Search

Due to the high-performance requirements of power converters in industrial applications, sliding-mode control has drawn extensive research attention for its insensitivity against external disturbances. In order to ensure this advantage while suppressing the chattering problem caused by discontinuous switching functions, in this article, a fuzzy sliding-mode control (FSMC) strategy consisting of three control loops is proposed for three-phase three-level neutral-point-clamped active front-end rectifiers. In the power tracking loop, an improved super-twisting algorithm is proposed to enforce the tracking errors of active power and reactive power to bounded regions in finite time and guarantee the transient performance. Next, in the dc-link voltage regulation loop, the regulation error of dc-link voltage converges to a bounded region with a super-twisting extended state observer-based FSMC strategy. A simple but efficient proportional-integral controller is employed in dc-link voltage balancing loop to reduce the voltage difference between two dc-link capacitors. The proposed controller is characterized by attenuated chattering phenomenon and improved the dc-link voltage regulation performance, disturbance rejection ability, and power tracking performance. Experimental results are provided to verify the effectiveness and superiority of the proposed strategy. [ABSTRACT FROM AUTHOR]

In this article, a two-stage control scheme consisting of an adaptive-gain second-order sliding mode (SOSM) controller and a switched high-gain observer (HGO) is proposed for the three-level neutral-point-clamped (NPC) converter. The adaptive-gain SOSM control method is applied both in the voltage regulation loop and instantaneous power tracking loop, thus, the boundary of the disturbance derivative does not need to be known a priori. Compared with the fixed-gain SOSM, it provides a faster dynamic and a better steady-state response for the NPC converter. On the other hand, the conventional disturbance compensation observer used in the power system suffers from the adverse effects of measurement noise, which limits the performance of the observer. A switched HGO is combined with the adaptive-gain SOSM controller in the voltage regulation loop to address this issue. By using a switched observer gain, the switched HGO greatly diminishes the performance degradation induced by the inevitable measurement noise. Finally, several experiments between the representative extended state observer-based SOSM control scheme and the proposed control method are carried out for a comparison. The results demonstrate the feasibility and effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper proposes a novel control strategy for three-level neutral-point-clamped (NPC) power converter. The proposed control scheme consists of three control loops, i.e., instantaneous power tracking control loop, voltage regulation loop, and voltage balancing loop. First, in the power tracking control loop, a set of adaptive sliding mode controllers are established to drive the active and reactive power tracking to their desired values via radial basis function neural network technology. In the voltage regulation loop, an efficient but simple adaptive controller is designed to regulate dc-link output voltage where the load is considered as an external disturbance. Moreover, a composite controller is developed in the voltage balancing loop to ensure imbalance voltages between two dc-link capacitors close to zero, in which a reduced-order observer is used to estimate sinusoidal disturbance improving the converter performance. The effectiveness and superiority of the proposed control strategy for the NPC power converter are compared with other control schemes through experimental results. [ABSTRACT FROM AUTHOR]

In this article, a shielding scheme based on ferrite magnetic antennas (SS-FMA) is proposed. The scheme can effectively provide a path for the magnetic field lines of three-dimensional couplers to be concentrated and conducted. The SS-FMA is considered to be applied for long range inductive power transfer (IPT) systems of post insulators to powering smart grid sensors and improve the efficiency under the influence of metal components. The negative influence of the aluminum flanges on the magnetic field distribution is analyzed. The suppression effects of the shielding scheme on the abovementioned influence have been analyzed. Parameters of the SS-FMA are optimized. The equivalent circuit model is established, and the abovementioned process is explained from the perspective of the circuit model. A prototype of a post insulator that includes IPT system and SS-FMA has been built. When the coils of the IPT system are attached to the flanges, the efficiency can still reach 47.8% under the influence of SS-FMA, which is an increase of 13.7% compared with no shielding scheme. When the coils are slightly away from the flanges, efficiency of the system including SS-FMA can be quickly improved to 54.3%. [ABSTRACT FROM AUTHOR]