Search

A $Q$ -band traveling-wave tube (TWT) with profiled helix pitches and profiled inner diameters of slow wave structure (SWS) is proposed. The transmission characteristics of the $Q$ -band TWT are simulated by the Computer Simulation Technology (CST). In the operating frequency band (36.5–41.5 GHz), the simulated voltage standing wave ratio (VSWR) is less than 1.5. In addition, the beam–wave interaction is simulated to predict the performance of the $Q$ -band TWT when the beam voltage and beam current are 8.5 kV and 60 mA, respectively, and the axial focusing magnetic field is 0.4 T. In the operating frequency band, the self-oscillation is well suppressed, and the device efficiency of the $Q$ -band TWT exceeds 63.5%, and the saturated output power and gain exceed 83 W and 45 dB, respectively, especially the device efficiency can reach the maximum of 69.5% at 37 GHz. When it is backed off 6 dB from the saturation, the device efficiency exceeds 40.5%, up to 42.7% at 39 GHz. Preliminary experiments have confirmed the design. These results show that the proposed $Q$ -band TWT has important applications to the next generation wireless communication system with high efficiency. [ABSTRACT FROM AUTHOR]

The miniaturized traveling wave tube (TWT) is a kind of high-efficiency, high-power, long-lifetime power amplifier which is an attractive choice for many applications, such as outer space exploration, phased array radar detection, unmanned aerial vehicle (UAV) communication, and on-chip application. In this article, a sheet beam miniaturized TWT with V-shaped meander-line slow wave structure (SWS) supported by two trapezoidal ceramic rods is designed. First, the dispersion characteristics, the impedance characteristics, and the S-parameters of the V-shaped meander-line SWS are analyzed in detail. Then, the particle-in-cell (PIC) simulation results predict that the TWT can produce 512-W output power driven by a 7.1 kV, 0.3-A sheet beam with a rectangular cross-sectional area of 3.5 mm $\times0.1$ mm. The TWT can cover the whole ${X}$ -band when the operation voltage shift from 7.1 to 9.1 kV. At last, the V-shaped meander-line SWS is manufactured, assembled, and tested. The good agreement between the simulated and the measured ${S} _{\mathbf {11}}$ has been achieved and the mismatch between the simulated and the measured ${S} _{\mathbf {21}}$ has been discussed at the end. [ABSTRACT FROM AUTHOR]

A novel slow wave structure (SWS), named staggered double corrugated waveguide (SDCW), is proposed for the development of wideband high-power terahertz (THz) traveling wave tubes (TWTs). The SDCW-SWS not only has the wideband characteristic of staggered double grating (SDG) but also has the high interaction impedance characteristic of symmetrical double grating. In addition, its tunnel width is independent of the lower cutoff frequency and can be further increased. Numerical Eigen mode calculations show that, under the same dispersion, the passband of SDCW-SWS is increased by more than 10 GHz compared with SDG-SWS, and the average interaction impedance at 195 GHz is increased by about 62%. A particle-in-cell simulation analysis confirms that the average output power, saturated gain, and electron efficiency of SDCW-TWT at 195 GHz are ~110 W, ~20.34 dB, and ~5.46%, respectively, when the operating voltage is 20 kV and the beam current is 100 mA. Therefore, SDCW is a promising slow wave circuit of wideband high-power THz traveling wave amplifier. [ABSTRACT FROM AUTHOR]

This paper puts forward a novel dual-beam overmoded folded waveguide (FW) slow-wave structure (SWS), which is loaded with photonic crystals. In this novel structure, the two electron beams pass through the small gaps between the photonic crystal structures and the FW; the dimension of the FW is twice larger than that of the fundamental mode structure. The novel dual-beam photonic crystal overmoded FW traveling-wave tube (TWT) is proposed on the basis of the SWS. And, a mode converter is introduced to achieve the connection between the SWS and the input/output structure, and the mode transformation. At the operating voltage of 21.2 kV and the operating current of 320 mA, the proposed TWT can generate 128 W of output power at 220 GHz, and its 3-dB bandwidth is 7 GHz, ranging from 216 to 223 GHz. [ABSTRACT FROM AUTHOR]

The symmetrical microstrip angular log-periodic meander-line (ALPML) slow-wave structure (SWS), which is suitable for Ka-band low-voltage traveling-wave tubes, is described in this paper. The dispersion characteristics and coupling impendence of this kind of SWS are achieved by simulation. A radial uniform magnetic field of 0.4 T is developed using radially magnetized permanent magnets to focus the radial sheet electron beam. To exploit the potentialities of the symmetrical ALPML SWS, the beam–wave interaction is carried out with a radial convergent and a divergent sheet electron beam. For the radial divergent electron beam with a voltage of 791 V and a current of 0.3 A, an output power over 60 W with an electron efficiency of 26% at 30 GHz is achieved from particle-in-cell simulation. The effects of misalignments and phase mismatches are carried out at the end. [ABSTRACT FROM AUTHOR]

