Search

A compact interlinking converter modular (ICM) for hybrid ac/dc microgrids with a distributed storage (DS) bus for storage integration is proposed in this article. The advanced ICM for hybrid ac/dc/ds microgrids involves the nine-switch topology with compact configuration and decreased number of active operating switches, which structurally equivalents to afford a dc interconnection port for dc subgrid, an ac interconnection port for ac subgrid, a ds interconnection port for ds subgrid, and two dc–dc converters for the interconnection ports for parallel DSs. In addition to the popular advantage of component elements saving, the suggested ICM, aggregating various interlinking converter cells (ICCs) into an ICM, is also proficient of participating computations from all ICC sensors to enhance the overall modular performance without building extra communication connection links between ICCs. With this in mind, a decentralized power management control strategy is realized by employing a coordination power control methodology to systematically handle various distributed generations (DGs), DSs, and ICM in a decentralized manner with improved communication fault ride-through capability. The controller hardware-in-the-loop experiments on a real-time digital simulator platform validates the achievement of the advanced ICM application in hybrid ac/dc/ds microgrids and the effectiveness of the associated decentralized power management scheme. [ABSTRACT FROM AUTHOR]

The hybrid fuel cell/supercapacitor (FC/SC) system is a promising onboard power supply system for more electric aircraft (MEA), where system stability is a critical issue due to the high penetration of constant power loads (CPLs) in MEA. This article proposes a composite finite-time controller for decentralized power sharing and stabilization of the hybrid FC/SC system with CPLs. It consists of an integral droop (ID) + finite-time controller for the SC converter and a proportional droop (PD) + finite-time controller for the FC converter. First, the coordination of PD and ID achieves decentralized power sharing between FC and SC such that SC only compensates fast fluctuations and FC provides smooth power at the steady state. Then, a finite-time observer is designed to provide feedforward compensation for the disturbances and enables accurate tracking with fast dynamics. Finally, a composite finite-time controller is constructed following a nonrecursive synthesis procedure with a rigorous large signal stability analysis. The proposed controller guarantees finite-time convergence even under large signal variations and can be easily implemented with a practical gain tuning procedure. Simulations and experiments are conducted to verify the proposed technique. [ABSTRACT FROM AUTHOR]

CLLC-type dc transformer (CLLC-DCT) is very popular in the hybrid ac–dc microgrid thanks to its high-power density advantage and good bidirectional power transfer capacity. In the hybrid ac/dc microgrid, the open-loop control is always utilized by the CLLC-DCT to cooperate with the bidirectional interlinking converter to realize the power and voltage conversion between the ac and dc bus. This paper first studies the circuit parameters design of the open-loop controlled CLLC-DCT with consideration of such a realistic problem: The real inductors/capacitors values are actually different with their theoretically designed values due to the operation power and temperature variation. To solve this problem, a robust circuit parameters design scheme is proposed for the CLLC-DCT in this paper. With the proposed scheme, the designed CLLC-DCT exhibits good power transmission and voltage regulation ability in the hybrid ac/dc microgrid even when its actual inductors/capacitors values vary with the practical power and temperature. The robust design method is experimentally verified in a hybrid ac/dc microgrid prototype. [ABSTRACT FROM AUTHOR]

This paper presents a uniform control strategy for the bidirectional ac/dc interlinking converter (BIC) in hierarchical controlled hybrid microgrid. The uniform control strategy unifies different control structures for multifunctional BIC in terms of power management, ac and dc voltage support. With the unified control structure, various triggering mechanisms for BIC mode-switch are not compulsory in response to the relevant scenario changes in the power network. Therefore, the negative consequences, such as unsmooth transition and system collapse due to the inaccurate or slower mode switch, can be avoided. Moreover, the uniform control strategy is also applicable for the hierarchical controlled hybrid microgrid, whose control architecture is typically comprised of the centralized and decentralized levels. This enables the communication fault ride-through capability and the impact from the communication failures can thus be mitigated. To sum up the above two features, the proposed control strategy is able to provide a smooth operation for the BIC without control mode switch in the event of unintentional scenario changes in power or communication network. To verify the validity of the proposed uniform control strategy, the controller hardware-in-the-loop experimental results have been provided in this paper. [ABSTRACT FROM PUBLISHER]

For hybrid energy storage system in dc microgrid, effective power split, bus voltage deviation, and state-of-charge (SoC) violation are significant issues. Conventionally, they are achieved by centralized control or hierarchical control methods with communications. This paper proposes a simple and effective strategy to solve the problem in a decentralized manner. A high-pass filter-based droop (HPFD) controller is proposed to regulate the battery converter, and a virtual capacitance droop (VCD) controller is implemented for a supercapacitor (SC) converter. The cooperation of HPFD and VCD first achieves autonomous power split that high-frequency fluctuation is buffered by SC and low-frequency power is supplied by battery. Meanwhile, the bus voltage deviation induced by the droop-based power sharing is eliminated automatically at steady state. The resulted bus voltage restoration simultaneously enforces SC SoC back to its nominal value, and, thus, ensures continuous operation of SC as a power buffer without the violation of its SoC boundary. A design guideline is developed to ensure expected system dynamics. The effectiveness of the proposed method and analytical results are validated by simulations and experiments. [ABSTRACT FROM PUBLISHER]

Power allocation is a major concern in hybrid energy storage system. This paper proposes an extended droop control (EDC) strategy to achieve dynamic current sharing autonomously during sudden load change and resource variations. The proposed method consists of a virtual resistance droop controller and a virtual capacitance droop controller for energy storages with complementary characteristics, such as battery and supercapacitor (SC). By using this method, battery provides consistent power and SC only compensates high-frequency fluctuations without the involvement of conventionally used centralized controllers. To implement the proposed EDC method, a detailed design procedure is proposed to achieve the control objectives of stable operation, voltage regulation, and dynamic current sharing. System dynamic model and relevant impedances are derived and detailed frequency domain analysis is performed. Moreover, the system level stability analysis is investigated and system expansion with the proposed method is illustrated. Both simulations and experiments are conducted to validate the effectiveness of the proposed control strategy and analytical results. [ABSTRACT FROM PUBLISHER]

This paper presents a distributed control scheme for reliable autonomous operation of a hybrid three-port ac/dc/distributed storage (ds) microgrid by means of power sharing in individual network, power exchange between ac and dc networks, and power management among three networks. The proposed distributed control scheme includes: 1) a fully decentralized control, which is achieved by local power sharing (LPS) in individual ac or dc network, global power sharing (GPS) throughout ac/dc networks, and storage power sharing (SPS) among distributed storages. Upon fully decentralized control, each power module can operate independently without communication links. This would benefit for riding through communication malfunction in multilayer supervision control system; 2) a multilevel power exchange control for scheduling LPS, GPS, and SPS has been developed to reduce unnecessary power exchange between ac/dc networks and operations of DS units with the benefit of reducing power exchange losses and prolonging storage lifetime. The proposed distributed control strategy has been verified by the simulation and experimental results. [ABSTRACT FROM PUBLISHER]