Search

In this paper, a novel terminated coupled line structure (TCLS) is introduced, which is constructed by a coupled line section and four terminations loaded on it. Introducing different kinds of terminations, three types of bandpass filters (BPFs) based on TCLSs are proposed, theoretically analyzed, and fabricated, including two single-ended wideband BPFs with fractional bandwidths (FBWs) of 67% and 40% respectively, and a wideband differential BPF with 74% differential-mode FBW. These BPFs can achieve wide passband bandwidth, low in-band insertion loss, high passband selectivity, as well as deep stopband rejection performance simultaneously, benefited from the multiple transmission zeros and transmission poles obtained by the TCLSs. The practical design procedures of these BPFs are presented and explained. The agreement among theoretical predictions, EM-simulated, and measured results validates our proposed filter structures. Finally, the generalized multistage filter topology based on TCLSs is proposed to design high-order filters with better filtering performances. [ABSTRACT FROM PUBLISHER]

This paper presents a new class of dual-, tri- and quad-band BPF by using proposed open stub-loaded shorted stepped-impedance resonator (OSLSSIR). The OSLSSIR consists of a two-end-shorted three-section stepped-impedance resistor (SIR) with two identical open stubs loaded at its impedance junctions. Two 50-\Omega tapped lines are directly connected to two shorted sections of the SIR to serve as I/O ports. As the electrical lengths of two identical open stubs increase, many more transmission poles (TPs) and transmission zeros (TZs) can be shifted or excited within the interested frequency range. The TZs introduced by open stubs divide the TPs into multiple groups, which can be applied to design a multiple-band bandpass filter (BPF). In order to increase many more design freedoms for tuning filter performance, a high-impedance open stub and the narrow/broad side coupling are introduced as perturbations in all filters design, which can tune the even- and odd-mode TPs separately. In addition, two branches of I/O coupling and open stub-loaded shorted microstrip line are employed in tri- and quad-band BPF design. As examples, two dual-wideband BPFs, one tri-band BPF, and one quad-band BPF have been successfully developed. The fabricated four BPFs have merits of compact sizes, low insertion losses, and high band-to-band isolations. The measured results are in good agreement with the full-wave simulated results. [ABSTRACT FROM PUBLISHER]

Two novel wideband differential bandpass filters based on a T-shaped structure are proposed in this paper. Broad passband and wideband harmonic suppression for the differential/common mode can be easily achieved for the wideband differential filter without cross coupling, due to the controlled resonator frequencies of the shorted/open T-shaped structure. In addition, another more compact differential filter using cross coupling is proposed with two transmission zeros close to the passband to improve the selectivity for the differential mode. To verify the presented concept, two prototypes (\varepsilon r = 2.65, h = 0.5~\ mm) with 3-dB fractional bandwidth of 70% and 70.7% for the differential mode and insertion loss greater than 13.5 dB for common mode (0–19 GHz) are designed and fabricated. Good agreement can be observed between measured results and theoretical expectations. [ABSTRACT FROM AUTHOR]