Search

This paper proposes a novel data driven framework for detecting topology transitions in a distribution network. The framework analyzes data from phasor measurement units (PMUs) and relies on the fact that changes in network topology results in changes in the structure and admittance of the network. Using voltage and current phasors recorded by PMUs, the proposed method approximates network parameters using an ensemble-based deep learning model and thus, it does not require any knowledge of network parameters and load models. Using the prediction error of the proposed model, a connectivity matrix which shows the status of switches is constructed. In contrast to other methods, this proposed framework does not require a library of voltage and current transients associated with possible network transitions. It can also detect simultaneous switching actions and is robust to noise and load variations. The model yields a lower error detection rate, and its performance is validated using a modified version of the IEEE 33 bus network and a real feeder located in Queensland, Australia, under full and partial observability conditions. The proposed model has also been compared with another data driven method in terms of inference time and error detection rates. [ABSTRACT FROM AUTHOR]

Accurate solar photovoltaic (PV) generation forecast is critical to the reliable and economic operation of a modern power system. In practice, due to various faulty issues in the sensor, communication, or database system, the historical and online measurement data may not be always complete, and the missing data could dramatically degrade the forecasting model's accuracy. To solve this problem, this paper proposes an integrated missing-data tolerant model for probabilistic PV power generation forecasting. Taking historical PV generations as input, this model is based on a recursive long short-term memory network (Rec-LSTM), which can provide multi-step ahead forecasting of the probability distribution of PV generation. The unobserved input data will be imputed recursively based on the model output at the previous time step. During the training process, the imputations and forecasting values are iteratively updated by the negative log-likelihood loss function. As a salient advantage, this method can deal with data missing scenarios at both offline and online stages. Numerical experiments are conducted on two one-year datasets from Australia and Singapore, respectively. Probabilistic forecasting for both large-scale and small-scale building-level PV power generation is tested at the time resolution of 15 mins. Testing results show the proposed method can achieve superior probabilistic prediction accuracy as well as strong robustness under various data missing scenarios, compared to other state-of-the-art methods. [ABSTRACT FROM AUTHOR]

As rooftop solar PVs installed by residential customers penetrate in low voltage distribution network (LVDN), some issues, e.g. over/under voltage and unbalances, which may undermine the network's operational performance, need to be adequately addressed. To mitigate unbalances in LVDN, phase-switching devices (PSDs) and static var compensator (SVC) are two equipment that is cost-effective and efficient. However, most existing research on operating PSDs is based on inflexible heuristic algorithms or without considering the network formulation, which may lead to strategies that violate operational requirements. Moreover, few pieces of literature have been reported on mitigating unbalances in LVDN via SVC and PSDs together. This paper formulates the decision-making process as a mixed-integer non-convex programming (MINCP) problem after developing an SVC model for dispatch purpose. Compared with existing work, the proposed method aims at minimizing current unbalance based on their phasor values and takes the network's operational requirements into account. To efficiently solve the challenging problem, the MINCP is reformulated as a mixed-integer second order-cone programming (MISOCP) problem based on either exact reformulations or accurate approximations, making it possible to employ efficient off-the-shelf solvers. Simulations based on two modified IEEE systems and a practical Australian LVDN demonstrates the efficiency of the proposed method in mitigating unbalances in LVDN. [ABSTRACT FROM AUTHOR]

Synchronous generators are operating for less time than before or being decommissioned in the National Electricity Market (NEM) of Australia, due to the proliferation of asynchronous wind and solar generation. Sub-networks of the NEM will face inertia shortages in the near future. This paper develops a formulation of zonal inertia constrained generator dispatch for power systems with a diversified generator portfolio including synchronous generators, synchronous condensers, inverter-interfaced generators and energy storages. Zonal inertia constraints are formulated in unit commitment and optimal power flow to limit the rate of change of frequency (RoCoF) in the event of network separation. Load frequency relief is also considered to reduce the ramp rate requirement of primary reserve. The proposed formulation can reduce the average cost of primary reserve and maintain zonal inertia adequacy to constrain RoCoF in case of the trip of the interconnector(s). [ABSTRACT FROM AUTHOR]

