Search

Repetitive control strategies have been commonly applied in pulse-width-modulated (PWM) voltage source inverters (VSIs) for many industrial applications. This paper presents a repetitive controller for voltage harmonic mitigation of VSI-based islanded microgrids. The phase delay in the overall control system, e.g., the delay caused by the digital duty cycle calculation, PWM generation, and repetitive controller, has to be compensated by elaborately designed phase lead filters in order to prevent control performance deterioration and system instability. Nevertheless, quantificational analysis and practical design of the time advance unit in such filters are hardly found in existing literature works. In view of this, this paper proposes an explicit analysis of the phase lead filters and a novel design method of the time advance unit in repetitive controllers to ensure system stability. Moreover, with the help of the proposed method, the overall system stability margin is predictable and improved controller performance is achieved as well. The proposed method is implemented experimentally to show the accurate stability margin calculation as well as the excellent steady state and dynamic performances of the repetitive control scheme. [ABSTRACT FROM PUBLISHER]

This paper presents a novel matrix converter with one ac input and two ac outputs. The presented topology is based on the traditional indirect matrix converter, but with its rear-end six-switch inverter replaced by a compact nine-switch inverter. With only three extra switches added, the proposed converter can produce two sets of three-phase ac outputs, whose amplitudes, frequencies, and phases can appropriately be regulated. Features such as sinusoidal input and outputs, unity input power factor and minimum commutation count are all retained by the proposed topology, despite having an additional output. Its modulation is realized by the computationally less intensive carrier-based method, whose unique carrier requirements can easily be managed within a programmable logic device. Mathematical proof for validating sinusoidal input and outputs achieved by this modulation technique is also discussed, before being verified in simulation and experimentally, together with other findings. [ABSTRACT FROM AUTHOR]

This study proposes an advanced current control strategy for three-phase grid-connected inverters to reject the impact of the dc offsets and scaling errors in the grid voltage measurement on the grid current performance. The proposed current controller designed in the synchronous (d-q) reference frame is developed with a proportional integral (PI) plus three vector PI controllers. The PI controller regulates the fundamental current to follow its reference, meanwhile, three vector PI controllers tuned at the fundamental grid frequency ( \omega _s), 2\omega _s, 6\omega _s are employed to eliminate the dc, unbalance, harmonic components in the grid current. As a result, the three-phase grid currents are controlled to be balanced, sinusoidal, and extremely low dc component despite the presence of the dc offset and scaling errors in the grid voltage measurement and distorted grid voltage conditions. The main advantage of the proposed control scheme is that it is developed without the need of additional hardware circuit, dc extraction, and harmonic detection scheme so that it can be integrated into the existing grid-connected inverter system without extra cost. The effectiveness of the suggested solution is verified by experimental results under various grid voltage conditions and the grid voltage measurement errors. [ABSTRACT FROM PUBLISHER]

In the electrical engineering field, there are two types of system which can potentially generate resonance under excitation, one is the electrical system with inductor and capacitor, the other is the mechanical system with spring-mass characteristic. A lot of research on active damping control algorithms for grid-connected inverters with LCL filter and inverter-driven machine with multirotating masses have been demonstrated. However, research works for these two systems were carried out independently and there is a lack of systematic comparison for modelling and control between these two systems. This article will unify the mathematical models and active damping control algorithms for these two systems. It is found that the mathematical models and control structures are fundamentally the same. The existing or future potential active damping control algorithms used in electrical system can be applied in mechanical system and vice versa to avoid reinventing the wheel. Parameter sensitivity analysis for controller and feedback gains was performed for electrical systems in the discrete z-domain. For mechanical systems, it is found that a substantial electromagnetic torque overshoot was introduced when applying the active damping control and it was analyzed quantitatively with various damping coefficients to guide the inverter design. Finally, experimental tests were done to verify the findings. [ABSTRACT FROM AUTHOR]

Droop schemes have traditionally been applied to the control of parallel synchronous generators in power systems. It has subsequently been brought over to the control of distributed generators (DGs) in microgrids with the same retained objective of proportional power sharing based on ratings. This objective might, however, not suit microgrids well since DGs are usually of different types, unlike synchronous generators. Other factors like cost, efficiency, and emission penalty of each DG at different loading must be considered since they contribute directly to the total generation cost (TGC) of the microgrid. To reduce this TGC without relying on fast communication links, an autonomous droop scheme is proposed here, whose resulting power sharing is decided by the individual DG generation costs. Comparing it with the traditional scheme, the proposed scheme retains its simplicity and it is hence more likely to be accepted by the industry. The reduction in TGC has been verified by experiment. [ABSTRACT FROM PUBLISHER]

This paper proposes a multiple-input versatile matrix converter (VMC) for integrating hybrid ac/dc energy resources and storages to the power grid. The VMC is developed from the traditional indirect matrix converter but operates in the reverse-boost mode rather than in the forward-buck mode. The reverse-boost mode is more relevant here since most renewable sources and energy storages have lower voltages than the grid. The eventual VMC developed uses an alternative nine-switch converter, rather than usual six-switch voltage-source converter, for providing six input terminals in total. One three-phase ac source and three dc sources, or other source combinations, can therefore be connected to the VMC. Powers from these sources are channeled to the three-phase utility grid through the VMC's current-source inverter. Their proper dispatches are guaranteed by the proposed control and modulation schemes, which also help maintain near-sinusoidal input and output current waveforms. Mathematical proofs, simulation, and experimental results have shown that the VMC can indeed operate as intended. [ABSTRACT FROM PUBLISHER]