Search

Load commutated inverters (LCIs) are still widely used for their robustness and reliability in high-power synchronous motor drives, in either single or multiple three-phase configurations. A restriction to their use in high-speed applications is due to the criticalities of thyristor operation at high switching frequencies. The upper frequency limits of LCIs are usually addressed in the existing literature as something independent of the drive architecture. On the contrary, this paper highlights how the maximum frequency that can be safely attained closely relates to the number of LCIs that are used to supply the synchronous motor. In fact, moving from a single to multiple three-phase arrangements is proved to introduce more stringent frequency constraints due to the mutual interaction between stator windings during commutations. Frequency limits for safe operation of single- and multiple-LCI drives are derived in quantitative terms and experimentally assessed on a 2-MW synchronous motor fed by a couple of LCIs. Practical implications of such limits in the design of high-power high-speed drives are finally discussed.

Salient-pole synchronous machines are conventional electric machines which have been widely used and studied over decades. Some aspects of their modeling and analysis, however, still constitute a challenge for designers and require state-of-the-art methodologies to be applied. As an example, this paper addresses a 14-MVA salient-pole shipboard alternator, of which full-scale prototypes are built and tested with different damper cage designs. A time-stepping finite-element (FE) analysis is assessed against test results as a method to predict generator performance for the various damper cage design alternatives. FE simulations are shown to give accurate results even without model tuning if continuous end rings are used to short circuit damper bars. For the design solution with partial end arcs, model tuning is required, instead. For this purpose, a calibration method is proposed and successfully validated, which only requires a set of impedance measurements to be taken on the machine at standstill

Split-phase synchronous motors equipped with multiple-stator three-phase windings, each supplied by a load-commutated inverter, play an important role in today's very high power electrical-drive applications. A criticality of these systems is the possibility that commutations occur in different motor windings simultaneously. The resulting electromagnetic transient depends on the magnetic coupling of motor phases among them and with rotor circuits. In this paper, a model to describe this phenomenon is presented along with some dedicated tests, conducted on various split-phase configurations, to assess the model validity.