Accurate and reliable low-voltage load forecasting is critical to optimal operation and control of distribution network and smart grid. However, compared to traditional regional load forecasting at high-voltage level, it faces tough challenges due to the inherent high uncertainty of the low-capacity load and distributed renewable energy integrated in the demand side. This paper proposes a novel hybrid ensemble deep learning (HEDL) approach for deterministic and probabilistic low-voltage load forecasting. The deep belief network (DBN) is applied to low-voltage load point prediction with the strong ability of approximating nonlinear mapping. A series of ensemble learning methods including bagging and boosting variants are introduced to improve the regression ability of DBN. In addition, the differencing transformation technique is utilized to ensure the stationarity of load time series for the application bagging and boosting methods. On the basis of the integrated thought of ensemble learning, a new hybrid ensemble algorithm is developed via integrating multiple separate ensemble methods. Considering the diversity in various ensemble algorithms, an effective K nearest neighbor classification method is utilized to adaptively determine the weights of sub-models. Furthermore, HEDL based probabilistic forecasting is proposed by taking advantage of the inherent resample idea in bagging and boosting. The effectiveness of the HEDL method for both deterministic and probabilistic forecasting has been systematically verified based on realistic load data from East China and Australia, indicating its promising prospective for practical applications in distribution networks. [ABSTRACT FROM AUTHOR]

Due to the rapid development of distributed renewable generation, an effective risk assessment and early warning mechanism for active distribution networks is of great significance to maintain the system reliability and enhance energy grid resilience. In this paper, a novel risk assessment model is proposed to assess the probability of potential disturbances to the grid and provide accurate advice for trading prosumers’ renewable energy. The model can compute node failure probability (FP) for transmission networks as well as the area FP for distribution networks, while combining the two perspectives by topology analysis. A weather threshold value is first derived to define the extreme weather condition. Then the FP of transmission lines is calculated by joint probability models under four instances of extreme climate. For distribution networks, the weather influence is obtained by applying the Rare Events Logistic Regression model initially. Then the equipment fault related to the geographical feature is captured using feeder taxonomy and hierarchical clustering. Furthermore, the accidental factor as a new parameter is introduced to evaluate the vandalism, vegetation, and operating fault to the grid. Finally, the warning information and advice for customers will be presented after fault chain analysis. The FP for a specific area in Australia is analyzed in case studies to verify the proposed model. [ABSTRACT FROM AUTHOR]

Market and network integration of distributed energy resources can be facilitated by their coordination within a virtual power plant (VPP). However, VPP operation subject to network limits and different market and physical uncertainties is a challenging task. This paper introduces a framework that co-optimizes the VPP provision of multiple market (e.g., energy, reserve), system (e.g., fast frequency response, inertia, upstream reactive power), and local network (e.g., voltage support) services with the aim of maximizing its revenue. To ensure problem tractability, while accommodating the uncertain nature of market prices, local demand, and renewable output and while operating within local network constraints, the framework is broken down into three sequentially coordinated optimization problems. Specifically, a scenario-based robust optimization for day-ahead resource scheduling, with linearized power flows, and two receding horizon optimizations for close-to-real-time dispatch, with a more accurate second-order cone relaxation of the power flows. The results from a real Australian case study demonstrate how the framework enables effective deployment of VPP flexibility to maximize its multi-service value stack, within an uncertain operating environment, and within technical limits. [ABSTRACT FROM AUTHOR]

This paper presents a multi-nodal intertemporal Cournot gaming model with transmission constraints and uses it to simulate energy-only and capacity-energy market designs in the presence of uncertainties stemming from intermittent renewable power generation. Both market paradigms are compared to a competitive benchmark in order to determine which one performs better in a concentrated market with significant penetration of wind and solar generation. As a specific example, the model is applied to the South Australian zone of the Australian National Electricity Market (NEM). The simulation results for the time interval 2013–2030 show that the capacity-energy market has the potential to induce significant new capacity and push prices much closer to the competitive level in contrast to the current energy-only market design. [ABSTRACT FROM AUTHOR]

This paper proposes a rule-based power management algorithm to enable the dispatch of a utility-scale PV power plant consisting of a hybrid energy storage system, in accordance with the Australian national electricity rules. This algorithm is purposely designed to regulate the instantaneous power of a PV plant with the same level of dispatchability as conventional power plants. Additionally, the proposed algorithm is robust under large forecasting errors (up to 60%) of solar irradiance and it can be easily implemented in practice. Specifically, this algorithm can be executed within seconds even when considering detailed market operation and model nonlinearities. A 30 MW PV plant, including a 7.5 MW/1.25 MWh vanadium redox battery and a 1.5 MW/0.25 MWh suppercapacitors bank, has been modeled using MATLAB/Simulink and PLECS software environment. The simulation results were based on various scenarios and confirmed the effectiveness of the proposed power management algorithm. It has been shown that even in the worst-case scenario of solar forecasting error of 60%, the proposed algorithm still managed to deliver over 94% of the available energy for a given solar irradiance profile of one month. [ABSTRACT FROM AUTHOR]

