Search

A Midwestern pulp and paper mill had arc-flash ratings around 100 cal/cm2 on 50 480-V unit substations. New relays were installed to replace the existing protection and add light detection to improve arc-flash detection times. During a couple of one-day outages, sample installations took place. During the cold mill outage, 44 installations were completed over 12 days by working around the clock. Old relays were removed, new plates were mounted and wired in, and fiber sensors were routed through the buswork and into the breaker cubicles. Updated arc-flash studies show an average arc-flash rating reduction of 90%. [ABSTRACT FROM AUTHOR]

Special Feature that lists the names of people involved in the review of technical papers for the IEEE Transactions on Industry Applications and Industry Applications Magazine. [ABSTRACT FROM AUTHOR]

Measurement of transformer remaining useful life has long been a goal for responsible asset management. Most testing laboratories offer furan concentration testing as a suitable method. The interpretive method of choice is usually the Chendong equation, expressed in practical terms as degree of polymerization of the paper with new paper at about 1000 and end of life at around 300. Typical mill transformers have thermal insulation ratings expressed as 55 °C rise for plain kraft or 65 °C, which corresponds to thermally upgraded kraft paper (TUP). It has been determined that TUP does not produce furans and, thus, provides a false indicator of the cellulose breakdown. There are several recent papers that have demonstrated that a measurement of methanol (MeOH) may be a better method to determine ageing of the TUP insulation and also better for transformers with plain kraft paper insulation. The objective of this paper is to provide an overview of the reasons why furans should not be used as the basis for measuring aging of thermally upgraded paper, why MeOH should be so used, and to compare actual furans and MeOH test data for service aged transformers in a process industry application [ABSTRACT FROM AUTHOR]

Special Feature that lists the names of people involved in the review of technical papers for the IEEE Transactions on Industry Applications and Industry Applications Magazine. [ABSTRACT FROM AUTHOR]

Presents the list of reviewers who contributed to this publication in 2020. [ABSTRACT FROM AUTHOR]

Presents a listing of the editorial board, board of governors, current staff, committee members, and/or society editors for this issue of the publication. [ABSTRACT FROM AUTHOR]

The article presents the list of reviewers focused on recognition of 2017 transactions and magazine paper.

Fuses are commonly used to provide medium voltage (MV) protection to distribution transformers. Unfortunately, there are certain deficiencies introduced when primary-side fuses are used. In paper mill power systems, given the unique organization of the paper mill loads around individual feeders to facilitate load shedding, it may be advantageous to provide transformer differential relay protection from the primary of the transformer to the load side of the main secondary breaker instead of primary fuse protection. This protection can then trip either a primary-side grounding switch (with fuses) or a primary-side feeder circuit breaker using a fiber or a WiMAX (Worldwide Interoperability for Microwave Access) connection. Protection against overload is provided by a secondary main circuit breaker and by design. [ABSTRACT FROM AUTHOR]

Presents a listing of the editorial board, board of governors, current staff, committee members, and/or society editors for this issue of the publication. [ABSTRACT FROM AUTHOR]

A list of periodical staff is presented including the editor-in-chief, the industrial and commercial power system department, and the industrial power conversion systems department.

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

Presents a listing of the editorial board, board of governors, current staff, committee members, and/or society editors for this issue of the publication. [ABSTRACT FROM AUTHOR]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

The article offers information on the procedure for submission of a research paper in the fields of electrical and electronics engineering.

Presents a listing of the editorial board, board of governors, current staff, committee members, and/or society editors for this issue of the publication. [ABSTRACT FROM AUTHOR]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

A list of the department members of the publication "Institute of Electrical and Electronics Engineers (IEEE) Transactions on Industry Applications" as of May 2021 is presented including editor-in-chief Thomas A. Nondahl, technical department vice-chair Rasheek Rifaat, and papers review chairperson Shesha Jayaram.

Provides a listing of current committee members and society officers. [ABSTRACT FROM AUTHOR]

The article lists the reviewers of the journal including Francisco Azcondo, John P. Barton and Edson Bortoni.

The article lists the editors of the periodical including Rob Hoerauf, James Harvey, and Enrico Santi.

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

The article offers information on Procedure for Submitting a Paper, presenting Directly Submitted Papers at an IAS-Sponsored Conference, and Review Process of the periodical.

Presents the reviewers who contributed to this publication in 2015. [ABSTRACT FROM AUTHOR]

Presents a listing of the editorial board, board of governors, current staff, committee members, and/or society editors for this issue of the publication. [ABSTRACT FROM AUTHOR]

The article list the IEEE Transactions On Industry Applications including H. Landis Floyd, Richard Schmidt, and Ken White.

The article provides information on the bimonthly publication "Institute of Electrical and Electronics Engineers (IEEE) Transactions on Industry Application" of interest to authors including topics of paper to be submitted, procedure for submitting a paper, and copyright policy of the IEEE.

Lists the reviewers who contribute to IEEE Industry Applications Magazine and the IEEE Transactions on Industry Applications in 2014. [ABSTRACT FROM PUBLISHER]

The article presents the papers submitted for presentation, and authors of papers sent directly to the Editor.

Provides instructions and guidelines to prospective authors who wish to submit manuscripts. [ABSTRACT FROM AUTHOR]

The article presents a list of Institute of Electrical and Electronics Engineers transactions on industry applications from Industrial and Commercial Power Systems Department, Industrial Power Conversion Systems Department, and Manufacturing Systems Development and Applications Department.

Provides a listing of current committee members and society officers. [ABSTRACT FROM AUTHOR]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

A list of the officers of the "IEEE Transactions on Industry Applications" is presented, including Industrial and Commercial Power Systems Department Vice Chair Rasheek Rifaat, Papers Review Chair Sergio Panetta, and Process Industries Department Vice-Chair H. Landis Floyd.

The article provides information for authors presenting papers to the journal "IEEE Transactions on Industry Applications," including the criteria for the acceptance of papers, submission of papers for presentation at a technical conference in response to a call for papers, and how information concerning conferences may accessed.

The article lists several personnel of Institute of Electrical and Electronics Engineers (IEEE) transactions of applications of several departments.

Chipper motors in pulp and paper mill environment are of special design—the stability on impact loads is one important consideration. The power factor under normal operation will continuously swing due to varying loads. This paper describes the guesswork-free rigorous calculations of pull-out (out-of-step) power factor based on the parameter of an actual installation. Single phasing is rather a rare occurrence; however, such an event has been experienced in an installation due to overheating and arcing at the fuse clips in a NEMA E2 starter of a chipper motor. Discussions on the single-phase protection of synchronous motors and recommended settings are provided. [ABSTRACT FROM AUTHOR]

An introduction is presented in which the author discusses the topics include IEEE Transactions on Industry Applications; Technical Committees; and instructions for submitting the paper.

Provides a listing of current committee members and society officers. [ABSTRACT FROM AUTHOR]

Presents a listing of the editorial board, board of governors, current staff, committee members, and/or society editors for this issue of the publication. [ABSTRACT FROM AUTHOR]

These instructions give guidelines for preparing papers for this publication. Presents information for authors publishing in this journal. [ABSTRACT FROM AUTHOR]

Provides instructions and guidelines to prospective authors who wish to submit manuscripts. [ABSTRACT FROM AUTHOR]

The article offers several information for authors by the periodical of Institute of Electrical & Electronics Engineers (IEEE), including procedure for submission of papers, talks about discussion and closure time of paper publication, and mentions about transmittal instructions.