Search

Direct modulation principle is widely used in modular multilevel converters (MMCs) for its simplicity and natural stability. However, it results in strong active and reactive power coupling. This paper carefully analyzes and identifies four power coupling paths and two power influence factors with the direct modulation principle. Full power decoupling of the MMC can be realized by cutting off the derived coupling paths and compensating the influence factors. However, this will further deteriorate the already poor damping of the MMC and significantly increase dc-bus current fluctuations. To solve this problem, the sources resulting in poor damping are identified and then a new closed-loop dc-bus current controller is incorporated into the control system. Finally, the proposed power decoupling strategy with the newly designed current controller realizes completely decoupled power regulation, avoids overload operation, and obviously improves the dynamic performance of the MMC. Furthermore, it increases the stability of the MMC system under all possible operation conditions. The proposed control strategy is confirmed by experimental results. [ABSTRACT FROM AUTHOR]

A high-performance three-phase pulse width modulation (PWM) converter with reduced dc-link capacitor under unbalanced ac voltage conditions is proposed in this paper. The unique feature of the converter lies in that sinusoidal symmetrical ac currents and ripple free dc voltage can be achieved simultaneously without using a bulky capacitor, which was thought to be a dilemma in the past. The control scheme is implemented in an α–β frame, so the complex rotate transformations are avoided, and it does not require the extraction of positive and negative sequence currents, which simplifies the control algorithm. A two-quadrant operation active power compensator together with its controller is developed to suppress the voltage ripple in the dc-link. Compared with the passive compensation method, the compensator is equipped with a smaller capacitor to reduce the system size, weight, and cost. Moreover, the compensator could be integrated with the conventional three-phase three-leg PWM converter seamlessly. The effectiveness of the proposed control schemes is verified by the experiment results. [ABSTRACT FROM PUBLISHER]