Search

This paper introduces a new design process for miniature coupled resonator filters with mixed couplings, which can better preserve wideband response matching with coupling matrix prototype. A special type of matrix transformation is introduced in this paper to transform the coupling matrix into a configuration that consists of an equal number of capacitive and inductive main couplings. Based on this, lumped-element circuit models can be produced. Then, by using \pi to \bf T transformations for some parts of the circuit, all the elements have realizable values. A miniature bandpass filter with a fractional bandwidth of 20% of this type based on N\times N coupling matrix is demonstrated with both simulated and measured response. The filter is implemented using multilayer liquid crystal polymer circuit technology and has a compact size of 0.0294\lambda g \times 0.0303\lambda g \times 0.00052\lambda g, where \lambda g is the guided wavelength at the center frequency of 250 MHz. [ABSTRACT FROM AUTHOR]

This paper proposes a novel class of wideband metal cavity multiple-mode bandpass filters (BPFs), consisting of a triple-mode filter and a quadruple-mode filter. Two TE11 degeneration modes in a single metal cavity are excited by using an off-centered approach instead of a traditional corner-cut approach. They work together with the TM10 mode to constitute a three-pole wide passband with a fractional bandwidth of 30% at the central frequency of 3.2 GHz. Moreover, an off-centered metal cylinder can properly excite an extra TM11 mode in the passband. As such, this TM11 mode, TM10 mode, and a pair of degeneration TE11 modes can be simultaneously utilized to form a quadruple-mode BPF. Compared with the triple-mode BPF, the quadruple-mode BPF has better performance in term of the steepness of rejection skirt. The fractional bandwidth of this BPF can achieve up to 31%. In final, the two proposed BPFs are fabricated by using the silver plated aluminum technology. Measured S-parameter frequency response and group delay have satisfactorily matched with the simulated results. [ABSTRACT FROM PUBLISHER]

This paper presents a new class of dual-, tri- and quad-band BPF by using proposed open stub-loaded shorted stepped-impedance resonator (OSLSSIR). The OSLSSIR consists of a two-end-shorted three-section stepped-impedance resistor (SIR) with two identical open stubs loaded at its impedance junctions. Two 50-\Omega tapped lines are directly connected to two shorted sections of the SIR to serve as I/O ports. As the electrical lengths of two identical open stubs increase, many more transmission poles (TPs) and transmission zeros (TZs) can be shifted or excited within the interested frequency range. The TZs introduced by open stubs divide the TPs into multiple groups, which can be applied to design a multiple-band bandpass filter (BPF). In order to increase many more design freedoms for tuning filter performance, a high-impedance open stub and the narrow/broad side coupling are introduced as perturbations in all filters design, which can tune the even- and odd-mode TPs separately. In addition, two branches of I/O coupling and open stub-loaded shorted microstrip line are employed in tri- and quad-band BPF design. As examples, two dual-wideband BPFs, one tri-band BPF, and one quad-band BPF have been successfully developed. The fabricated four BPFs have merits of compact sizes, low insertion losses, and high band-to-band isolations. The measured results are in good agreement with the full-wave simulated results. [ABSTRACT FROM PUBLISHER]

Two novel wideband differential bandpass filters based on a T-shaped structure are proposed in this paper. Broad passband and wideband harmonic suppression for the differential/common mode can be easily achieved for the wideband differential filter without cross coupling, due to the controlled resonator frequencies of the shorted/open T-shaped structure. In addition, another more compact differential filter using cross coupling is proposed with two transmission zeros close to the passband to improve the selectivity for the differential mode. To verify the presented concept, two prototypes (\varepsilon r = 2.65, h = 0.5~\ mm) with 3-dB fractional bandwidth of 70% and 70.7% for the differential mode and insertion loss greater than 13.5 dB for common mode (0–19 GHz) are designed and fabricated. Good agreement can be observed between measured results and theoretical expectations. [ABSTRACT FROM AUTHOR]