To improve the output power and electron efficiency and broaden the operating bandwidth, the three-gap extended output cavity was used in the relativistic klystron to replace the single-gap output cavity. The high-frequency characteristics of the three-gap extended cavity were studied. The electron load conductance was derived and corrected based on the theory of relativity, by which a more accurate relation of electron load conductance versus transmit angle can be obtained. The characteristic impedance is three times bigger than that of the single-gap cavity under the case of the $2\pi $ mode, which can improve the M^{2}(R/Q) and the beam–wave interaction efficiency. The model of sheet beam klystron (SBK) is comprised of three-gap input cavity, two-gap first idler, three-gap second idler cavity, and three-gap output cavity. The 3-D particle-in-cell simulation results show that for a 500 kV, 1 kA, 40.134 GHz, and 20 W input power, the SBK is capable of generating an output power higher than 142 MW with the gain of 68.5 dB, maximum interaction efficiency of 28.4%, and 3-dB bandwidth of 240 MHz. [ABSTRACT FROM PUBLISHER]

In this paper, a wideband 220-GHz sheet-beam traveling-wave tube (TWT) based on staggered double vane slow-wave structure (SWS) is investigated. A novel method of loading the attenuator into the SWS for suppressing backward wave oscillation is proposed. In addition, a novel focusing electrode of the sheet beam gun is carried out in this paper, which is a whole structure but divided into two parts artificially, one is used to compress the electron beam in $X$ -direction and the other is used to compress the electron beam in $Y$ -direction. In addition, a novel anode is redesigned to reduce the defocusing effect caused by the equipotential surfaces. A nonuniform periodically cusped magnet is used for focusing the sheet electron beam, which is predicted to exhibit 100% beam transmission efficiency in a 75-mm length drift tube. The high-frequency characteristics of the SWS and the beam-wave interaction are also studied. The results reveal that the designed TWT is expected to generate over 78.125-W average power at 214 GHz, and the 3-dB bandwidth is 31.5 GHz, ranging from 203 to 234.5 GHz. [ABSTRACT FROM PUBLISHER]

A new kind of radial convergent sheet beam electron optical system, which can be used in low voltage Ka-band radial electron devices, is studied in this paper, including the beam production, transmission, and focus. A novel radial high perveance electron gun is proposed, and its volt-ampere characteristics are obtained by means of simulation. The focusing system using permanent magnet rings is put forward, by which a radial uniform magnetic field can be obtained. With the electron gun and focusing system, a 1600 V, 8 A, and 0.04-mm thickness radial convergent sheet beam was produced, and the simulation result shown that it can pass through a 16-mm \(\times 0.06\) -mm radial channel 100%. [ABSTRACT FROM PUBLISHER]

It is attractive to use sheet beam vacuum devices to generate high frequency, high-power microwave radiation. In this paper, we present the numerical and experimental studies of a high-power Ka-band sheet electron beam backward wave oscillator (BWO), in which the double-grating rectangular waveguide is used as the slow wave structure (SWS) for its thermal and mechanical robustness. The fundamental mode of this kind of SWS is an antisymmetric mode which has an antisymmetric longitudinal field distribution and will nonsynchronously interact with the electron beam on two sides of the electron channel along the vertical direction. We put forward a method to overcome this trouble in this paper. To drive this BWO, a high-power sheet beam is used with a cross section of 30 mm $\times\,$ 1 mm. A thin graphite cathode is used for its superiority in producing a high current, high-quality electron beam. For an experimental electron beam of 141 kV and 1668 A, the output power of over 46.8 MW at 31.68 GHz is obtained, which corresponds to a beam–wave interaction efficiency of 19.9%. Compared with the conventional hollow beam BWO and the single-grating rectangular waveguide sheet beam BWO, the double-grating sheet beam BWOs efficiency is higher, which indicates that the double-grating sheet beam device is promising for producing millimeter wave radiation with high power and high efficiency. [ABSTRACT FROM PUBLISHER]

A novel slow wave structure (SWS) named angular log-periodic meander-line is proposed for a radial traveling wave tube (TWT). In this paper, a 30 log-periods microstrip angular log-periodic meander-line SWS is studied. The dispersion of this kind of SWS is weak, which shows that it can work in a wide operating bandwidth. The more important advantage is that the operating voltage is much lower than that of the conventional TWT at the same operating frequency and the geometrical dimension is also much smaller than that of the conventional TWT. The beam–wave interaction of the angular log-periodic meander-line TWT is calculated using the particle-in-cell method. When the operating voltage is 1624 V, this kind of TWT can give 156.5-W output power at 35 GHz, the gain is 21.9 dB, and the electron efficiency is \sim17.7\%. With this kind of TWT as mentioned, the concept of radial integrated angular log-periodic meander-line TWT is proposed, which can provide a new way to obtain higher output power. [ABSTRACT FROM PUBLISHER]