Search

This paper presents the establishment and operation control of a dc microgrid incorporating with electric vehicle (EV) as movable energy storage. The developed microgrid consists of a wind permanent-magnet synchronous generator ac source and a dc source, a battery/supercapacitor (SC)/flywheel hybrid energy storage system, and a grid-connected bidirectional single-phase three-wire (1P3W) load inverter. Various harvested ac and dc sources can be plugged into the microgrid via the developed interfaced power converters. In addition to good microgrid operation performance, the microgrid-to-grid and grid-to-microgrid operations can be successfully conducted with good power quality. As to the developed EV interior permanent-magnet synchronous motor drive, the SC auxiliary storage is equipped to assist the main battery source in intermittent energy conversion. Satisfactory acceleration/deceleration/reversible and regenerative braking operation characteristics are obtained via the developed power stages and control schemes. Moreover, the successful microgrid-to-vehicle and vehicle-to-microgrid interconnected operations of EV and microgrid are achieved. In addition, the vehicle-to-grid/grid-to-vehicle operations can be also performed via the developed 1P3W inverter. [ABSTRACT FROM AUTHOR]

This paper develops an electric vehicle switched-reluctance motor (SRM) drive powered by a battery/supercapacitor having grid-to-vehicle (G2V) and vehicle-to-home (V2H)/vehicle-to-grid (V2G) functions. The power circuit of the motor drive is formed by a bidirectional two-quadrant front-end dc/dc converter and an SRM asymmetric bridge converter. Through proper control and setting of key parameters, good acceleration/deceleration, reversible driving, and braking characteristics are obtained. In idle condition, the proposed motor drive schematic can be rearranged to construct the integrated power converter to perform the following functions: 1) G2V charging mode: a single-phase two-stage switch-mode rectifier based charger is formed with power factor correction capability; 2) autonomous V2H discharging mode: the 60-Hz 220-V/110-V ac sources are generated by the developed single-phase three-wire inverter to power home appliances. Through the developed differential mode and common mode control schemes, well-regulated output voltages are achieved; 3) grid-connected V2G discharging mode: the programmed real power can be sent back to the utility grid. [ABSTRACT FROM PUBLISHER]