Search

A key problem in robot grasping is that of positioning the manipulator contacts so that an object can be grasped. In unstructured environments, contact positions are typically planned based on range or visual measurements that are used to reconstruct object geometry. However, because it is difficult to measure the complete object geometry precisely in common grasp scenarios, it is useful to employ additional techniques to adjust or refine the grasp using local information only. In particular, grasp control techniques can be used to improve a grasp by adjusting the contact configuration after making initial contact with an object by using measurements of local object geometry at the contacts. This paper proposes three variations on null-space grasp control: an approach that combines multiple grasp objectives to improve a grasp. Two of these variations are theoretically demonstrated to converge to force-closure configurations for arbitrary convex objects when grasping with two contacts. All variations are found to converge in simulation. Robot-grasping experiments are reported that show the approach to be useful in practice. [ABSTRACT FROM AUTHOR]

One important category of parallel mechanisms is the translational parallel mechanism (TPM). This paper focuses on the structural shakiness of the nonoverconstrained TPM. Such a structural shakiness is due to the unavoidable lack of rigidity of the real bodies, which leads to uncheckable orientation changes of the moving platform of a TPM. Using algebraic properties of displacement subsets and, especially, displacement Lie subgroup theory, we show that the structural shakiness of the nonoverconstrained TPM is inherently determined by the structural type of its limb chains. A structural shakiness index (SSI) for a nonoverconstrained TPM is introduced. When the set of feasible displacements of the end body of a 5-degree-of-freedom (DOFs) limb chain contains two infinities of parallel axes of rotation, we have SSI = 2; when the displacement set of the end body of a 5-DOF limb chain contains only one infinity of parallel axes of rotation, we have SSI = 1. It is proven that nonoverconstained TPMs constructed with limb chains with SSI = 1 are much less prone to orientation changes than those constructed with limb chains with SSI = 2. Based on the SSI, we enumerate limb kinematic chains and construct 21 nonoverconstrained TPMs with less shakiness. [ABSTRACT FROM AUTHOR]

The admittance of a manipulator can be used to improve robotic assembly. If properly selected, the admittance will regulate a contact force and use it to guide the parts to proper positioning. In previous work, procedures for selecting the appropriate admittance for single principal contact (PC) cases were identified. This paper extends this research for some of the two PC cases—those for which each contact occurs at a single point. The conditions obtained ensure that the motion that results from frictionless contact always instantaneously reduces part misalignment. We show that, for bounded misalignments, if an admittance satisfies the misalignment. reducing conditions at a finite number of contact configurations, then the admittance will also satisfy the conditions at all intermediate configurations. [ABSTRACT FROM AUTHOR]

Force feedback is necessary for accurate force control in robotic manipulators, and thus far, wrist force/torque (F/T) sensors have been used. But an important problem arises when only these types of sensors are used. In a dynamic situation where the manipulator moves in either free or constrained space, the interaction forces and moments at the contact point and also the noncontact ones are measured by the mentioned sensor. In this paper, an estimator based on a sensor fusion strategy integrating the measurements of three different sensors (a wrist FIT sensor, an inertial sensor, and joint sensors) was developed to determine the contact force and torque exerted by the manipulator to its environment. The resulting observer helps to overcome some difficulties of uncertain world models and unknown environments since it reduces the high-frequency and low-frequency spectral contents, i.e., the low-frequency component due to inertia of a heavy tool mass and the high-frequency component due to impacts. The new improvement was experimentally validated in a force/position impedance control loop applied to a Stäubli RX60 industrial robotic platform. [ABSTRACT FROM AUTHOR]

This paper proposes a natural saturating extension of the proportional-derivative (PD) with desired gravity compensation (PDdgc) control law for the global regulation of robot manipulators with bounded inputs. Compared with other algorithms previously proposed under the same analytical framework, it proves to be advantageous in several senses. First, it involves a single saturation function at each joint. Second, it does not need to discriminate the terms that shall be bounded, since these are simply all of them included within the only saturation involved at every joint. Experimental results show the effectiveness of the proposed scheme. As far as the authors are aware, no such type of natural saturating extension (i.e., involving only one saturation function at each joint, where all the terms of the controller are embedded) to the bounded input case had been previously proposed for the PDdgc scheme. Furthermore, it is shown how the proposed approach may be conceived within the framework of the energy shaping plus damping injection methodology. [ABSTRACT FROM AUTHOR]

This paper describes a spatial-motion-constraints-generation approach for a human-machine collaborative surgical-assistant system from registered computer tomography models. We extend constrained optimization formulation incorporating task goals, anatomy-based constraints, ‘no fly zones’ etc. We use a fast potential-collision-constraint-detection method based on a 3-D surface model and covariance tree data structure. These boundary constraints, along with task behaviors and joint limits, serve as constraint conditions for constrained robot control. We are able to follow a complex path inside a human skull, phantom represented by a surface model composed of 99000 vertices and 182 000 triangles in real time. Our approach enables real-time task-based control of a surgical robot in a precise interactive minimally invasive surgery task. We illustrate our approach based on two example tasks which are analogous to the procedures in endoscopic sinus surgery, and analyze the user's performance on both teleoperation and cooperative control for one of the example tasks. The experimental results show that a robotic assistant employing our approach on spatial motion constraints can assist the user in skilled manipulation tasks, while maintaining desired properties. Our approach is equally applicable to teleoperative and cooperative controlled robots. [ABSTRACT FROM AUTHOR]

Classical sensor-based approaches tend to constrain all the degrees of freedom of a robot during the execution of a task. In this paper, a new solution is proposed. The key idea is to divide the global full-constraining task into several subtasks, which can be applied or inactivated to take into account potential constraints of the environment. Far from any constraint, the robot moves according to the full task. When it comes closer to a configuration to avoid, a higher level controller removes one or several subtasks, and activates them again when the constraint is avoided. The last controller ensures the convergence at the global level by introducing some look-ahead capabilities when a local minimum is reached. The robot accomplishes the global task by automatically sequencing sensor-based tasks, obstacle avoidance, and short deliberative phases. In this paper, a complete solution to implement this idea is proposed, along with several experiments that prove the validity of this approach. [ABSTRACT FROM AUTHOR]