Due to the variability and partial unpredictability of renewable energy sources (RES), generation reserve sizing is key for managing operational risks and enhancing grid reliability. Most existing approaches for reserve sizing estimate the forecasting error for RES using either simple point forecasts, or probabilistic forecasts that assume a predefined parametric model of the underlying distribution, such as a Gaussian distribution. However, these approaches are unable to accurately model the probability of critical events that occur in the tails of the distributions, which is vital for operational risk management. Further, they do not account for multiple dynamic factors that may impact operational risk. In this paper, we introduce a data-driven dynamic probabilistic reserve sizing method based on the artificial intelligence technique of dynamic Bayesian belief networks. The method considers the actual underlying distribution of forecasting errors from the availability of conventional generators (forecasting errors of their available generation capacity), demand, RES, and prevailing conditions such as weather and market prices. In addition, we introduce a new dynamic metric for calculating the reliability level of the power grid in order to provide a real-time stochastic decision support tool for power system operators. The proposed method is demonstrated using seven years of real historical data with a granularity of 30 min from the power system in Australia, and has been implemented and is currently used by the Australian system operator. [ABSTRACT FROM AUTHOR]

It can be expected that the power systems of the future will be significantly different from today’s, especially due to increasing renewable energy sources (RESs), storage systems, and price-responsive users leading to large uncertainty and complexity. The operation of these future grids (FGs) at levels of renewable energy approaching 100% will require all the usual stability analysis along with new issues in a much more complex situation than has been encountered in the past. In fact, how close we can get to this desired level will likely be dependent on the assessed stability limits. Therefore, in this study, we use a novel scenario-sensitivity-contingency based framework to evaluate the system stability along possible evolution pathways towards high renewable FGs. As a case study, we carry out our studies based on proposed future scenarios and sensitivities for the Australian FG. Using a simulation platform that encompasses market simulation, load flow calculation and stability assessment altogether, the impact of grid strength, level of prosumers, and utility storage on the stability of the FG is studied and quantified indices for long term stability have been devised. The results of this study enable us to address the underlying stability issues of the FGs. [ABSTRACT FROM AUTHOR]

Load forecasting is of crucial importance for operations of electric power systems. In recent years, deep learning based methods are emerging for load forecasting because their strong nonlinear approximation capabilities can provide more forecasting precision than conventional statistical methods. However, they usually suffer from some problems, e.g., the gradient vanishment and over-fitting. In order to address these problems, an unshared convolution based deep learning model with densely connected network is proposed. In this model, the backbone is the unshared convolutional neural network and a densely connected structure is adopted, which could alleviate the gradient vanishment. What is more, we use a regularization method named clipped $L_2$ -norm to overcome over-fitting, and design a trend decomposition strategy to address the possible distribution differences between the training and validation data. Finally, we conduct five case studies to verify the outperformance of our proposed deep learning model for deterministic and interval load forecasting. Two high-voltage and an medium-voltage real load datasets from Australia, Germany and America are used for model training and validation, respectively. Results show that the proposed model can achieve higher load forecasting accuracy, compared with other existing methods including the popular conventional methods such as naive forecast and generalized additive model, and deep learning methods, e.g., long short-term memory network, convolutional neural network, fully connected network, etc. [ABSTRACT FROM AUTHOR]

Inverter-based generation sources’ significant uptake has seen most power system operators place a strong focus on unlocking their capability to respond to frequency excursions. Consequently, the effective utilization of conventional generation assets to improve frequency regulation in power systems has received less focus. This letter highlights two crucial aspects (governor deadbands and governor inactivity) pertinent to conventional generation assets, which must be considered by the system operator when operating power systems with a high share of inverter-based sources. Poor governor control is shown to significantly impact frequency regulation, thus undermining power system operation and performance, in an Australian case study. Furthermore, a high share of governor inactivity causes power system instability owing to degradation in governor response. For power systems with a high share of inverter-based sources, implementation of properly chosen governor deadbands and mandatory governor response is recommended to improve system frequency regulation. [ABSTRACT FROM AUTHOR]