Search

Inverse magnetron injection gun (IMIG) provides several advantages over simple MIG especially in high-power, high-frequency gyrotron. Sub-millimeter (>230 GHz), high-power (≥1 MW) gyrotrons would be required in futuristic plasma fusion machines to fulfill the need of tens of megawatt RF power for electron cyclotron resonance heating. Here, in this paper, an IMIG is designed for 0.24-THz, 1-MW gyrotron. First, the tradeoff design equations and technical constraints are used to synthesize the electrodes geometry and electrical parameters of IMIG. This synthesized IMIG model is further simulated to finalize the design using electron trajectory code EGUN. Simultaneously, the magnet system including the auxiliary gun coils and superconducting magnets (SCM) is also designed and the obtained magnetic field profile is used in the IMIG simulations. In the case of high-power MIG, the suppression of the beam halo is a major design concern and analyzed critically in the present IMIG design. The shape of the modulating anode and main anode is optimized to make a beam halo shielding. This IMIG is designed for a very high-order mode (TE46,17) simple cylindrical cavity, which confines the range of the tolerance in the electron beam parameters. So, a detailed parametric and misalignment analysis is also performed with respect to the electron beam parameters, such as pitch factor, velocity spread, and guiding center radius spread. These parametric and misalignment analyses would be utter helpful in the fabrication, assembling and testing of the IMIG as well as gyrotron. [ABSTRACT FROM AUTHOR]

This paper describes the design of a 0.3-THz gyrotron at second harmonic operation. The interaction cavity design and the beam–wave interaction computation are carried out for TE0,6 mode by using the particle-in-cell electromagnetic simulation approach. The simulation results confirm >6\-kW output power with efficiency \sim17\% by using an electron beam with accelerating voltage 20 kV and current 2.0 A. To achieve the required electron beam parameters, a triode magnetron injection gun is designed. The transverse-to-axial velocity ratio (\alpha), 1.27 and the transverse velocity spread <4\% are realized. Considering the fabrication and operation of the device, the parametric analysis is also performed. [ABSTRACT FROM PUBLISHER]

A triode magnetron injection gun (MIG) is designed for a 1-MW 170-GHz gyrotron, which will be used in an electron cyclotron resonance heating system for the International Thermonuclear Experimental Reactor. The initial design of MIG is performed by using the in-house code MIGSYN. For the electron-beam emission and propagation, the 2-D code EGUN is implemented. The transverse-to-axial velocity ratio \alpha is 1.37, and the transverse velocity spread less than 4% is realized. The results are also validated against two other 2-D and 3-D codes, i.e., TRAK and CST-Particle Studio, respectively, which are in close agreement. From the fabrication and operation point of view, the parametric analysis and misalignment study of electron beam are also performed. [ABSTRACT FROM PUBLISHER]

The gyrotron that operates with a double electron beam is designed and presented. The design of a 42-GHz 200-kW gyrotron at \TE03 mode has been done and presented elsewhere. To enhance the RF power without losing the interaction efficiency of the 42-GHz gyrotron, double electron beams are launched into the cavity. The beam–wave interaction calculations and power and frequency growth estimation are performed and compared with the single-beam operation results. In the design of the gyrotron, in-house developed codes, GCOMS, MIGSYN, and MIGANS, as well as commercially available codes MAGIC and EGUN are used. The results show that more than 400 kW of power is not possible by single-beam operation while the double-beam operation shows this amount of power with the same mode. To achieve the double electron beams of the desired parameters at the cavity region, the double-beam magnetron injection gun (MIG) is designed. The results of the interaction cavity and MIG show the feasibility of the double-beam gyrotron for high-power and high-efficiency operation. [ABSTRACT FROM PUBLISHER]

In this paper, the design of a triode-type magnetically tunable magnetron injection gun (MT-MIG) is presented for 1-MW 110-, 120-, and 127.5-GHz-frequency gyrotrons with the various operating modes. Some basic equations relevant to the problem available in the literature have been used to obtain the preliminary design. Computer simulation has been performed by using the commercially available code EGUN. The triode-type MT-MIG with the accelerating voltage of 80 kV, the beam current of 40 A, the average transverse-to-axial velocity ratio of the electron beam of 1.26–1.35, and the maximum transverse velocity spread of less than 5% has been designed. Tuning of the MT-MIG is performed by varying the magnetic field. [ABSTRACT FROM AUTHOR]