Search

Physical layer security has drawn significant attention in recent years because of its advancement in preventing confidential information leakage to eavesdroppers. In this paper, we focus on secure beamformer designs in multiuser multi-input multi-output (MU-MIMO) systems with a multi-antenna eavesdropper attempting to overhear the confidential information of a particular user. Unlike the existing work, we aim to exploit the inherent multi-user interference to disrupt the reception of the eavesdropper and enhance the security of wireless communications. Particularly, utilizing practical signal-to-interference-noise metrics, the objective of the secure beamformer design is to minimize the eavesdropper's SINR, while providing legitimate users with required prespecified SINRs to guarantee the qualify of service. We propose secure beamformer designs for both downlink and uplink transmissions, under the conditions of known and unknown eavesdropper's channels, respectively. With the proposed secure beamformers, the multiuser signal behaves like the artificial noise or distributed friendly jamming, which can further degrade the reception of the eavesdropper. Extensive simulation studies confirm our analytical performance predictions and illustrate the advantages of proposed beamformer designs for secure MU-MIMO transmissions. [ABSTRACT FROM AUTHOR]

In this paper, the problem of mode switching in multiple-input–multiple-output (MIMO) broadcast channels utilizing the Per-User Unitary Rate Control (PU2RC) transmission scheme is considered. Since there is no mathematical expression for the achievable rate of the PU2RC systems, it is proposed to approximate them using proper bounds. It is shown that certain simple feedback distributions will lead to tight bounds on the achievable rates of the PU2RC systems. The proposed bounds are used for the calculation of mode-switching points and maximization of the system rate under different multiplexing order conditions. The asymptotic behavior of the preferred modes is also studied under high-signal-to-noise-ratio (SNR) and low-SNR conditions, and it is shown that the single-user transmission mode is the preferred mode for both regimes. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate a novel relaying technique employing scheduling, precoding, beamforming, and power allocation for a multiuser multiple-input–multiple-output (MU-MIMO) relay network. In the proposed scheme, the interference is canceled by using a combination of transmit–receive weights and Tomlinson–Harashima precoding (THP). To achieve data rate fairness among different users and further improve the performance of MU-MIMO relay networks, we propose a low-complexity power allocation (LC-PA) to allocate power to each user. In addition, an algorithm to select a subset of users that has maximum sum rate performance is proposed. The performance of the proposed scheme is investigated by examining the sum rate of the system for different user selection algorithms and different power allocation schemes. [ABSTRACT FROM PUBLISHER]

Millimeter wave (mmWave) has been widely considered as a promising technology in the next generation wireless communication systems. Various beam-based directional transmission techniques have been proposed to compensate high pathloss caused by mmWave properties. However, mobility effect of users potentially causes severe inter-beam interferences, which has not been fully-investigated in existing studies. In this paper, we have analyzed different types of mobility-aware beam interference models. Additionally, the theoretical SINR is derived based on channel statistics and the trajectories of users. We propose a mobility-aware subband and beam resource allocation (MSBA) scheme for the mmWave subband-beam massive multi-input multi-output (SB-MMIMO) systems. The proposed MSBA benefits from reduced computation complexity for maximizing system throughput constrained by quality-of-service (QoS) demands of users. The first phase of MSBA scheme is responsible for resource block assignment; while the second phase allocates beamwidth and beam directions according to the analytical derivations. Numerical results show that the proposed MSBA scheme can effectively achieve the highest system throughput and the lowest complexity compared to existing schemes in open literatures. [ABSTRACT FROM AUTHOR]

Massive multiple-input–multiple-output (MIMO) antenna system implies the use of a large number of base station (BS) antennas to serve a relatively small number of user terminals (UTs) for extraordinary spectral efficiency. However, its performance is limited by pilot contamination due to unavoidable reuse of pilot sequences from UTs in different cells. In this paper, we analyze the performance of massive MIMO zero-forcing (ZF) systems using the time-shifted pilot scheme, which was known to combat pilot contamination effectively using conjugate beamforming if there is a very large number of antennas. We derive expressions for achievable sum rates and the signal-to-interference-plus-noise ratios (SINRs) of forward and reverse links if the number of BS antennas is finite. Then, the impact of system parameters, such as cell radius, transmit power, group number (a parameter related to the time-shifted pilot scheme), BS antenna number, etc., on the system performance are revealed. Our model embraces a series of previous works as special cases. Moreover, we compare the performance of conjugate and ZF precoders, from which a simple but effective large-scale fading-based UT scheduling scheme is proposed to enhance the system throughput. [ABSTRACT FROM PUBLISHER]

This paper addresses the problem of coordinated beamforming across a group of base stations (BSs) and frequency slots in the downlink of a multiple-input multiple-output (MIMO) orthogonal frequency-division multiple-access (OFDMA) cellular network. Three figures of merit are considered for system design under a per-BS power constraint: 1) the weighted sum of the rates (WSR) on the frequency slots of the coordinated BSs; 2) the global energy efficiency (GEE), defined as the ratio between the network sum rate and the corresponding consumed power; and 3) the weighted sum of the energy efficiencies (WSEE) on the frequency slots of the coordinated BSs. The Karush–Kuhn–Tucker (KKT) conditions of the considered optimization problems are first derived to gain insight into the structure of the optimal beamformers. Then, we propose a suboptimal design method that can be applied to all considered figures of merit. Numerical results are provided to assess the performance of the proposed beamforming strategies. [ABSTRACT FROM PUBLISHER]

This paper is concerned with the performance analysis of the maximum eigenmode beamforming (MEB) scheme with equal power allocation (EPA) over practically coded multiple-input multiple-output (MIMO) multiple-access channels (MACs). Both the scenarios of perfect and imperfect channel state information (CSI) at the transmitters (CSIT) are considered. Analytical and numerical results show that MEB with EPA can achieve significant power savings and is less sensitive to CSIT error than other alternatives. [ABSTRACT FROM PUBLISHER]

In this paper, we propose a distributed beamforming scheme to realize a full-duplex relay (FDR) in multiuser multiple-input–multiple-output (MIMO) relaying systems. In the proposed scheme, each mobile and relay station performs distributed transmit beamforming and receive combining, whereas the base station performs ordinary multiuser MIMO transmission. Using the channel reciprocity, the proposed FDR scheme can be realized in an iterative way with no cooperation among nodes. Numerical results show that the proposed scheme provides substantial performance improvement compared with the half-duplex relay. [ABSTRACT FROM PUBLISHER]

We consider a multiple-input–multiple-output (MIMO) relaying broadcast channel in downlink cellular networks, where the base station and the relay stations are both equipped with multiple antennas, and each user terminal has only a single antenna. In practical scenarios, channel estimation is imperfect at the receivers. Aiming to maximize the signal-to-interference noise ratio (SINR), at each user, we develop two robust linear beamforming schemes for the single-relay case and the multirelay case, respectively. The two proposed schemes are based on singular value decomposition (SVD), minimum mean square error (MMSE), and regularized zero forcing (RZF). Simulation results show that the proposed scheme outperforms the conventional schemes with imperfect channel estimation. [ABSTRACT FROM PUBLISHER]