Search

This work studies the influence of substrate loss on the performance of acoustic resonators and on-chip inductors and investigates the effective substrate resistivity of seven commonly used substrates in silicon-based devices. The substrates include X-cut lithium niobate (LiNbO3) film with two different thicknesses (400 nm and 1.6 $\mu \text{m}$) on high-resistivity Si (HR-Si) and amorphous Si wafers, SiO2 film with two different thicknesses on HR-Si, and bare HR-Si. The effective resistivities of these substrates are extracted using coplanar waveguides (CPWs) over a frequency range from 1 to 40 GHz. Using the effective resistivity approach, the efficiency of two substrate loss reduction techniques—Si wafer removal and amorphous Si—in reducing substrate loss is quantified. Comparison of the extracted substrate resistivities of the suspended and un-suspended dielectric-on-Si structures and comparison of LiNbO3 on HR-Si and amorphous Si are carried out. Substrate loss reduction techniques are more advantageous for a thinner dielectric film and at a lower frequency range due to the higher filling factor of the electric field in the Si wafer. Finally, by comparison of the effective substrate resistivity of SiO2 film on an HR-Si with bare HR-Si, thick plasma-enhanced chemical vapor deposition (PECVD) SiO2 film is found to be a good insulation layer to reduce substrate loss. [ABSTRACT FROM AUTHOR]

This article presents the design approach and the first demonstration of a wideband hybrid monolithic acoustic filter in the K-band, which exceeds the limitation of electromechanical coupling on the fractional bandwidth (FBW) of acoustic filters. The hybrid filter utilizes the codesign of electromagnetic (EM) and acoustic to attain wide bandwidth while keeping the advantages of small sizes and high Q in the acoustic domain. The performance trade space and design flow of the hybrid filter are also presented in this article, which allows this technology to be applied for filters with different center frequencies and FBWs. The hybrid filter is simulated by hybridizing the EM and acoustic finite element analysis, which are carried out separately and combined at a system level. The fabricated filter built with resonators having an electromechanical coupling of 0.7% based on the seventh-order antisymmetric Lamb wave mode (A7) has a 3-dB FBW of 2.4% at 19 GHz and a compact footprint of 1.4 mm2. [ABSTRACT FROM AUTHOR]

This work presents an improved design that exploits dispersion matching to suppress the spurious modes in the lithium niobate first-order antisymmetric (A1) Lamb wave mode resonators. The dispersion matching in this work is achieved by micro-machining the lithium niobate thin film to balance the electrical and mechanical loadings of electrodes. In this article, the dispersion matchings of the A1 mode in lithium niobate based on different metals are analytically modeled and validated with finite-element analysis. The fabricated devices exhibit spurious-free responses with a quality factor of 692 and an electromechanical coupling coefficient of 28%. The demonstrated method herein could overcome a significant hurdle that is currently impeding the commercialization of A1 devices. [ABSTRACT FROM AUTHOR]

This paper reports the first demonstration of phononic crystals (PnCs) in suspended lithium niobate thin films, which exhibit band gaps for tailoring the performance of laterally vibrating devices. Transmission and reflection properties of lithium niobate PnCs for both shear-horizontal (SH0) and length-extensional (S0) modes have been investigated and subsequently explored in two applications. In the first case, PnC-embedded delay lines were designed for filtering with stopbands, while in the second case, PnC-bounded resonators were implemented for spurious mode suppression. Equivalent circuit models incorporating acoustic scattering parameters of the designed PnCs and Mason’s model of the transducers have been built for each application. Benchmarked to reference devices without PnCs, the measured PnCs embedded in delay lines show 20-dB attenuation in the stopbands and less than 2-dB loss in the passbands for the SH0 mode, and 30-dB attenuation in the stopbands and less than 10-dB loss in the passbands for the S0 mode. The fabricated piezoelectric PnC-bounded resonator has shown a quality factor of 434 at 142.7 MHz with undesired spurious modes significantly suppressed. These demonstrations show that lithium niobate PnCs for laterally vibrating devices can potentially lead to wideband and low-loss acoustic functions for radio frequency signal processing. [ABSTRACT FROM AUTHOR]