced by phase uncertainty and to minimize the transmission power consumption, we formulated the beamforming problem as a chance-constrained optimization. Moreover, we provided a large deviation inequality aided conservative approximation for the chance-constraints, followed by conceiving a tractable solution. Our simulation results showed the accuracy and the efficiency of our proposed approximation algorithm compared to the benchmarks. [ABSTRACT FROM AUTHOR]

Dual-functional radar-communication (DFRC) has been viewed as a promising component in future networks. The considered two-cell interfering DFRC network involves two multi-antenna base stations (BSs), and each BS serves multiple single-antenna users and receives echo signals to detect the target. An optimization framework for the joint transmit beamforming and receive filters design of a coordinated two-cell network is formulated. Specifically, we minimize the transmit power at two BSs subject to the signal-to-interference-and-noise ratio constraints. To solve the formulated non-convex optimization problem, an alternating optimization-based method is invoked. For the transmit beamforming design, a locally optimal successive inner convex approximation (SICA)-based method with fast convergence is firstly proposed. To further reduce the computational complexity, we also provide three zero-forcing (ZF)-based sub-optimal methods for practical consideration. For the receive filters design, a power iterations-based method is proposed. Simulation results validate the effectiveness of our proposed SICA-based locally optimal and ZF-based sub-optimal schemes. [ABSTRACT FROM AUTHOR]

To achieve the full multiplexing gain of a $K$-multiuser multiple-input–multiple-output (MIMO) overlay cognitive radio (CR) network, a distributed opportunistic interference alignment (DOIA) technique using a new beamforming algorithm, namely, threshold-based beamforming (TBF), is proposed. The MIMO overlay CR system consists of one primary user (PU) and $K$ secondary users (SUs) where the local channel state information is available at both the transmitters and receivers of SUs. Assuming that the receiver and the transmitter of the PU have perfect knowledge of their own channel matrix, the PU uses a maximum eigenmode beamforming (MEB) scheme for its data transmission to release some of its eigenmodes for the SUs. For this virtual cooperation, the SUs align their transmitted signals to the spatial directions (SDs) associated with the unused PU's eigenmodes to ensure orthogonality between the links of the PU and the SUs. In addition, the MEB scheme overcomes the limitation of the conventional water-filling power allocation (WPA) in releasing the PU's eigenmodes for the SUs at high signal-to-noise ratios (SNRs). A noniterative and distributed power-allocation strategy, namely, TBF, is proposed, in which the SUs' links with a maximum eigenvalue above a certain threshold transmit data at full power, and the rest remain silent. This protocol, along with the MEB scheme, enables the MIMO overlay CR system to enhance the throughput of the network described as the average sum rate of both the PU and SUs. The proposed DOIA-TBF protocol allows the opportunistic SUs to use the same frequency band of a preexisting PU and guarantees that no interference is imposed on the PU's performance for such a MIMO overlay CR system. [ABSTRACT FROM PUBLISHER]

We consider a multiple-input–multiple-output (MIMO) relaying broadcast channel in downlink cellular networks, where the base station and the relay stations are both equipped with multiple antennas, and each user terminal has only a single antenna. In practical scenarios, channel estimation is imperfect at the receivers. Aiming to maximize the signal-to-interference noise ratio (SINR), at each user, we develop two robust linear beamforming schemes for the single-relay case and the multirelay case, respectively. The two proposed schemes are based on singular value decomposition (SVD), minimum mean square error (MMSE), and regularized zero forcing (RZF). Simulation results show that the proposed scheme outperforms the conventional schemes with imperfect channel estimation. [ABSTRACT FROM PUBLISHER]