Search

This article presents a novel reduced order average model for dual-active-bridge converter which can be applied to all modulation methods, such as single-phase-shift modulation, dual-phase-shift modulation, extended-phase-shift modulation and triple-phase-shift modulation. This model considers conduction, inductance, and transformer power losses. Furthermore, the input–output filters are suitable for system performance analysis. Based on the large-signal average model, the small-signal model and the output transfer function are derived. The detailed model for predicting the large-signal transient is established and the small signal analysis in frequency domain is carried out. This model can accurately predict the steady-state and transient-state response of the system. The experimental results agreed well with the simulation results which proved the accuracy and correctness of the model. [ABSTRACT FROM AUTHOR]

Modularity and high reliability from redundancy are the two attractive advantages of modular multilevel converters (MMCs). This paper elaborates a switch open-circuit fault diagnosis and a fault-tolerant operation scheme for MMCs with distributed control. The proposed fault diagnosis and fault-tolerant control method can significantly improve the reliability of the MMC while maintaining the modularity of its software implementation. By distributing fault diagnosis into submodules, its local controller is capable of identifying the switching devices in open-circuit fault without extra hardware circuitry. Based on the real-time measurements of submodule terminal voltage and arm current, single, or multiple faulty switches can be identified within 3.5 ms without triggering faulty alarms. Furthermore, a new fault-tolerant operation is proposed to maintain the output current, internal dynamics, and switching harmonics unchanged after the faulty submodule is bypassed. This is achieved by resetting the period and phase registers in the local controller according to the information of bypassed submodules. The control loops of the MMC are not influenced by the proposed fault diagnosis and fault-tolerant operation, making the operation transition seamless and reliable. Experimental results show that fault identification and system reconfiguration can be completed within 5 ms, and the MMC can seamlessly and smooth ride through the switch open-circuit faults without severe malfunction and catastrophic damages. [ABSTRACT FROM AUTHOR]

The droop control is an advantageous approach for stand-alone supply systems consisting of multiple batteries, allowing among various inverters without intercommunication. The droop coefficients of batteries always vary with their state-of-charge (SoC) and charge/discharge mode, resulting in small-signal instability. Nevertheless, the existing impedance-based approaches can only assess the droop coefficients stability point, but not the stability region. Therefore, this article proposes a droop coefficients stability region analysis approach. First, the charge/discharge SoC-based droop controlled battery, the P&Q controlled distributed generator and the constant power load are separately discussed. Meanwhile, the state matrix and return-ratio matrix are established, respectively. Furthermore, the novel forbidden region criterion based on the return-ratio matrix is constructed, which reduces conservatism compared with norm-based impedance criteria and partial forbidden region criteria. Such a forbidden region criterion is first switched to the Hurwitz identification problem regarding the equivalent return-ratio matrix. Combined the state matrix and the equivalent return-ratio matrix, the generalized incidence matrix is constructed to simultaneously identify subsystem stability and interactive stability. Based on the generalized incidence matrix, an adaptive step search strategy is proposed to obtain the droop coefficients coordinated stability region. Finally, the simulation and experimental results illustrate the validity of the proposed method. [ABSTRACT FROM AUTHOR]

In this article, a novel bidirectional dc–dc converter (BDC) consisting of an active switched-inductor (A-SL) cell, a zero current ripple cell and an auxiliary capacitor cell is proposed for the battery energy storage system. The proposed BDC integrates with the advantages of high voltage conversion ratio, low power switch voltage stresses, zero ripple current on the low voltage side (LVS), and constant potential difference between the grounds of LVS and high voltage side. Thanks to the use of synchronous rectification technology, the efficiency of the proposed BDC is increased. The operating principles, the characteristics analysis and the parameter design of the proposed BDC are given. In addition, to show the merits of the proposed BDC, a comparison study involves the proposed converter and other BDCs is demonstrated. Finally, some experimental results obtained using a 1000 W prototype are presented to valid the effectiveness of the proposed BDC. 96.43% and 96.67% maximum conversion efficiencies can be achieved in the step-up and step-down modes, respectively. [ABSTRACT FROM AUTHOR]

The traditional finite-control-set model predictive control (FCS-MPC) method for a cascaded H-bridge (CHB) rectifier has two main issues: heavy computational burden and low steady-state current performance. In this paper, a novel FCS-MPC method has been proposed for a single-phase CHB rectifier. The proposed method solves the optimization problem of FCS-MPC for one cell by one cell, like a “pipeline.” In the proposed method, the sampling period is divided into equal intervals by the number of cells. At the beginning of the first interval, the first cell selects its switching state to be applied. Then, the following cell selects its switching state to be applied at the beginning of next interval. Finally, the selected switching state of last cell will be applied at the beginning of the last interval. A cost function presenting the control objectives of common source current error and itself dc-link voltage error is evaluated for each cell. A single-phase three-cell CHB rectifier controlled by a DSpace DS1104 is tested and the experimental results show that a significant reduction in computational time, an improved steady-state current performance, and a comparable dynamic response are achieved in the proposed method in comparison with the traditional FCS-MPC method. [ABSTRACT FROM AUTHOR]